journal article·2009-10

Microstructural Changes Produced by Fatigue in High-Purity Copper Severely Deformed by Cryogenic Rolling

Kai Zhang, J.R. Weertman

Publisher page

Abstract

High-purity Cu (99.995 pct pure) rods were cryogenically rolled through a 90 pct reduction in area and given a very brief low-temperature anneal. The resultant material was highly textured, had very low internal strains, and had a broad distribution of grain sizes with an average grain size of 150 to 300 nm. Samples were tested in stress-control tension-tension fatigue. Fatigue life was strongly improved over that of coarse-grain (CG) copper. The cycling caused significant softening and grain growth, especially at the lower stress amplitudes. Plastic strain was small but creep was evident. Clusters of long parallel protrusions that were quite uniformly spaced about 100 nm apart formed on the sample surfaces during fatiguing. Among the various microstructures seen in the fatigued specimens, transmission electron microscopy (TEM) pictures taken just inside the surface showed parallel dislocation lines many micrometers in length spaced about 100 nm from one another. It is possible that these dislocations are involved in the formation of the protrusions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. A. Vinogradov, V. Patlan, S. Hashimoto, and K. Kitagawa: Phil. Mag. A, 2002, vol. 82, pp. 317–35.10.1080/01418610208239601 ↗
2. A. Vinogradov, S. Hashimoto, V. Patlan, and K. Kitagawa: Mater. Sci. Eng. A, 2001, vols. A319–A321, pp. 862–66.10.1016/S0921-5093(01)01057-7 ↗
3. L. Kunz, P. Lukás, and M. Svoboda: Mater. Sci. Eng. A, 2006, vol. A424, pp. 97–104.10.1016/j.msea.2006.02.029 ↗
4. P. Lukás. L. Kunz, and M. Svoboda: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1910–15.10.1007/s11661-007-9108-7 ↗
5. H. Mughrabi and H.W. Höppel: MRS Proceedings, D. Farkas et al., eds., Materials Research Society, Warrendale, PA, 2001, vol. 634, pp. B2.1.1–B2.1.12.
6. H.W. Höppel, Z.M. Zhou, H. Mughrabi, and R.Z. Valiev: Phil. Mag. A, 2002, vol. 82, pp. 1781–94.10.1080/01418610208235689 ↗
7. H. Mughrabi, H.W. Höppel, and M. Kautz: Scripta Mater., 2004, vol. 51, pp. 807–12.10.1016/j.scriptamat.2004.05.012 ↗
8. H.W. Höppel, M. Kautz, C. Xu, M. Murashkin, T.G. Langdon, R.Z. Valiev, and H. Mughrabi: Int. J. Fatigue, 2006, vol. 28, pp. 1001–10.10.1016/j.ijfatigue.2005.08.014 ↗
9. M. Goto, S.Z. Han, T. Yakushiji, C.Y. Lim, and S.S. Kim: Scripta Mater., 2006, vol. 24, pp. 2101–06.10.1016/j.scriptamat.2006.03.001 ↗
10. M. Goto, S.Z. Han, S.S. Kim, N. Kawagoishi, and C.Y. Lim: Scripta Mater., 2007, vol. 57, pp. 293–96.10.1016/j.scriptamat.2007.04.040 ↗
11. S.D. Wu, Z.G. Wang, C.B. Jiang, G.Y. Li, I.V. Alexandrov, and R.Z. Valiev: Mater. Sci. Eng. A, 2004, vols. A387–A389, pp. 560–64.
12. S.R. Agnew and J.R. Weertman: Mater. Sci. Eng. A, 1998, vol. A244, pp. 145–53.10.1016/S0921-5093(97)00689-8 ↗
13. S.R. Agnew, A. Yu. Vinogradov, S. Hashimoto, and J.R. Weertman: J. Electron. Mater., 1999, vol. 28, pp. 1038–44.10.1007/s11664-999-0181-0 ↗
14. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
15. Physical Metallurgy, 3rd ed., R.W. Cahn and P. Haasen, eds., North Holland Physics Publishing, New York, NY, 1983, pp. 1563–78.
16. A.B. Witney, P.G. Sanders, J.R. Weertman, and J.A. Eastman: Scripta Metall. Mater., 1995, vol. 33, pp. 2025–30.10.1016/0956-716X(95)00441-W ↗
17. H.P. Klug and L.E. Alexander: X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., Wiley, New York, NY, 1974, pp. 661–65.
18. C.J. Shute, B.D. Myers, S. Xie, T.W. Barbee Jr., A.M. Hodge, and J.R. Weertman: Scripta Mater., 2009, vol. 60, pp. 1073–77.10.1016/j.scriptamat.2008.11.049 ↗
19. D. Tabor: The Hardness of Metals, Oxford University Press, London, 1951, p. 107.
20. B. Moser, T. Hanlon, K.S. Kumar, and S. Suresh: Scripta Mater., 2006, vol. 54, pp. 1151–55.10.1016/j.scriptamat.2005.11.054 ↗
21. B.E. Warren: X-ray Diffraction, Dover, New York, 1990, p. 290.
22. Kai Zhang and J.R. Weertman: Appl. Phys. Lett., 2005, vol. 87, pp. 061921-1–061921-3.10.1063/1.2008377 ↗
23. K. Zhang, I.V. Alexandrov, A.R. Kilmametov, R.Z. Valiev, and K. Lu: J. Phys. D: Appl. Phys., 1997, vol. 30, pp. 3008–15.10.1088/0022-3727/30/21/015 ↗
24. Y. Amouyal and E. Rabkin: Acta Mater., 2007, vol. 55, pp. 6681–89.10.1016/j.actamat.2007.08.023 ↗