journal article·2005-07

Stress and strain localization three-dimensional modeling for particle-reinforced metal matrix composites

H. Shen, C. J. Lissenden

Publisher page

Abstract

The ductility of particle-reinforced metal matrix composites (PR MMCs) is reduced by the localization of stress and strain, which is exacerbated by microstructural heterogeneity, especially particle clustering. Herein, the effect of particle distribution on the macroscopic and microscopic response has been studied using three distinct types of three-dimensional (3D) finite-element model: a repeating unit cell, a multiparticle model, and a clustered particle model. While the repeating unit cell model represents a cubic periodic array of particles, the multiparticle model represents a random distribution of particles contained in a cube of matrix material, and the clustered particle model represents an artificially clustered distribution of particles. These models were used to study the macroscopic tensile stress-strain response as well as the underlying stress and strain fields. The results indicate that a clustered microstructure leads to a stiffer response with more hardening than that of random and periodic microstructures. Plastic flow and hydrostatic stress localization in the matrix and maximum principal stress localization in the particles are significantly higher in the clustered microstructure. Damage is expected to initiate in the cluster regions leading to low ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. B. Maruyama: Adv. Mater. Processes, 1999, vol. 6, pp. 47–50.
2. A.M. Murphy, S.J. Howard, and T.W. Clyne: Mater. Sci. Technol., 1998, vol. 14, pp. 959–68.10.1179/026708398790613353 ↗
3. Y. Flom and R.J. Arsenault: Acta Metall., 1989, vol. 37, pp. 2413–23.10.1016/0001-6160(89)90039-4 ↗
4. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composite, 1st ed., Cambridge University Press, Cambridge, MA, 1993.10.1017/CBO9780511623080 ↗
5. T.H. Yip and Z. Wang: Mater. Sci. Technol., 1997, vol. 13, pp. 125–34.10.1179/mst.1997.13.2.125 ↗
6. Z. Zhou, H.X. Peng, Z. Fan, and D.X. Li: Mater. Sci. Technol., 2000, vol. 16, pp. 908–12.10.1179/026708300101508676 ↗
7. J. Llorca, A. Needleman, and S. Suresh: Acta Metall. Mater., 1991, vol. 39, pp. 2317–35.10.1016/0956-7151(91)90014-R ↗
8. Y.L. Shen, M. Finot, A. Needleman, and S. Suresh: Acta Metall. Mater., 1994, vol. 42, pp. 77–97.10.1016/0956-7151(94)90050-7 ↗
9. S.F. Corbin and D.S. Wilkinson: Acta Metall. Mater., 1994, vol. 42, pp. 1311–18.10.1016/0956-7151(94)90147-3 ↗
10. M. Geni and M. Kikuchi: Acta Mater., 1998, vol. 46, pp. 3125–33.10.1016/S1359-6454(98)00004-4 ↗
11. J.W. Leggoe, A.A. Mammoli, M.B. Bush, and X.Z. Hu: Acta Mater., 1998, vol. 46, pp. 6075–88.10.1016/S1359-6454(98)00279-1 ↗
12. M. Li, S. Ghosh, O. Richmond, H. Weiland, and T.N. Rouns: Mater. Sci. Eng., 1999, vol. A265, pp. 153–73.10.1016/S0921-5093(98)01132-0 ↗
13. J.D. Wolodko, Z. Xia, and F. Ellyin: Mater. Sci. Technol., 2000, vol. 16, pp. 837–42.10.1179/026708300101508531 ↗
14. A. Borbely, H. Biermann, and O. Hartmann: Mater. Sci. Eng., 2001, vol. A313, pp. 34–45.10.1016/S0921-5093(01)01144-3 ↗
15. H.J. Bohm and W. Han: Modeling Simul. Mater. Sci. Eng., 2001, vol. 9, pp. 47–65.10.1088/0965-0393/9/2/301 ↗
16. W. Han, A. Eckschlager, and H.J. Bohm: Compos. Sci. Technol., 2001, vol. 61, pp. 1581–90.10.1016/S0266-3538(01)00061-6 ↗
17. H.J. Bohm, A. Eckschlager, and W. Han: Comput. Mater. Sci., 2002, vol. 25, pp. 42–53.10.1016/S0927-0256(02)00248-3 ↗
18. J. Segurado and J. Llorca: J. Mech. Phys. Solids, 2002, vol. 50, pp. 2107–21.10.1016/S0022-5096(02)00021-2 ↗
19. J. Segurado, J. Llorca, and C. Gonzalez: Scripta Mater., 2002, vol. 46, pp. 525–29.10.1016/S1359-6462(02)00027-1 ↗
20. J. Segurado, C. Gonzalez, and J. Llorca: Acta Mater., 2003, vol. 51, pp. 2355–69.10.1016/S1359-6454(03)00043-0 ↗
21. H. Shen and C.J. Lissenden: Mater. Sci. Eng., 2002, vol. A338, pp. 271–81.10.1016/S0921-5093(02)00094-1 ↗
22. C. Liu, G. Michal, and J.J. Lewandowski: in Residual Stresses in Composites, E.V. Barrera and I. Dutta, eds., TMS, Warrendale, PA, 1993, pp. 239–56.
23. ASM International Handbook Committee: Metals Handbook, ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2.
24. C.H. Andersson and R. Warren: Composites, 1984, vol. 15, pp. 16–23.10.1016/0010-4361(84)90956-X ↗
25. ABAQUS Standard Ver. 5–8 Theory Manual, Hibbitt, Karlsson, Sorensen, Inc., Pawtucket, RI, 1997.
26. H. Shen: Ph.D. Thesis, Pennsylvania State University, University Park, PA, 2003.
27. C.Z. Mooney: Monte Carlo Simulation, Sage Publications, Thousand Oaks, CA, 1997.10.4135/9781412985116 ↗
28. J.R. Brockenbrough, S. Suresh, and H.A. Wienecke: Acta Metall. Mater., 1991, vol. 39, pp. 735–52.10.1016/0956-7151(91)90274-5 ↗
29. X. Lei and C.J. Lissenden: in Composite Materials: Testing and Design, Fourteenth Volume, ASTM STP 1436, C.E. Bakis, ed., ASTM International, West Conshohocken, PA, 2003, pp. 255–72.10.1520/STP38416S ↗
30. Z. Hashin and S. Shtrikman: J. Mech. Phys. Solids, 1963, vol. 12, pp. 127–40.10.1016/0022-5096(63)90060-7 ↗
31. D. McDanels: Metall. Trans. A, 1985, vol. 16A, pp. 1105–15.10.1007/BF02811679 ↗
32. J.D. Eshelby: Proc. R. Soc. London, 1957, vol. A241, pp. 376–396.
33. R.J. Arsenault, N. Shi, C.R. Feng, and L. Wang: Mater. Sci. Eng., 1991, vol. 131, pp. 55–68.10.1016/0921-5093(91)90344-M ↗