Influence of Laser Processing Parameters on Microstructure and Corrosion Kinetics of Laser-Treated ZE41 Magnesium Alloy
Source abstract
Abstract
In the present study, surface melting of a magnesium alloy, ZE41, was performed with an Nd:YAG laser using different laser parameters. The microstructure of the laser-treated and untreated specimens was analyzed by optical and scanning electron microscopy and X-ray diffraction. Corrosion resistance of the different laser-treated specimens along with the untreated alloy was characterized using electrochemical impedance spectroscopy and weight loss measurements in 0.001 M sodium chloride solution. Although the laser processing parameters influenced the microstructure and the melt depth of the laser-treated zone, these had little effect on the corrosion resistance of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. N. Pebere, C. Riera and F. Dabosi, Electrochim. Acta, 1990, vol. 35, p. 555.10.1016/0013-4686(90)87043-2 ↗
2. A. Pardo, M.C. Merino, A.E. Coy, R. Arrabal, F. Viejo and E. Matykina, Corros. Sci., 2008, vol. 50, no. 3, p. 823.10.1016/j.corsci.2007.11.005 ↗
3. S.K. Das and L.A. Davis, Mater. Sci. Eng., 1988, vol. 98, p. 1.10.1016/0025-5416(88)90116-4 ↗
4. G. Song, A. Atrens, W. Xianliang and B. Zhang, Corros. Sci., 1998, vol. 40, no. 10, p. 1769.10.1016/S0010-938X(98)00078-X ↗
5. G. Song, A. Atrens and M. Dargusch, Corros. Sci., 1998, vol. 41, no. 2, p. 249.10.1016/S0010-938X(98)00121-8 ↗
6. R.K.S. Raman, Metall. Mater. Trans. A, 2004, vol. 35A, p. 2525.10.1007/s11661-006-0233-5 ↗
7. M.C. Zhao, M. Liu, G.L. Song and A. Atrens, Adv. Eng. Mater., 2008, vol. 10, nos. 1–2, p. 104.10.1002/adem.200700246 ↗
8. W.C. Neil, M. Forsyth, P.C. Howlett, C.R. Hutchinson and B.R.W. Hinton, Corros. Sci., 2009, vol. 51, no. 2, p. 387.10.1016/j.corsci.2008.11.005 ↗
9. W.C. Neil, M. Forsyth, P.C. Howlett, C.R. Hutchinson and B.R.W. Hinton, Corros. Sci., 2011, vol. 53, no. 10, p. 3299.10.1016/j.corsci.2011.06.005 ↗
10. Y. Song, D. Shan, R. Chen, F. Zhang and E.-H. Han, Corros. Sci., 2009, vol. 51, no. 1, p. 62.10.1016/j.corsci.2008.10.001 ↗
11. S. Izumi, M. Yamasaki and Y. Kawamura, Corros. Sci., 2009, vol. 51, no. 2, p. 395.10.1016/j.corsci.2008.11.003 ↗
12. G.L. Makar and J. Kruger, J. Electrochem. Soc., 1990, vol. 137, no. 2, p. 414.10.1149/1.2086455 ↗
13. M. Qian, D. Li and C. Jin, Sci. Technol. Adv. Mat., 2008, 9, no. 2, p. 025002.10.1088/1468-6996/9/2/025002 ↗
14. P. Volovitch, J.E. Masse, A. Fabre, L. Barrallier and W. Saikaly, Surf. Coat. Tech., 2008, vol. 202, no. 20, p. 4901.10.1016/j.surfcoat.2008.04.052 ↗
15. Y. Gao, C. Wang, Q. Lin, H. Liu and M. Yao, Surf. Coat. Tech., 2006, vol. 201, no. 6, p. 2701.10.1016/j.surfcoat.2006.05.011 ↗
16. R. Subramanian, S. Sircar and J. Mazumdar, J. Mater. Sci., 1991, vol. 26, p. 951.10.1007/BF00576771 ↗
17. A.A. Wang, S. Sircar and J. Mazumder, J. Mater. Sci., 1993, vol. 28, p. 5113.10.1007/BF00570050 ↗
18. J.D. Majumdar, R. Galun, B.L. Mordike and I. Manna, Mater. Sci. Eng. A, 2003, vol. 361, p. 119.10.1016/S0921-5093(03)00519-7 ↗
19. A.E. Coy, F. Viejo, F.J. Garcia–Garcia, Z. Liu, P. Skeldon and G.E. Thompson, Corros. Sci., 2010, vol. 52, no. 2, p. 387.10.1016/j.corsci.2009.09.025 ↗
20. Y.C. Guan, W. Zhou and H.Y. Zheng, J. Appl. Electrochem., 2009, vol. 39, no. 9, p. 1457.10.1007/s10800-009-9825-2 ↗
21. Y. Gao, C. Wang, M. Yao and H. Liu, Mater. Corros., 2007, vol. 58, no, 6, p. 463.10.1002/maco.200604031 ↗
22. L.F. Guo, T.M. Yue and H.C. Man, J. Mater. Sci., 2005, vol. 40, no. 13, p. 3531.10.1007/s10853-005-2888-5 ↗
23. S.Y. Liu, J.D. Hu, Y. Yang, Z.X. Guo and H.Y. Wang, Appl. Surf. Sci., 2005, vol. 252, p. 1723.10.1016/j.apsusc.2005.03.110 ↗
24. G. Abbas, Z. Liu and P. Skeldon, Appl. Surf. Sci., 2005, vol. 247, nos. 1–4, p. 347.10.1016/j.apsusc.2005.01.169 ↗
25. R.K.S. Raman, S. Murray and M. Brandt, Surf. Eng., 2007, vol. 23, p. 107.10.1179/174329407X169511 ↗
26. A. Koutsomichalis, L. Saettas and H. Badekas, J. Mater. Sci., 1994, vol. 29, p. 6543.10.1007/BF00354019 ↗
27. D. Dubé, M. Fiset, A. Couture and I. Nakatsugawa, Mater. Sci. Eng. A, 2001, vol. 299, no. 1–2, p. 38.10.1016/S0921-5093(00)01414-3 ↗
28. J.D. Majumdar, T. Maiwald, R. Galun, B.L. Mordike and I. Manna, Laser. Eng., 2002, vol. 12, no. 3, p. 147.10.1080/0898150021000039275 ↗
29. P.C. Banerjee, R.K.S. Raman, Y. Durandet and G. McAdam, Corros. Sci., 2011, vol. 53, no. 4, p. 1505.10.1016/j.corsci.2011.01.017 ↗
30. Y. Durandet, S. Sun and M. Brandt, Mater. Sci. Forum, 2010, vol. 654–656, p. 759.10.4028/www.scientific.net/MSF.654-656.759 ↗
31. S.K. Das, B.H. Kear, and C.M. Adams, eds.: Rapidly Solidified Crystalline Alloys. 1985, The Metallurgical Society, Warrendale, PA.
32. A.S. Khanna, R.K. Singh Raman, E.W. Kreutz and A.L.E. Terrance, Corros. Sci., 1992, vol. 33, no. 6, p. 949.10.1016/0010-938X(92)90057-A ↗
33. A. Conde, I. Garcia and J.J. de Damborenea, Corros. Sci., 2001, vol. 43, no. 5, p. 817.10.1016/S0010-938X(00)00114-1 ↗
34. Y.S. Lim, H.P. Kim, J.H. Han, J.S. Kim and H.S. Kwon, Corros. Sci., 2001, vol. 43, no. 7, p. 1321.10.1016/S0010-938X(00)00149-9 ↗
35. M.C. García-Alonso, M.L. Escudero, V. López and A. Macías, Corros. Sci., 1996, vol. 38, no. 3, p. 515.10.1016/0010-938X(96)00151-5 ↗
36. S. Virtanen, H. Böhni, R. Busin, T. Marchione, M. Pierantoni and E. Blank, Corros. Sci., 1994, vol. 36, no. 9, p. 1625.10.1016/0010-938X(94)90058-2 ↗
37. K. Hashimoto, N. Kumagai, H. Yoshioka, J.H. Kim, E. Akiyama, H. Habazaki, S. Mrowec, A. Kawashima and K. Asami, Corros. Sci., 1993, vol. 35, nos. 1–4 pt 1, p. 363.10.1016/0010-938X(93)90168-G ↗
38. American Society for Testing and Materials, ASTM G1-90, ASTM G1-90: Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, 1999.
39. D.A. Jones, Principles and Prevention of Corrosion, 1996, Prentice Hall, NJ, USA.
40. X. Cao, M. Jahazi, J.P. Immarigeon and W. Wallace, J. Mater. Process Tech., 2006, vol. 171, no. 2, p. 188.10.1016/j.jmatprotec.2005.06.068 ↗
41. F. Zucchi, V. Grassi, A. Frignani, C. Monticelli and G. Trabanelli, J. Appl. Electrochem., 2006, vol. 36, p. 195.10.1007/s10800-005-9053-3 ↗
42. G. Baril and N. Pébère, Corros. Sci., 2001, vol. 43, no. 3, p. 471.10.1016/S0010-938X(00)00095-0 ↗
43. E. Barsoukov and J.R. Macdonald, eds.: Impedance Spectroscopy: Theory, Experiment, and Applications, 2nd ed. Wiley, Hoboken, 2005.10.1002/0471716243 ↗
44. M.E. Orazem and B. Tribollet: in Electrochemical Impedance Spectroscopy, Wiley, Hoboken, 2008.10.1002/9780470381588 ↗
45. W. Liu, F. Cao, A. Chen, L. Chang, J. Zhang and C. Cao, Corros. Sci., 2010, vol. 52, no. 2, p. 627.10.1016/j.corsci.2009.10.031 ↗
46. F. Zucchi, A. Frignani, V. Grassi, A. Balbo and G. Trabanelli, Mater. Chem. Phys., 2008, vol. 110, nos. 2–3, p. 263.10.1016/j.matchemphys.2008.02.015 ↗
47. P. Chakraborty Banerjee and R.K. Singh Raman, Electrochimica Acta, 2011, vol 56, no. 11, p. 3790.10.1016/j.electacta.2011.02.050 ↗