Annealing behavior of alumina dispersion-strengthened copper strips rolled under different conditions
Source abstract
Abstract
A study has been made of annealing behavior of a boron-added alumina dispersion-strengthened copper (ADSC) strip, Glidcop Al-25, and specimens fabricated by rolling of the strip by 25 to 28 pct under various conditions. All the specimens, including the starting strip, had similar microstructures consisting of microbands aligned parallel to the rolling direction. The textures of the specimens were characterized by β fiber, which runs from the copper orientation {112}〈111〉 over the S orientation {123}〈634〉 to the brass orientation {110}〈112〉 in the Euler orientation space, with the intensities in the S and the brass components being higher than the copper component and with the S components having higher intensities than the brass component in the surface layers. When annealed at 1123 K for 1 hour, the center region of the starting strip and cold-rolled specimens underwent recrystallization, with recrystallization texture being approximated by {112}〈312〉, whereas the specimens rolled at 813 K did not undergo recrystallization through the thickness. These results have been discussed based on detailed microstructures and microtextures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A.V. Nadkarni: High Conductivity Copper and Aluminum Alloys, E. Ling and W. Taubenblat, eds., TMS-AIME, Warrendale, PA, 1984, pp. 77–101.
2. O. Preston and N.J. Grant: Trans. TMS-AIME, 1961, vol. 221, pp. 164–73.
3. J.L. Brimhall, M.J. Klein, and R.A. Huggins: Acta Metall., 1966, vol. 14, pp. 459–66.10.1016/0001-6160(66)90313-0 ↗
4. S.-H. Kim and D.N. Lee: Mater. Sci. Technol., 1999, vol. 15, pp. 352–54.10.1179/026708399101506120 ↗
5. S.A. Fabritsiev, S.J. Zinkle, and B.N. Singh: J. Nucl. Mater., 1996, vol. 237, pp. 127–37.10.1016/S0022-3115(96)00091-8 ↗
6. A.F. Rowcliffe, S.J. Zinkle, J.F. Stubbins, D.J. Edwards, and D.J. Alexander: J. Nucl. Mater., 1998, vol. 263, pp. 183–92.10.1016/S0022-3115(98)00333-X ↗
7. S. Sato, T. Hatano, T. Kuroda, K. Furuya, S. Hara, M. Enoeda, and H. Takatsu: J. Nucl. Mater., 1998, vol. 263, pp. 265–70.10.1016/S0022-3115(98)00360-2 ↗
8. J.J. Stephens, J.A. Romero, and C.R. Hills: Microstr. Sci., 1988, vol. 16, pp. 245–64.
9. D.A. Gallagher, E.W. Hoyt, and R.E. Kirby: J. Mater. Sci., 1992, vol. 27, pp. 5926–30.10.1007/BF01119762 ↗
10. C. Rigollet, J.M. Gentzbittel, and G. Robert: J. Phys., 1993, vol. 7C, pp. 747–50.
11. G.H. Gessinger: Metall. Trans. A, 1976, vol. 7A, pp. 1203–09.10.1007/BF02656604 ↗
12. J.J. Stephens and W.D. Nix: Metall. Trans. A, 1985, vol. 16A, pp. 1307–24.10.1007/BF02670335 ↗
13. R.C. Klug, G. Krauss and D.K. Matlock: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1945–59.10.1007/BF02651944 ↗
14. M.A. Miodownik, A.J. Wilkinson, and J.W. Martin: Acta Mater., 1998, vol. 46, pp. 2809–21.10.1016/S1359-6454(97)00460-6 ↗
15. S. Matthies, G.W. Vinel, and K. Helming: Standard Distributions in Texture Analysis, Akademie-Verlag Berlin, Berlin, 1987, vol. 1.10.1515/9783112736173 ↗
16. D.A. Hughes and N. Hansen: Acta Mater., 1997, vol. 45, pp. 3871–86.10.1016/S1359-6454(97)00027-X ↗
17. C.T. Young, J.H. Steele, Jr., and J.L. Lytton: Metall. Trans., 1973, vol. 4, pp. 2081–89.10.1007/BF02643271 ↗
18. V. Randle: The Measurement of Grain Boundary Geometry, Institute of Physics Publishing, Bristol, United Kingdom, 1993.
19. F.F. Lange: Acta Metall., 1967, vol. 15, pp. 311–18.10.1016/0001-6160(67)90207-6 ↗
20. K.-K. Um, H.-T. Jeong, J.-K. An, D.N. Lee, G. Kim, and O. Kwon: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 58–64.10.2355/isijinternational.40.58 ↗
21. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
22. H. Hu, P.R. Sperry, and P.A. Beck: Trans. AIME, 1952, vol. 194, pp. 76–81.
23. O. Engler: Acta Mater., 2000, vol. 48, pp. 4827–40.10.1016/S1359-6454(00)00272-X ↗
24. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2883–2904.10.1016/0001-6160(88)90173-3 ↗
25. A.W. Bowen, M.G. Ardakani, and F.J. Humphreys: Proc. ICOTOM 10, H.J. Bunge, ed., Trans Tech Pub., Aedermannsdorf, Switzerland, 1993, pp. 919–26.
26. K. Murakami, K. Mino, H. Harada, and H.K.D.H. Bhadeshia: Metall. Trans. A, 1993, vol. 24A, pp. 1049–55.10.1007/BF02657235 ↗
27. R. Hotzler and T.K. Glasgow: Metall. Trans. A, 1982, vol. 13A, pp. 1665–74.10.1007/BF02647821 ↗
28. T.S. Chou: Mater. Sci. Eng. A, 1997, vol. 223A, pp. 78–90.10.1016/S0921-5093(96)10473-1 ↗
29. B.J. Duggan and W.B. Lee: Proc. ICOTOM 8, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1988, pp. 625–30.
30. J.J. Petrovic and L.J. Ebert: Metall. Trans., 1972, vol. 3, pp. 1123–29.10.1007/BF02642443 ↗
31. J.J. Petrovic and L.J. Ebert: Metall. Trans., 1972, vol. 3, pp. 1131–36.10.1007/BF02642444 ↗
32. R.F. Singer and G.H. Gessinger: Metall. Trans. A, 1982, vol. 13A, pp. 1463–70.10.1007/BF02642885 ↗