journal article·2002-04

Microstructural evolution of a shaped-charge liner and target materials during ballistic tests

Seong Lee, Moon-Hee Hong, Joon-Woong Noh, Woon Hyoung Baek

Publisher page

Abstract

The microstructure of the 1020 mild-steel target, in the region ahead of craters made by colliding against Cu and W-Cu shaped-charge jets, has been investigated in the present work. The region ahead of the crater impacted by the Cu shaped-charge jet reveals grain refinement, implying the formation of subgrains, while that of the W-Cu one leads to a martensitic transformation, indicating that the region was heated to an austenitic region, followed by rapid cooling. The pressure of the W-Cu shaped-charge jet impacting against the target, when calculated, is higher than that of the Cu one. The microhardness of the region ahead of the crater impacted by the W-Cu shaped-charge jet is also higher than that of the Cu one. The microstructure of the W-Cu slug that remains inside of the crater depicts the occurrence of the remarkable elongation of W particles during the liner collapse. The microstructural evolution of the region ahead of the crater is discussed on the basis of the pressure dependency of the ferrite/austenite transformation in the steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. P.Y. Chanteret: Proc. 13th Int. Symp. on Ballistics, Stockholm, 1992, pp. 327–34.
2. W.T. Fu, Z.H. Rong, Z.J. Long, and M.H. Wei: Proc. 13th Int. Symp. on Ballistics, Stockholm, 1992, pp. 387–92.
3. D.H. Lassila: Proc. 14th Int. Symp. on Ballistics, Quebec, PQ, Canada, 1993, pp. 145–53.
4. E.L. Baker, G.P. Voorhis, R. Campbell, and C.S. Choi: Proc. 14th Int. Symp. on Ballistics, Quebec, PQ, Canada, 1993, pp. 137–43.
5. T.F. Wang, H.R. Zhu, W.J. Ruan, and J.L. Zhou: Proc. 15th Int. Symp. on Ballistics, Jerusalem, Israel, 1995, pp. 381–86.
6. F. Jamet and A. Lichtenberger: Proc. 9th Int. Symp. on Ballistics, Orlando, FL, 1986, pp. 233–36.
7. M.-H. Hong, S. Lee, E.-P. Kim, H.-S. Song, J.-W. Noh, and Y.-W. Kim: Proc. 13th Inter. Plansee Seminar, H. Bildstein and R. Eck, eds., Reutte, Austria, 1993, vol. 1, pp. 451–60.
8. I. Bransky, E. Faibish, and S. Miller: Proc. 9th Int. Symp. on Ballistics, Orlando, FL, 1986, pp. 237–42.
9. L. Zernow and L. Lowry: Proc. 12th Int. Symp. on Ballistics, San Antonio, TX, 1990, pp. 410–29.
10. U. Andrade, M.A. Meyers, K.S. Vecchio, and A.H. Chokshi: Acta Metall. Mater., 1994, vol. 42, pp. 3183–95.10.1016/0956-7151(94)90417-0 ↗
11. G.E. Dieter: in Mechanical Metallurgy, M. Bever, M. Shank, C. Wert, and R. Mehl, eds., McGraw-Hill Book Company, New York, NY, 1976, p. 141.
12. L.E. Murr, E. Ferreyra, T.S. Pappu, E.P. Garcia, J.C. Sanchez, Z. Huang, J.M. Rivas, C. Kennedy, A. Ayala, and C.-S. Niou: Mater. Characterization, 1996, vol. 37, pp. 245–76.10.1016/S1044-5803(96)00173-8 ↗
13. P.Y. Chanteret: Proc. 13th Int. Symp. on Ballistics, Stockholm, 1992, pp. 327–34.
14. M. Ahmed, M. Farman, M. Azam, and I. Nasim: Mater. Sci. Technol., 1995, vol. 11, p. 619.10.1179/mst.1995.11.6.619 ↗
15. W. Johnson: Impact Strength of Materials, E. Anold, ed., London, 1972, p. 318.
16. W.P. Walters and R.L. Summers: Proc. 14th Int. Symp. on Ballistics, Quebec, PQ, Canada, 1993, pp. 49–57.
17. K.G. Cowan, P.R. Greenwood, R. Cornish, and B. Bourne: Proc. 17th Int. Symp. on Ballistics, Mid Rand, South Africa, 1998.
18. L. Kaufman: in Solids under Pressure, W. Paul and D.M. Warschauer, eds., McGraw-Hill, Book Company, New York, NY, 1963.
19. L.E. Murr, H.K. Shih, and C.-S. Niou: Mater. Characterization, 1994, vol. 33, pp. 65–74.10.1016/1044-5803(94)90060-4 ↗