journal article·2006-12

The effect of the electromagnetic vabration on the microstructure, segregation, and mechanical properties of As-cast AZ80 magnesium alloy billet

Shijie Guo, Qichi Le, Yi Han, Zhihao Zhao, Jianzhong Cui

Publisher page

Abstract

The effect of the electromagnetic vibration on the properties of 300-mm-diameter AZ80 Mg billets was investigated. The experiments were performed both in the absence and in the presence of electromagnetic vibrating force fields, which were induced by an interaction of variable and stationary magnetic fields. In conventional direct-chill (DC) casting, the AZ80 billet exhibited large dendritic grains with severe segregations of Al and Zn. Applying the electromagnetic vibration during the casting led to significant grain refinement and to greatly reduced segregation in the billet. There was a significant increase in the tensile strength, hardness, and facture elongation of the as-cast AZ80 billet relative to that cast in the absence of the electromagnetic vibration. Microchemical analysis revealed that the application of electromagnetic vibration increased the minimum concentration of Al and Zn in the center of the Mg matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Qian, D.H. StJohn, and M.T. Frost: Scripta Mater., 2002, vol. 46, pp. 649–54.10.1016/S1359-6462(02)00046-5 ↗
2. D. Eliezer, E. Aghion, and F.H. Froes: Proc. 1st Israeli Int. Conf. on Magnesium Science and Technology, Magnesium Research Institute (MIR) Ltd., Beer-Sheva, Israel, 1997, pp. 343–46.
3. L. Bourgeois, B.C. Muddle, and J.F. Nie. Acta Mater., 2001, vol. 49, pp. 2701–11.10.1016/S1359-6454(01)00162-8 ↗
4. M. Mabuchi, Y. Chino, H. Iwasaki, T. Aizawa, and K. Higashi Mater. Trans., 2001, vol. 42, pp. 1182–89.10.2320/matertrans.42.1182 ↗
5. D.G. Eskin, J. Zuidena, Jr., V.I. Savran, and L. Katgerman: Mater. Sci. Eng., A., 2004, vol. 384, pp. 232–44.10.1016/j.msea.2004.05.066 ↗
6. Suyitno, D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A., 2004, Vol. 35, pp. 3551–61.10.1007/s11661-004-0192-7 ↗
7. H. Nagaumi, K. Aoki, K. Komatsu, and N. Hagisawa: Mater. Sci. Forum, 2000, vol. 331, pp. 173–78.10.4028/www.scientific.net/MSF.331-337.173 ↗
8. K. Shinji, T. Toshikazu, H. Zhu, and S. Akikazu: Mater. Trans., 2004, vol. 45, pp. 1706–13.10.2320/matertrans.45.1706 ↗
9. W. Roth: Germany Patent 974.203.
10. W.T. Ennor: U.S. Patent 2.301,027.
11. H. Hao, D.M. Maijer, M.A. Wells, S.L. Cockeroft, D. Sediako, and S. Hibbins: Metall. Mater. Trans. A. 2004, vol. 35, pp. 3843–54.10.1007/s11661-004-0290-6 ↗
12. J.F. Grandfield and A.K. Dahle: TMS Annual Meeting, TMS, Warrendale, PA. 2000, pp. 219–28.10.1002/9781118808962.ch31 ↗
13. Z.N. Getselev: J. Met., 1971, vol. 23, pp. 38–39.
14. T. Campanella, C. Charbon, and M. Rappaz: Metall. Mater. Trans. A. 2004, vol. 35, pp. 3201–10.10.1007/s11661-004-0064-1 ↗
15. B.J. Jung, C.H. Jung, T.K. Han, and Y.H. Kim: J. Mater. Process/ Technol., 2001, vol. 111, pp. 69–73.10.1016/S0924-0136(01)00514-3 ↗
16. Y.S. Yang, Q.M. Liu, Y.N. Jiao, Z.Q. Hu, Y.Y. Gao, L.G. Jia, and J.S. Zhang: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 389–92.10.2355/isijinternational.35.389 ↗
17. C. Vives: Mater. Sci. Eng. A., 1993, vol. 173, pp. 169–72.10.1016/0921-5093(93)90209-W ↗
18. C. Vives: Metall. Mater. Trans. B, 1996, vol. 27, pp. 457–64.10.1007/BF02914910 ↗
19. C. Vives: Metall. Mater. Trans. B, 1996, vol. 27, pp. 445–55.10.1007/BF02914909 ↗
20. P. Bakke, C.D. Fuerst, and H.Westengen: TMS Annual Meeting, TMS. Warrendale, PA, 2000, pp. 201–10.
21. C. Vives: Metall. Mater. Trans. B, 1989, vol. 20, pp. 623–29.10.1007/BF02655919 ↗
22. Y.B. Zuo, J.Z. Cui, Z.H. Zhao, H.T. Zhang, and K. Qin: Mater. Sci. Eng., A, 2005, vol. 406, pp. 286–92.10.1016/j.msea.2005.07.001 ↗
23. R.D. Pehlke: Heat Flow Analyses for Solidification and Cooling State-of-the-Art, TMS-AIME, Warrendale, PA.
24. P.W. Baker and P.T. McGlade: Light Metals, TMS Annual Meeting, TMS, Warrendale, PA, 2001, pp. 855–62.
25. C. Beckermann, Merton Flemings Symp, 2000, H.D. Brody, R. Abbaschian, and A. Mortensen, eds., TMS, Warrendale, PA, pp. 297–310.
26. H. Yu and D.A. Granger: in Aluminum Alloys: Their Physical and Mechanical Properties, EMAS, London, United Kingdom, 1986, pp. 17–29.
27. H.J. Thevik, A. Mo and T. Rusten: Metall. Mater. Trans. B, 1999, vol. 30, pp. 135–42.10.1007/s11663-999-0013-x ↗
28. A.K. Dahle and D.H. Stjohn: Acta Mater., 1999, vol. 47, pp. 31–41.10.1016/S1359-6454(98)00342-5 ↗
29. D.G. Eskin, Suyitno, and L. Katgerman: Progr. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
30. J. Dong, J.Z. Cui, F.X. Yu, C.Y. Ban, and Z.H. Zhao: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2487–94.10.1007/s11661-006-0228-2 ↗
31. X.T. Liu, J.Z. Cui, X.M. Wu, Y.H. Guo, and J. Zhang: Scripta Mater. 2005, vol. 52, pp. 79–82.10.1016/j.scriptamat.2004.05.025 ↗
32. H. Cao and M. Wessen: Metall. Mater. Trans. A, 2004, vol. 35, pp. 309–19.10.1007/s11661-004-0132-6 ↗