Effect of material damage on forming limits of voided anisotropic sheet metals
Source abstract
Abstract
Most failures of ductile materials in metal-forming processes occur due to material damage evolution (void nucleation, growth, and coalescence). The current article examines the modified yield function of Liao et al., in conjunction with Hosford’s yield criterion, to clarify the plastic-deformation characteristic of voided anisotropic sheet metals. As such, the void growth of an anisotropic sheet under biaxial tensile loading and the damage effect of void growth on the forming limits of sheet metals are investigated. Plus, the process length defining the neck geometry is included in the Marciniak and Kuczynski (M-K) model to incorporate the effect of triaxial stress in a necked region on the forming limits. The predicted forming limits were compared with experimental data, and a satisfactory agreement was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Z. Marciniak and K. Kuczynski: Int. J. Mech. Sci., 1967, vol. 9, pp. 609–20.10.1016/0020-7403(67)90066-5 ↗
2. M. Azrin and W.A. Backofen: Metall. Trans., 1970, vol. 1, pp. 2857–65.10.1007/BF03037824 ↗
3. S. Storen and J.R. Rice: J. Mech. Phys. Solids, 1975, vol. 23, pp. 421–41.10.1016/0022-5096(75)90004-6 ↗
4. L. Zhao, R. Sowerby, and M.P. Sklad: Int. J. Mech. Sci., 1996, vol. 38, pp. 1307–17.10.1016/0020-7403(96)00014-8 ↗
5. A. Parmar and P.B. Mellor: Int. J. Mech. Sci., 1980, vol. 22, pp. 133–50.10.1016/0020-7403(80)90063-6 ↗
6. F. Barlat: Mater. Sci. Eng., 1987, vol. 91, pp. 55–72.10.1016/0025-5416(87)90283-7 ↗
7. A. Graf and W.F. Hosford: Metall. Trans. A, 1990, vol. 21A, pp. 87–93.10.1007/BF02656427 ↗
8. J. Cao, H. Yao, A. Karafillis, and M.C. Boyce: Int. J. Plasticity, 2000, vol. 16 (9), pp. 1105–29.10.1016/S0749-6419(99)00091-1 ↗
9. J. Jalinier: Docteur-Ingenieur Thesis, L’institut National Polytechnique de Lorraine, Metz, France, 1978.
10. A. Parmer and P.B. Mellor: Int. J. Mech. Sci., 1978, vol. 20, pp. 385–96.10.1016/0020-7403(78)90041-3 ↗
11. J. Gronostajski and Z. Zimniak: J. Mater. Proc. Technol., 1992, vol. 26, pp. 263–69.10.1016/0924-0136(92)90183-S ↗
12. A.L. Gurson: J. Eng. Mater. Technol. ASME, 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
13. V. Tvergaard: Int. J. Fract., 1981, vol. 17, pp. 389–407.10.1007/BF00036191 ↗
14. E. Doege, A. Bagaviev, and H. Dohrmann: in Advanced Methods in Materials Processing Defects, M. Predeleanu and P. Gilormini, eds., Elsevier Science B.V., Amsterdam, The Netherlands, 1997, pp. 281–88.10.1016/S0922-5382(97)80030-X ↗
15. K.-C. Liao, J. Pan, and S.C. Tang: Mech. Mater., 1997, vol. 26, pp. 213–26.10.1016/S0167-6636(97)00033-1 ↗
16. R. Hill: The Mathematical Theory of Plasticity, Oxford University Press, Oxfords UK, 1949.
17. R. Hill: Math. Proc. Camb. Phil. Soc., 1979, vol. 85, pp. 179–91.10.1017/S0305004100055596 ↗
18. A.R. Ragab and Ch.A.R. Saleh: Int. J. Plasticity, 1999, vol. 15, pp. 1054–65.10.1016/S0749-6419(99)00024-8 ↗
19. R.J. Green: Int. J. Mech. Sci., 1972, vol. 14, pp. 215–24.10.1016/0020-7403(72)90063-X ↗
20. Y.S. Kim, H.S. Son, and S.T. Kim: Plastic and Viscoplastic Response of Materials and Metal Forming, A.S. Khan, H. Zhang, and Y. Yuan, eds., Neat Press, Maryland, USA, 2000, pp. 246–48.
21. W.F. Hosford: Proc. 7th North American Metalworking Conf., SME, Dearborn, MI, 1979, pp. 191–96.
22. A. Needleman and N. Triantafyllidis: J. Eng. Mater. Technol. Trans. ASME, 1978, vol. 100, pp. 164–69.10.1115/1.3443466 ↗
23. D.W. Kim and K.H. Kim: Int. J. Mech. Sci., 1983, vol. 25, pp. 293–301.10.1016/0020-7403(83)90033-4 ↗
24. P.P. Date and K.A. Padmanabhan: Int. J. Mech. Sci., 1992, vol. 34, pp. 363–74.10.1016/0020-7403(92)90024-B ↗
25. A.R. Ragab and C.A.R. Saleh: Mech. Mater., 2000, vol. 32, pp. 71–84.10.1016/S0167-6636(99)00041-1 ↗
26. Y.S. Kim, S.Y. Won, H.S. Son, and D.S. Kim: Int. J. Kor. Soc. Mech. Eng., 2001, vol. 15 (10), pp. 1349–55.
27. A. Needleman and V. Tvergaard: J. Mech. Phys. Solids, 1977, vol. 25, pp. 159–83.10.1016/0022-5096(77)90021-7 ↗
28. Y. Tomita: Numerical Elastic-Plastic Mechanics, Yokendo Ltd., Tokyo, Japan, 1990, pp. 79–81.
29. J. Hu, J.J. Jonas, Y. Zhou, and T. Ishikawa: Mater. Sci. Eng., 1998, vol. A251, pp. 243–50.10.1016/S0921-5093(98)00585-1 ↗
30. K. Narasimhan and R.H. Wagoner: Metall. Trans. A, 1991, vol. 22A, pp. 2655–65.10.1007/BF02851359 ↗
31. P.W. Bridgman: Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York, NY, 1952, pp. 32–36.
32. T. Kuwabara, S. IKeda, and K. Kuroda: J. Mater. Proc. Technol., 1998 vol. 80, pp. 517–23.10.1016/S0924-0136(98)00155-1 ↗
33. Z.J. Luo, W.H. Ji, N.C. Guo, X.Y. Xu, Q.S. Xu, and Y.Y. Zhang: J. Mater. Proc. Technol., 1992, vol. 30, pp. 31–43.10.1016/0924-0136(92)90037-S ↗
34. A.K. Tadros and P.B. Mellor: Int. J. Mech. Sci., 1977, vol. 20, pp. 121–34.10.1016/0020-7403(78)90073-5 ↗
35. Y.S. Kim, S.Y. Won, and A. Needleman: Plasticity, Damage and Fracture at Macro, Micro and Nano Scales, A.S. Khan and O. Lopez-Pamies, eds., Neat Press, Maryland, USA, 2002, pp. 409–01.
36. A. Graf and W. Hosford: Int. J. Mech. Sci., 1994, vol. 36 (10), pp. 897–910.10.1016/0020-7403(94)90053-1 ↗
37. S.A. Majlessi, X.H. Zhu, and E.C. Aifantis: in Sheet Metal Forming Technology, M.Y. Demeri, eds TMS, Warrendale, PA, 1999, pp. 187–203.
38. M.F. Shi and J.C. Gerdeen: J. Mater. Shaping Technol., 1999, vol. 9, pp. 253–68.10.1007/BF02833650 ↗
39. T. Pardoen and J.W. Hutchinson: J. Mech. Phys. Solids, 2000, vol. 48, pp. 2467–512.10.1016/S0022-5096(00)00019-3 ↗
40. A. Needleman: J. Appl. Mech., 1972, vol. 39, pp. 964–70.10.1115/1.3422899 ↗