Influence of intense plastic straining on grain refinement, precipitation, and mechanical properties of Al-Cu-Li-Based alloys
Source abstract
Abstract
Grain refinement is one of the major interests when an ultrahigh strength/ductility combination is demanded for ambient and cryogenic temperature applications, especially when superplastic forming (SPF) is involved for the manufacturing of different aerospace structures. Equal-channel angular extrusion (ECAE) is a relatively new metalworking process, which is capable of producing an ultrafine, submicron-grained (SMG) structure by means of intense plastic straining without a change in the shape or dimensions of the worked material. In the current research work, the influence of ECAE processing on the room-temperature mechanical properties of Al-Cu-Li-Mg-Ag-Zr alloys in the T4 and T6 temper conditions is investigated. An ultrafine SMG structure of 0.2 to 0.4 µm was produced for the ECAE-processed alloys from an initial grain size of >100 µm, which is compared with a conventionally processed superplastic Weldalite sheet material with an ∼1.5 µm grain size. The ECAE processing eliminates the precipitation-free zones (PFZs) in the T6 temper condition without the need for prior stretching. A significant improvement in the mechanical properties at room temperature is achieved by ECAE processing in comparison with conventional processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. W. Moore, M. Zelin, and K. Chaudhury: Superplasticity and Superplastic Forming, A. Ghosh and R. Bieler, eds., TMS, Röskilde, Denmark, 1995, pp. 267–75.
2. A. Cho, M. Greene, P. Fielding, and H. Skillingberg: Al-Li Alloys For Aerospace Application Workshop, 1994, Conf. on Earth Orbit Propulsion Technology, NASA/MSFC, Alabama, May, pp. 17–19.
3. T.H. Sanders: Aluminum-Lithium Alloys II, T. Sanders and E.A. Starke, eds., TMS-AIME, Monterey, CA, 1984, pp. 1–15.
4. E. Lavernia, T. Srivalsav, and F. Mohammed: J. Mater. Sci., 1990, vol. 25, pp. 1137–58.10.1007/BF00585420 ↗
5. A. Csontos and E. Starke, Jr.: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1965–76.10.1007/s11661-000-0224-x ↗
6. K.S. Kumar, S.A. Brown, and J.R. Pickens: Acta Mater., 1996, vol. 44 (5) p. 1899.10.1016/1359-6454(95)00319-3 ↗
7. T.J. Langdon and J.R. Pickens: Aluminum-Lithium Alloys V Conf. Proc., MCE Publications, Ltd., Birmingham, UK, edited by T.H. Sanders, Jr., and E.A. Starke, pp. 691–700.
8. V. Segal: 1st Int. Conf. on Processing Materials for Properties, Honolulu, 1993, H. Henein and T. Oki, eds., 1993, TMS, Warrendale, PA, pp. 947–950.
9. L. Dupuy, J. Blandin, and E. Rauch: Mater. Sci. Technol., 2000, vol. 16, pp. 1256–58.10.1179/026708300101507424 ↗
10. J. Hayes, R. Keyte, and P. Prangnell: Mater. Sci. Technol., 2000, vol. 16, pp. 1259–63.10.1179/026708300101507479 ↗
11. S. Ferrasse, V. Segal, R. Goforth, and T. Hartwig: J. Mater. Res., 1997, 12, No. 5, pp. 1253–61.10.1557/JMR.1997.0173 ↗
12. P.J. Goodhew: Mater. Sci., 1973, p. 153.
13. H.G. Salem: Ph.D. Dissertation, Texas A&M University, College Station, TX, 1997.
14. M. Zaidi and J. Wert: Metals Tech., vol. 11, 1984, pp. 313.10.1179/030716984803274648 ↗
15. F. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, New York, NY, 1996, p. 167.
16. J. Pickens, F. Heubaum, T. Langdon, and L. Kramer: Aluminum-Lithium V, T.H. Sanders and E.A. Starke, Jr., eds. Materials and Component Engineering Publication Ltd., Birmingham, United Kingdom, 1989, pp. 1397–1414.
17. B. Skorlzki, G. Shiflet, and E.A. Starke Jr.: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3431–44.
18. M. Ahmed and T. Ericsson: Scripta Metall., 1985, vol. 19, pp. 457–64.10.1016/0036-9748(85)90113-9 ↗
19. F. Gayle, F. Heubaum, and J. Pickens: Aluminum-Lithium V, T.H. Sanders and E.A. Starke, Jr., eds. Materials and Component Engineering Publication Ltd., Birmingham, United Kingdom, 1989, pp. 701–11.
20. S. Kumar, H.B. McShane, and T. Shepherds: Mater. Sci. Technol., 1994, vol. 10, pp. 162–70.10.1179/mst.1994.10.2.162 ↗
21. J. Huang and A. Ardell: Acta Mater., 1998, vol. 36, pp. 2995–3006.10.1016/0001-6160(88)90182-4 ↗
22. A. Cho, M. Greene, P. Fielding, and H. Skillingberg: Status of Al-Li Program at Reynolds Metal Co., 6th Int. Al-Li Conf., 1991, Oct. 7–11.
23. M.R. Johnsen: Welding Journal, Feb. 1999, pp. 35–38.10.1023/A:1018761807225 ↗
24. H.G. Salem, A. Reynolds, and J. Lyons: Scripta Metall., 2001, vol. 45 (5), pp. 337–42.10.1016/S1359-6462(01)01246-5 ↗