journal article·2005-04

Modeling the ductile-brittle transition behavior in thermomechanically controlled rolled steels

S. J. Wu, C. L. Davis, A. Shterenlikht, I. C. Howard

Publisher page

Abstract

The Charpy impact transition temperature (ITT) is well modeled for hot-rolled or normalized steels having uniform grain size using empirical equations. However, the ITT of nonhomogeneous steel microstructures, such as duplex (mixed fine and coarse) grain sizes, and the scatter in experimental Charpy energy values, observed in the transition region, are not accurately modeled. This article describes research on the microstructure-fracture property relationship and the prediction of the ITT using a cellular automata finite element (CAFE) model in thermomechanically controlled rolled (TMCR) Nb-microalloyed steels. The ferrite grain size distributions for two TMCR steel plates were analyzed and used for the prediction of the local fracture stress (σ F ) values based upon the Griffith model. It was found that the coarse grain size distribution could be used to predict the range of σ F values observed. The CAFE model was used to predict the ITT using the predicted σ F distribution for a TMCR steel. Results showed that the CAFE model realistically predicted the Charpy ITT; in particular, it was able to reproduce the scatter in values in the transition region. Within the model, the percentage of brittle failure and the upper shelf ductile energy were predicted well. However, the lower shelf brittle energy was overestimated due to computational limitations in the commercial FE software used with the current CAFE model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. B. Mintz, G. Peterson, and A. Nassar: Ironmaking and Steelmaking, 1994, vol. 21, pp. 215–22.
2. T. Gladman, D. Dulieu, and I.D. McIvor: Microalloying 75, Union Carbide Corp., New York, NY, 1977, pp. 32–55.
3. B. Mintz, W. B. Morrison, and A. Jones: Met. Technol., 1979, vol. 6, pp. 252–60.10.1179/030716979803276246 ↗
4. W.E. Duckworth and J.D. Baird: J. Iron Steel Inst., 1969, vol. 207, pp. 854–71.
5. E.O. Hall: Proc. Phys. Soc., 1951, B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
6. N.J. Petch: J. Iron Steel Inst., 1953, vol. 173, pp. 25–28.
7. T. Lin, A.G. Evans, and R.O. Ritchie: Metall. Trans. A, 1987, vol. 18A, pp. 641–51.10.1007/BF02649480 ↗
8. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, p. 62.
9. C.L. Davis and M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–90.10.1023/A:1014342800399 ↗
10. M.T. Shehata and J.D. Boyd: in Advances in Physical Metallurgy and Applications of Steels, Proc. Conf., TMS, Warrendale, PA, 1982, pp. 229–36.
11. J.H. Chen, L. Zhu, and H. Ma: Acta Metall. Mater., 1990, vol. 38, pp. 2527–35.10.1016/0956-7151(90)90264-H ↗
12. J.H. Chen, G.Z. Wang, Z. Wang, L. Zhu, and Y.Y. Gao: Metall. Trans. A, 1991, vol. 22A, pp. 2287–96.10.1007/BF02664994 ↗
13. A. From and R. Sandstrom: Mater. Characterization, 1999, vol. 42, pp. 111–22.10.1016/S1044-5803(98)00051-5 ↗
14. S.J. Wu and C.L. Davis: Paper presented at ICSMA13, Budapest, 2003, Mater. Sci. Eng. A, in press.
15. I.C. Howard, Z.H. Li, M.A. Sheikh, A.H. Sherry, D.P.G. Lidbury, and D.W. Beardsmore: IMechE Seminar, ‘20 Years of R6’, IMechE HQ, London, Nov. 20, 1996.
16. M.C. Burstow: Int. J. Pressure Vessels Piping, 2003, vol. 80, pp. 797–805.10.1016/j.ijpvp.2003.01.004 ↗
17. I.C. Howard, Z.H. Li, and M.A. Sheikh: Fatigue and Fracture Mechanics, 30th volume, ASTM STP 1360, P.C. Paris and K.L. Jerina, eds., ASTM, West Conshohocken, PA, 2000, pp. 152–68.10.1520/STP13401S ↗
18. L. Xia and F.S. Shih: J. Mech. Phys. Solids, 1995, vol. 43, pp. 233–59.10.1016/0022-5096(94)00064-C ↗
19. C. Ruggieri and R.H. Dodds: Int. J. Fracture, 1996, vol. 79, pp. 309–40.10.1007/BF00018594 ↗
20. L. Xia and F.S. Shih: J. Mech. Phys. Solids, 1996, vol. 44, pp. 603–39.10.1016/0022-5096(95)00086-0 ↗
21. L. Xia and L. Cheng: Int. J. Fracture, 1997, vol. 87, pp. 289–306.10.1023/A:1007434828898 ↗
22. F.M. Beremin: Metall. Trans. A, 1983, vol. 14A, pp. 2277–87.10.1007/BF02663302 ↗
23. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
24. V. Tvergaard: Int. J. Fracture Mech., 1981, vol. 17, pp. 389–407.10.1007/BF00036191 ↗
25. G. Rousselier, J.C. Devaux, G. Mottel, and G. Devesa: in Nonlinear Fracture Mechanics: Volume II—Elastic Plastic Fracture, J.D. Landes, A. Saxena, and J.G. Merkle, eds., ASTM STP 995, Philadelphia, PA, 1983, pp. 332–54.
26. G. Rousselier: Nucl. Eng. Design, 1987, vol. 105, pp. 97–111.10.1016/0029-5493(87)90234-2 ↗
27. A. Shterenlikht: Ph.D. Thesis, Sheffield University, 2003.
28. J.H. Beynon, S. Das, I.C. Howard, and A. Chterenlikht: in New and Emerging Computational Methods: Applications to Fracture, Damage and Reliability, F.W. Brust, ed., ASME, 2002, pp. 229–37.10.1115/PVP2002-1213 ↗
29. J.H. Beynon, S. Das, I.C. Howard, E.J. Palmiere, and A. Chterenlikht: in ECF14, Fracture Mechanics Beyond 2000, A. Neimitz, I.V. Rokach, D. Kocanda, and K. Golos, eds., EMAS Publications, Sheffield, United Kingdom, 2002, pp. 241–48.
30. A. Shterenlikht and I.C. Howard: Proc. 15th Eur. Conf. of Fracture (ECF15), KTH, Stockholm, 2004.
31. S.J. Wu and C.L. Davis: Paper presented at the 10th EBSD Conf., Swansea, United Kingdom, 2003
32. J. Microsc., 2004, vol. 213, pp. 262-72.
33. S.J. Wu and J.F. Knott: Proc. Conf. on Structural Integrity in the 21st Century, J. Edwards et al., EMAS Publishing, 2000, pp. 247–55.
34. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206.10.1179/mst.1987.3.3.197 ↗
35. A.C. Knessi, G. Posch, C.I. Garcia, and A.J. DeArdo: Proc. Int. Symp. on Low-Carbon Steels for the 90’s, Pittsburgh, PA, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1993, pp. 113–19.
36. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids. 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
37. W.W. Gerberich and E. Kurman: Scripta Metall., 1985, vol. 18, pp. 295–98.10.1016/0036-9748(85)90317-5 ↗
38. O.M.L. Yahya, F. Borit, R. Piques, and A. Pineau: Fatigue Fracture Eng. Mater. Struct., 1998, vol. 21 (12), pp. 1485–1502 DEC.10.1046/j.1460-2695.1998.00126.x ↗
39. P. Hausild, I. Nedbal, C. Berdin, and C. Prioul: Mater. Sci. Eng. A, 2002, vol. 335 (1–2), pp. 164–74.10.1016/S0921-5093(01)01913-X ↗
40. S. Kim, S. Lee, and B.S. Lee: Mater. Sci. Eng. A, 2003, vol. 359 (1–2), pp. 198–209.10.1016/S0921-5093(03)00344-7 ↗
41. M.T. Todinov, M. Novovic, P. Bowen, and J.F. Knott: Mater. Sci. Eng. A, 2000, vol. 287, pp. 116–24.10.1016/S0921-5093(00)00824-8 ↗