Hydrogen effects on the spall strength and fracture characteristics of amorphous Fe-Si-B alloy at very high strain rates
Source abstract
Abstract
A novel approach is suggested, using laser-induced shock wave measurements to estimate the effects of cathodic hydrogen charging on the mechanical properties and fracture characteristics of materials. This approach is applied to (1) determine the dominant mechanism of hydrogen embrittlement (HE) in an amorphous Fe80B11Si9 alloy; and (2) estimate the effects of the high pressures involved in cathodic charging. The dynamic spall strength of an amorphous Fe80B11Si9 alloy shocked before and after hydrogenation by a high-power laser to very high pressures (tens of giga Pascals) is measured. The dynamic spall strength of crystalline iron is measured as well for comparison. An optically recording velocity interferometer system (ORVIS) is used to measure the profile of the free surface velocity in time. The spall strength and the strain rate are calculated from the measurement of the free surface velocity as a function of time. Fracture characteristics are studied by scanning electron microscopy (SEM). The main conclusions are (1) the most reasonable mechanism of HE in the amorphous Fe-Si-B alloy is the high-pressure bubble formation; (2) the high pressures involved in cathodic hydrogen charging or laser-induced shock waves measurements may have similar effects on fracture characteristics; and (3) at very high strain rates, the spall strength is determined mainly by the interatomic bonds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. G.E. Dieter: Mechanical Metallurgy, S.I. Metric, ed., McGraw-Hill Book Co., Singapore, 1988, pp. 496–99.
2. D.E. Grady and M.E. Kipp: in High Pressure Shock Compression of Solids, J.R. Asay and M. Shahinpoor, eds., Springer, New York, NY, 1993, pp. 265–322.10.1007/978-1-4612-0911-9_8 ↗
3. A.V. Bushman, G.I. Kanel, A.L. Ni, and V.E. Fortov: Intense Dynamic Loading of Condensed Matter, Taylor & Francis, Washington, DC, 1993.
4. D.D. Bloomquist and S.A. Sheffield: J. Appl. Phys., 1983, vol. 54 (4), pp. 1717–22.10.1063/1.332222 ↗
5. E. Moshe, E. Dekel, Z. Henis, and S. Eliezer: Appl. Phys. Lett., 1996, vol. 69 (10), pp. 1379–81.10.1063/1.117587 ↗
6. E. Moshe, S. Eliezer, E. Dekel, A. Ludmirsky, Z. Henis, M. Werdiger, I.B. Goldberg, N. Eliaz, and D. Eliezer: J. Appl. Phys., 1998, vol. 83 (8), pp. 4004–11.10.1063/1.367222 ↗
7. A.S. Tetelman and W.D. Robertson: Trans. TMS-AIME, 1962, vol. 224, pp. 775–83.
8. N.J. Petch and P. Stables: Nature, 1952, vol. 169, pp. 842–43.10.1038/169842a0 ↗
9. W.J. Barnett and A.R. Troiano: J. Metall. Trans. AIME, 1957, vol. 209, pp. 486–94.
10. J.K. Tien, A.W. Thompson, I.M. Bernstein, and R.J. Richards: Metall. Trans. A, 1976, vol. 7, pp. 821–29.10.1007/BF02644079 ↗
11. P. Bastien and P. Azou: Proc. World Metallurgy Congr., First American Society of Metals, Cleveland, OH, 1951, pp. 535–52.
12. A.N. Stroh: Adv. Phys., 1957, vol. 6, pp. 418–65.10.1080/00018735700101406 ↗
13. C.D. Beachem: Metall. Trans., 1972, vol. 3, pp. 437–51.10.1007/BF02642048 ↗
14. D.S. Shih, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36 (1), pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
15. D.G. Westlake: Trans. ASM, 1969, vol. 62, pp. 1000–06.
16. H.K. Birnbaum: in Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson, eds., TMS, Warrendale, PA, 1990, pp. 639–60.
17. Glassy Metals I, H.-J. Gütherodt and H. Beck, eds., Springer-Verlag, Berlin, 1981.
18. S.R. Elliott: Physics of Amorphous Materials, 2nd ed., Longman Scientific & Technical, New York, NY, 1990.
19. Amorphous Metallic Alloys, F.E. Luborsky, ed., Butterworth and Co., London, 1983.
20. Rapidly Solidified Alloys, H.H. Liebermann, ed., Marcel Dekker Inc., New York, NY, 1993.
21. H.S. Chen: Rep. Progr. Phys., 1980, vol. 43, pp. 353–432.10.1088/0034-4885/43/4/001 ↗
22. J.-J. Lin and T.-P. Perng: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 197–202.10.1007/BF02669805 ↗
23. J.-J. Lin and T.-P. Perng: J. Mater. Sci. Lett., 1991, vol. 10, pp. 1443–45.10.1007/BF00724401 ↗
24. T.K.G. Namboodhiri, T.A. Ramesh, G. Singh, and S. Sehgal: Mater. Sci. Eng., 1983, vol. 61, pp. 23–29.10.1016/0025-5416(83)90122-2 ↗
25. S. Ashok, N.S. Stoloff, M.E. Glicksman, and T. Slavin: Scr. Metall., 1981, vol. 15, pp. 331–7.10.1016/0036-9748(81)90355-0 ↗
26. A. Kawashima, K. Hashimoto, and T. Masumoto: Scr. Metall., 1980, vol. 14, pp. 41–45.10.1016/0036-9748(80)90121-0 ↗
27. H.W. Schroeder and U. Köster: J. Non-Cryst. Solids, 1983, vol. 56, pp. 213–18.10.1016/0022-3093(83)90470-2 ↗
28. N. Eliaz, D. Eliezer, E. Abramoy, and E.J. Lavernia: Proc. 3rd Pacific Rim Int. Conf. on Advanced Materials and Processing—PRICM3, M.A. Imam, R. DeNale, S. Hanada, Z. Zhong, and D.N. Lee, eds., TMS, Warrendale, PA, 1998, vol. II, pp. 2757–64.
29. N. Eliaz and D. Eliezer: Adv. Perf. Mater., 1999, vol. 6 (1), pp. 5–31.10.1023/A:1008748627295 ↗
30. N. Eliaz: Ph.D. Thesis, Ben-Gurion University of the Negev, Beer-Sheva, Israel, 1999.
31. J.B. Condon and T. Schober: J. Nucl. Mater., 1993, vol. 207, pp. 1–24.10.1016/0022-3115(93)90244-S ↗
32. B. Arad, E. Moshe, S. Eliezer, E. Dekel, A. Ludmirsky, Z. Henis, I.B. Goldberg, N. Eliaz, and D. Eliezer: in Shock Compression of Condensed Matter—1997, S.C. Schmidt, D.P. Dandekar, and J.W. Forbes, eds., American Institute of Physics, New York, NY, 1998, pp. 459–62.
33. E. Moshe, A. Ludmirsky, E. Dekel, Z. Henis, I.B. Goldberg, S. Eliezer, N. Eliaz, and D. Eliezer: in Physics and Mechanics of Finite Plastic and Viscoplastic Deformation, A.S. Khan, ed., NEAT Press, MD, 1997, pp. 127–28.
34. K. Baumung and J. Singer: Physics of Intense Light Ion Beams and Production of High Energy Density in Matter, Forschungzentrum Karlsruhe GmBH, Karlsruhe, 1995, pp. 88–94.
35. L.M. Barker and K.W. Schuler: J. Appl. Phys., 1974, vol. 45 (8), pp. 3692–93.10.1063/1.1663841 ↗
36. Z. Kaczkowski and H.S. Nam: in Magnetic Properties of Amorphous Metals, A. Hernando, V. Madurga, M.C. Sanchez-Trujillo, and M. Vazquez, eds., Elsevier Science, Amsterdam, 1987, p. 139.
37. Technical Bulletin, AlliedSignal, Parsippany, NJ, 1995.
38. L.A. Davis, S.K. Das, J.C.M. Li, and M.S. Zedalis: Int. J. Rapid Solidif., 1994, vol. 8, pp. 73–131.
39. H. Rawson: Properties and Applications of Glass, Elsevier Scientific Publishing Company, Amsterdam, 1980, pp. 98–100.
40. M. Nagumo and T. Takahashi: Mater. Sci. Eng., 1976, vol. 23, pp. 257–59.10.1016/0025-5416(76)90203-2 ↗
41. ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 1118–31.
42. D.E. Grady: J. Mech. Phys. Solids, 1988, vol. 3 (3), pp. 353–84.10.1016/0022-5096(88)90015-4 ↗
43. N. Eliaz, D. Fuks, and D. Eliezer: Acta Mater., 1999, vol. 47 (10), pp. 2981–89.10.1016/S1359-6454(99)00157-3 ↗
44. E. Dekel, S. Eliezer, Z. Henis, E. Moshe, A. Ludmirsky, and I.B. Goldberg: J. Appl. Phys., 1998, vol. 84 (9), pp. 4851–58.10.1063/1.368727 ↗
45. R.M. Latanision, C.R. Compeau, and M. Kurkela: in Hydrogen Embrittlement and Stress Corrosion Cracking, R. Gibala and R.F. Hehemann, eds., ASM, Metals Park, OH, 1984, pp. 297–313.