In-Situ Synchrotron Diffraction Studies on Transformation Strain Development in a High Strength Quenched and Tempered Structural Steel—Part I. Bainitic Transformation
Source abstract
Abstract
In-situ phase transformation behavior of a high strength (830 MPa yield stress) quenched and tempered S690QL1 (Fe-0.16C-0.2Si-0.87Mn-0.33Cr-0.21Mo (wt pct)) structural steel during continuous cooling under different mechanical loading conditions has been studied. Time-temperature-load resolved 2D synchrotron diffraction patterns were recorded and used to calculate the phase fractions and lattice parameters of the phases during heating and cooling cycles under different loading conditions. In addition to the thermal expansion behavior, the effects of the applied stress on the elastic strains during the formation of bainite from austenite and the effect of carbon on the lattice parameter of bainitic ferrite were calculated. The results show that small tensile stresses applied at the transformation temperature do not change the kinetics of the phase transformation. The start temperature for the bainitic transformation decreases upon increasing the applied tensile stress. The elastic strains increase with increase in the applied tensile stress.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. NEN-EN 10025-6, Technical report November, 2004.
2. Blond R, Jimenez-Melero E, Zhao L,Wright JP, Brck E, van der Zwaag S, van Dijk NH (2012) Acta Materialia 60(2):565–57710.1016/j.actamat.2011.10.019 ↗
3. Blond R, Jimenez-Melero E, van Dijk NH, Brck E, Zhao L, Sietsma J, van der Zwaag S (2011) Diffusion and Defect Data PtB: Solid State Phenomena 172(174):196–201
4. Offerman SE, van Dijk NH, Sietsma J, Lauridsen EM, Margulies L, Grigull S, Poulsen HF, van der Zwaag S (2006) Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 246(1):194–20010.1016/j.nimb.2005.12.058 ↗
5. Offerman SE, van Dijk NH, Sietsma J, Grigull S, Lauridsen EM, Margulies L, Poulsen HF, Rekveldt MT, van der Zwaag S (2002) Science 298(5595):1003–100510.1126/science.1076681 ↗
6. Dai H, Francis JA, Stone HJ, Bhadeshia HKDH, Withers PJ (2008) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 39(13):3070–307810.1007/s11661-008-9616-0 ↗
7. Stone HJ, Bhadeshia HKDH, Withers PJ (2008) Materials Science Forum 571(572):393–39810.4028/www.scientific.net/MSF.571-572.393 ↗
8. Taleb L, Cavallo N, Waeckel F (2001) International Journal of Plasticity 17:1–2010.1016/S0749-6419(99)00090-X ↗
9. Bhadeshia HKDH (2004) Materials Science and Engineering A 378(1-2 SPEC ISS.):34–3910.1016/j.msea.2003.10.328 ↗
10. Withers PJ, Bhadeshia HKDH (2001). Materials Science and Technology 17(4):366–37510.1179/026708301101510087 ↗
11. Dutta RK, Amirthalingam M, Hermans MJM, Richardson IM (2013) Materials Science and Engineering A 559:86–9510.1016/j.msea.2012.08.034 ↗
12. Dutta RK, Huizenga RM, Amirthalingam M, Hermans MJM, King A, Richardson IM (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44(9):4011–401410.1007/s11661-013-1829-1 ↗
13. J.C. Labiche, O. Mathon, S. Pascarelli, M.A. Newton, G.G. Ferre, C. Curfs, G. Vaughan, A. Homs, and D.F. Carreiras: Rev. Sci. Instrum., 2007, vol. 78 (9), p. 091301.10.1063/1.2783112 ↗
14. Hammersley AP, Svensson SO, Hanfland M, Fitch AN, Husermann D (1996) High Pressure Research 14(4-5):235–24810.1080/08957959608201408 ↗
15. van Dijk NH, Butt AM, Zhao L, Sietsma J, Offerman SE, Wright JP, van der Zwaag S (2005) Acta Materialia 53(20):5439–544710.1016/j.actamat.2005.08.017 ↗
16. van Bohemen SMC, Sietsma J (2008) International Journal of Materials Research 99(7):739–74710.3139/146.101695 ↗
17. van Bohemen SMC (2010) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 41(2):285–29610.1007/s11661-009-0106-9 ↗
18. Pati SR, Cohen M (1969) . Acta. Metall.. Mater.. 17(3):189–19910.1016/0001-6160(69)90058-3 ↗
19. van Bohemen SMC, Sietsma J (2010) Materials Science and Engineering A 527(24-25):6672–667610.1016/j.msea.2010.06.091 ↗
20. Chester NA, Bhadeshia HKDH (1997) J Phys IV 7:41–46
21. van Bohemen SMC, Sietsma J (2009) Materials Science and Technology 25(8):1009–101210.1179/174328408X365838 ↗
22. Bhadeshia HKDH (1981) Metal Science 15(4):175–17710.1179/030634581790426714 ↗
23. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., The Institute of Materials, London, 2001.
24. Koistinen DP, Marburger RE (1959) Acta Metallurgica 7(1):59–6010.1016/0001-6160(59)90170-1 ↗
25. Babu SS, Specht ED, David SA, Karapetrova E, Zschack P, Peet M, Bhadeshia HKDH (2005) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 36(12):3281–328910.1007/s11661-005-0002-x ↗
26. Dyson DJ, Holmes B (1970) J Iron Steel Inst (London) 208(pt 5):469–74
27. Bhadeshia HKDH, David SA, Vitek JM, Reed RW (1991) Materials Science and Technology 7(8):686–69810.1179/026708391790184915 ↗
28. M. Amirthalingam, M.J.M. Hermans, R.M. Huizenga, S.E. Offerman, J. Sietsma, and I.M. Richardson: in In-Situ Studies with Photons, Neutrons and Electrons Scattering, T. Kannengiesser, S.S. Babu, Y. Komizo, A.J. Ramirez, eds., Springer, Berlin. ISBN 978-3-642-14793-7, 2010, pp. 133–4810.1007/978-3-642-14794-4_9 ↗
29. Amirthalingam M, Hermans MJM, Zhao L, Richardson IM (2010) Metallurgical and Materials Transactions A 41:431–43910.1007/s11661-009-0117-6 ↗
30. Barabash OM, Babu SS, David SA, Vitek JM, Barabash RI (2003) Journal of Applied Physics 94(1):738–74210.1063/1.1579863 ↗
31. de Cooman BC (2004) Current Opinion in Solid State and Materials Science 8(34):285–30310.1016/j.cossms.2004.10.002 ↗
32. Wang J, van der Zwaag S (2001) Metallurgical and Materials Transactions A 32:1527–153910.1007/s11661-001-0240-5 ↗
33. Rees GI, Bhadeshia HKDH (1992) . Materials Science and Technology 8(11):985–99310.1179/026708392790409842 ↗
34. N. Luzginova: Ph.D. Thesis, Delft University of Technology, 2008.
35. Coret M, Calloch S, Combescure A (2002) International Journal of Plasticity 18:1707–172710.1016/S0749-6419(01)00067-5 ↗
36. Gautier E, Denis S, Liebaut C, Sjostrom S (1994) Journal De Physique IV : JP 4(3):279–284