Formability of Ultrafine-Grain Mg Alloy AZ31B at Warm Temperatures
Source abstract
Abstract
Warm formability of ultrafine-grain (UFG) AZ31B Mg alloy in the range of 150 °C to 311 °C is investigated. Refinement of grain size significantly improves the formability primarily through increasing strain rate sensitivity of flow stress and increasing diffuse quasi-stable flow, as compared with the coarse-grain AZ31B alloy. Strain rate sensitivity increases with increasing temperatures, and seems to be connected with dynamic recovery and grain boundary processes. For fine-grain sizes, twinning is inhibited. At 200 °C and strain rates below 2 × 10−4 s−1, the UFG AZ31B alloy demonstrates a high rate of strain hardening up to a true strain of 0.6, in addition to its high strain rate sensitivity, which is responsible for its enhanced formability. Examination of the microstructure shows that there is competition between dynamic grain growth and grain refinement during deformation at modest warm forming temperatures, the former causing hardening and the latter causing softening. Increasing the test strain rate and starting with larger grain size initiates deformation twinning during forming, and assists in the refinement of the coarser grains followed by recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. K.U. Kainer and F. von Buch: in Magnesium Alloys and Technologies, K.U. Kainer, ed., DGM, Wiley-VCH, New York, NY, 2003, p. 110.1002/3527602046 ↗
2. P.G. Patridge: Met. Rev., 1967, vol 118, p. 16910.1179/imr.1967.12.1.169 ↗
3. S.E. Ion, F.J. Humphreys, S.H. White: Acta Metall., 1982, vol. 30, p. 1909.10.1016/0001-6160(82)90031-1 ↗
4. A. Galiyev, R. Kaibyshev, G. Gottstein: Acta Metall., 2001, vol. 49, p. 1199.
5. T. Mohri, M. Mabuchi, M. Nakamura, T. Asahina, H. Iwasaki, T. Aizawa, K. Higashi: Mater. Sci. Eng. A, 2000, vol. 290, p. 13910.1016/S0921-5093(00)00959-X ↗
6. J.C. Tan, M.J. Tan: Mater. Sci. Eng. A, 2003, vol. 339, p. 8110.1016/S0921-5093(02)00097-7 ↗
7. O.A. Kaibyshev: Superplasticity of Alloys, Intermetallides, and Ceramics, Springer-Verlag, Berlin, 1992, vol. 148, p. 17510.1007/978-3-642-84673-1_7 ↗
8. K. Kubota, M. Mabuchi, K. Higashi: J. Mater. Sci., 1999, vol. 34, p. 225510.1023/A:1004561205627 ↗
9. M. Mabuchi, T. Asahina, H. Iwasaki, K. Higashi: Mater. Sci. Technol., 1997, vol. 13, p. 82510.1179/mst.1997.13.10.825 ↗
10. R. Mishra, S.X. McFadden, and A.K. Mukherjee: in Investigations and Applications of Severe Plastic Deformation, T.C. Lowe and R.Z. Valiev, eds., Kluwer Academic Publishers, The Netherlands, 2000, p. 23110.1007/978-94-011-4062-1_30 ↗
11. S. Kumura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, T.G. Langdon: Scripta Mater., 1998, vol. 38, p. 185110.1016/S1359-6462(98)00099-2 ↗
12. A.V. Sergueeva, V.V. Stolyarov, R.Z. Valiev, A.K. Mukherjee: Mater. Sci. Eng. A, 2002, vol. 323, p. 31810.1016/S0921-5093(01)01384-3 ↗
13. S.X. McFadden, A.P. Zhilyaev, R.S. Mishra, A.K. Mukherjee: Mater. Lett., 2000, vol. 45, p. 34510.1016/S0167-577X(00)00131-2 ↗
14. K. Matsubara, Y. Miyahara, Z. Horita, T.G. Langdon: Acta Mater., 2003, vol. 51, p. 307310.1016/S1359-6454(03)00118-6 ↗
15. Y. Liu, A.K. Ghosh: in Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, B.R. Powell, eds., TMS, Warrendale, PA, 2005, p. 139.
16. Q. Yang and A.K. Ghosh: Acta. Mater., 2006, vol. 54, pp. 5147–58; see also Q. Yang: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 2005
17. Q. Yang and A.K. Ghosh: Acta. Mater., 2006, vol. 54, pp. 5159–70; see also Q. Yang: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 2005
18. P.A. Friedman, A.K. Ghosh: Metall. Mater. Trans. A, 1996, vol. 27A, p. 303010.1007/BF02663852 ↗
19. A.K. Ghosh, C.H. Hamilton: Metall. Trans. A, 1979, vol. 10A, p. 699.10.1007/BF02658391 ↗
20. W.F. Hosford, R.M. Caddell: Metal Forming: Mechanics and Metallurgy, 2nd ed., PTR Prentice Hall, Englewood Cliffs, NJ, 1993, p. 271.
21. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill Inc., New York, NY, 1990, p. 277
22. W.F. Hosford: Mechanical Behavior of Materials, Cambridge University Press, Cambridge, United Kingdom, 2005, p. 11110.1017/CBO9780511810930 ↗
23. ASM Specialty Handbook, M.M. Avedesian and H. Baker, eds., ASM INTERNATIONAL, Materials Park, OH, 1999, p. 10
24. H.J. Frost, M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982
25. M.A. Clark, T.H. Alden: Acta Metall., 1973, vol. 21, p. 119510.1016/0001-6160(73)90160-0 ↗
26. D.S. Wilkinson, C.H. Caceres: Acta Metall., 1984, vol. 34, p. 133510.1016/0001-6160(84)90079-8 ↗
27. F. Li, D.H. Bae, A.K. Ghosh: Acta Mater., 1997, vol. 45, p. 388710.1016/S1359-6454(97)00032-3 ↗
28. M.G. Zelin: Acta Mater., 1997, vol. 45, p. 353310.1016/S1359-6454(97)00065-7 ↗
29. A.K. Ghosh: Acta Metall., 1977, vol. 25, p. 141310.1016/0001-6160(77)90072-4 ↗
30. E.W. Hart: Acta Metall., 1967, vol. 15, p. 35110.1016/0001-6160(67)90211-8 ↗
31. U.F. Kocks, J.J. Jonas, H. Mecking: Acta Metall., 1979, vol. 27, p. 41910.1016/0001-6160(79)90034-8 ↗
32. A.K. Ghosh: Acta Metall., 1980, vol. 28, p. 144310.1016/0001-6160(80)90046-2 ↗
33. R.C. Gifkins: Metall. Trans. A, 1976, vol. 7A, p. 122510.1007/BF02656607 ↗
34. A.K. Ghosh: Mater. Sci. Forum, 1994, vols. 170–172, p. 3910.4028/www.scientific.net/MSF.170-172.39 ↗
35. M.F. Ashby: Surf. Sci., 1972, vol. 31, p. 498.10.1016/0039-6028(72)90273-7 ↗
36. S.R. Agnew: Magnesium Technology 2002, H.I. Kaplan, eds., TMS, Warrendale, PA, 2002, p. 169.
37. O. Duygulu, S.R. Agnew, Magnesium Technology 2003, H.I. Kaplan, ed., TMS, Warrendale, PA, 2003, p. 237.
38. M.M. Myshlyaev, H.J. McQueen, A. Mwembela, E. Konopleva: Mater. Sci. Eng. A, 2002, vol. 337, p. 12110.1016/S0921-5093(02)00007-2 ↗
39. M.A. Meyers, O. Vohringer, V.A. Lubarda: Acta Mater., 2001, vol. 49, p. 402510.1016/S1359-6454(01)00300-7 ↗
40. F.J. Humphreys: Acta Mater., 1997, vol. 45, p. 423110.1016/S1359-6454(97)00070-0 ↗
41. A. Oscarsson, H.-E. Ekstrom, B. Hutchinson: in Recrystallization ‘92, M. Fuentes, J. Gil Sevillano, eds., Trans Tech Publications, Aedermannsdorf, Switzerland, 1992, p. 177
42. H. Hu: Electron Microscopy and Strength of Crystals, Interscience Publishers, New York, NY, 1963
43. P. Cotterill, P.R. Mould: Recrystallization and Grain Growth in Metals, John Wiley & Sons, New York, NY, 1976
44. Binary Alloy Phase Diagrams, T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 2444