A New Oxide Morphology Map: Initial Oxidation Behavior of Ni-Base Single-Crystal Superalloys
Source abstract
Abstract
Predictions for oxidation behavior of Ni-base superalloys become more difficult than before because of the complex alloy composition. In this study, we focus on the initial oxidation behavior of Ni-base superalloys, and we suggest a new diagram to predict the initial oxide morphology of Ni-base superalloys with 63 binary, ternary, and multicomponent Ni-base single-crystal superalloys at 1373 K (1100 °C). As a comparison of observed and calculated weight changes after one cycle at 1373 K (1100 °C) obtained by a regression analysis, 63 alloys demonstrated two distinct behaviors, which are divided heretofore into group A and group B. Microstructural observation revealed that an oxide layer in the group A alloys consists of Al2O3 and/or spinel or complex oxide, whereas an oxide layer in the group B alloys consists of a thick NiO layer with an Al2O3 internal subscale. Thermodynamic properties can reflect more effects of alloy elements in Ni-base superalloys, and Al and Cr activities, calculated by Thermo-Calc, were used as factors to predict initial oxidation morphology. Groups A and B alloys can clearly be divided according to Al and Cr activities. This was suggested as a new diagram to predict the initial oxide morphology of Ni-base superalloys, and possibly it can apply for any generation of Ni-base superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. K. Kawagishi, H. Harada, A. Sato, A. Sato, and T. Kobayashi: JOM, 2006, pp. 43–46.10.1007/s11837-006-0067-z ↗
2. K. Kawagishi, A. Sato, H. Harada, A.C. Yeh, Y. Koizumi, and T. Kobayashi: Mater. Sci. Technol., 2009, vol. 25, no. 2, pp. 271-75.10.1179/174328408X361517 ↗
3. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, no. 11, pp. 1782-90.10.1149/1.2407837 ↗
4. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, 2nd ed., Wiley, New York, NY, 1987, pp. 293-326.
5. G.R. Wallwork and A.Z. Hed: Oxi. Met., 1971, vol. 3, no. 2, pp. 171-84.10.1007/BF00603485 ↗
6. C.A. Barrett and C.E. Lowell: Oxi. Met., 1977, vol. 11, no. 4, pp. 199-223.10.1007/BF00606544 ↗
7. H. Hindam and D.P. Whittle: Oxi. Met., 1982, vol. 18, nos. 5-6, pp. 245-84.10.1007/BF00656571 ↗
8. J.L. Smialek, J.A. Nesbitt, C.A. Barrett, and C.E. Lowell: NASA Report, No. 209768, NASA, Washington, DC, 2000.
9. B.A. Pint, P.F. Tortorelli, and I.G. Wright: Oxi. Met., 2002, vol. 58, nos. 1, 2, pp. 73-101.10.1023/A:1016064524521 ↗
10. C. Wagner: J. Electrochem. Soc., 1952, vol. 99, pp. 369-80.10.1149/1.2779605 ↗
11. T.J. Nijdam and W.G. Sloof: Acta Mater., 2008, vol. 56, pp. 4972-83.10.1016/j.actamat.2008.06.010 ↗
12. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2003, vol. 51, pp. 5295-5307.10.1016/S1359-6454(03)00381-1 ↗
13. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2005, vol. 53, pp. 1643-53.10.1016/j.actamat.2004.12.014 ↗
14. G. Wahl: Thin Solid Films, 1983, vol. 107, pp. 417-26.10.1016/0040-6090(83)90303-6 ↗
15. A. Sato, Y.-L. Chiu, and R.C. Reed: Acta Mater., 2011, vol. 59, pp. 225-40.10.1016/j.actamat.2010.09.027 ↗
16. H. Harada, K. Ohno, T. Yamagata, T. Yokokawa, and M. Yamazaki: Superalloys 1988, TMS, Champion, PA, 1988, pp. 733-42.
17. S. Walston, A. Cetal, R. Mackay, K. O’Hara, D. Duhl, and R. Dreshfield: Superalloys 2004, TMS, Champion, PA, 2004, pp. 15-24.
18. M. Osawa and H. Harada: Proc. of High Temperature Materials 2001, NIMS, Tsukuba, Japan, 2001, pp. 14–15.
19. T. Yokokawa, M. Osawa, K. Tanaka, T. Kobayashi, and H. Harada: Proc. of 2000 JIM Spring meeting, Yokohama, Japan, 2000, p. 295.10.5346/trbane.2000.41 ↗
20. A. Sato, H. Harada, A.C. Yeh, K. Kawagishi, Y. Koizumi, T. Yokokawa, and J.X. Zhang: Superalloys 2008, TMS, Champion, PA, 2008, pp. 131-38.
21. Thermo-Calc Software: Thermo-Calc, http://www.thermocalc.se/.
22. A.S. Suzuki, K. Kawagishi, T. Yokokawa, H. Harada, and T. Kobayashi: Scripta Mater., 2011, vol. 65, pp. 49-52.10.1016/j.scriptamat.2011.03.007 ↗
23. K. Pruessner and H. Harada: J. Electrochem. Soc., 2010, vol. 57, no. 11, pp. 95-98.10.1149/1.3482074 ↗
24. A. Akhtar, M.S. Hook, and R.C. Reed: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3001-17.10.1007/s11661-005-0073-8 ↗
25. K. Kawagishi, A. Sato, A. Sato, T. Kobayashi, and H. Harada: Mater. Sci. Forum., 2006, vols. 522–523, pp. 317-22.10.4028/www.scientific.net/MSF.522-523.317 ↗
26. K. Kawagishi, A. Sato, T. Kobayashi, and H. Harada: J. Jpn. Inst. Met., 2007, vol. 71, no. 3, pp. 313-19.10.2320/jinstmet.71.313 ↗
27. R. Hashizume, A. Yoshinari, T. Kiyono, Y. Murata, and M. Morinaga: Superalloys 2004, TMS, Champion, PA, 2004, pp. 53-62.
28. T. Yokokawa, M. Osawa, K. Nishida, T. Kobayashi, Y. Koizumi, and H. Harada: Scripta Mater., 2003, vol. 49, pp. 1041-46.10.1016/S1359-6462(03)00437-8 ↗
29. F.H. Stott, G.C. Wood, D.P. Whittle, B.D. Bastow, Y. Shida, and A. Martinez-Villafane: Solid State Ion., 1984, vol. 12, pp. 365-74.10.1016/0167-2738(84)90166-8 ↗
30. F.H. Stott, Y. Shida, D.P. Whittle, G.C. Wood, and B.D. Bastow: Oxi. Met., 1982, vol. 18, pp. 127-46.10.1007/BF00662034 ↗
31. F.H. Stott, G.C. Wood, Y. Shida, D.P. Whittle, and B.D. Bastow: Corrosion Sci., 1981, vol. 21, pp. 599-624.10.1016/0010-938X(81)90011-1 ↗
32. N. Birks and G.H. Meier: Introduction to High Temperature Oxidation of Metals, 1st ed., Edward Arnold, London, UK, 1983, pp. 91-130.
33. L.S. Darken: Trans. AIME, 1948, vol. 175, pp. 184-201.
34. G.S. Hartley and J. Crank: Trans. Faraday Soc., 1949, vol. 45, no. 9, pp. 801-18.10.1039/tf9494500801 ↗
35. I.M. Edmonds, H.E. Evans, C.N. Jones, and B.W. Broomfield: Oxi. Met., 2008, vol. 69, nos. 1-2, pp. 95-108.10.1007/s11085-007-9085-7 ↗
36. K. Kawagishi, A. Sato, T. Kobayashi, and H. Harada: J. Jpn. Inst. Met., 2006, vol. 70, no. 8, pp. 686-89.10.2320/jinstmet.70.686 ↗
37. I.M. Edmonds, H.E. Evance, C.N. Jones, and R.W. Broomfield: Mater. Sci. Forum., 2008, vols. 595-8, pp. 59-67.10.4028/www.scientific.net/MSF.595-598.59 ↗
38. R.A. Hobbs, L. Zhang, C.M.F. Rae, and S. Tin: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1014-25.10.1007/s11661-008-9490-9 ↗
39. A.C. Yeh, C.M.F. Rae, and S. Tin: Superalloys 2004, TMS, Warrendale, PA, 2004, pp. 677-86.
40. S. Bose: High Temperature Coatings, Butterworth-Heinemann, Burlington, MA, 2007, pp. 29-52.10.1016/B978-075068252-7/50005-6 ↗