The role of impurities during creep and superplasticity at very low stresses
Source abstract
Abstract
It is well documented that impurities play an important role in the deformation and fracture of polycrystalline materials. For example, the results of a number of studies have demonstrated that the presence of a very small of amount of impurities in polycrystalline materials can explain many phenomena such as temper embrittlement in steels, creep embrittlement, and enhancement of ductility in the intermetallic compound Ni3Al. This article reviews the details of two high-temperature deformation phenomena whose characteristics are, according to very recent experimental evidence, influenced or controlled by impurities. The first phenomenon, micrograin superplasticity, deals with the ability of fine-grained materials (d<10 µm, where d is the grain size) to exhibit extensive neck-free elongations during deformation at elevated temperatures above 0.5 Tm, where Tm is the melting point. The second phenomenon, Harper-Dom creep, refers to the anomalous creep behavior of large-grained materials at very low stresses and temperatures near the melting point. It is shown that while these two phenomena are different in terms of the conditions of occurrence and the characteristics of deformation, they share three common features: (1) stresses applied to produce deformation are very small; (2) impurities control the deformation characteristics such as the shape of the creep curve, the value of the stress exponent, and the details of the substructure; and (3) boundaries play a key role during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. H. Gleiter and B. Chalmers: Progr. Mater. Sci., 1972, vol. 16.
2. H.C. Chang and N.J. Grant: Trans: Trans. AIME., 1956, vol. 206, pp. 544–51.
3. H. Riedel: in Fracture at High Temperatures, B. Ilschner and N. Grant, eds., MRE Springer-Verlag, New York, NY 1986, pp. 116–47.
4. F.R.N. Nabarro: Report on a Conference on Strength of Solids, Physical Society, London, 1948, p. 75.
5. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
6. R.L. Coble: J. Appl. Phys., 1964, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
7. C.J. McMahon: ASTM STP, 1968, vol. 407, pp. 127–67.
8. D.P. Pope and D.S. Wilkinson: in Recent Advances in Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, 1981, pp. 351–544.
9. C.T. Liu, C.L. White, C.C. Koch, and E.H. Lee: in High Temperature Materials Chemistry—II, Z.A. Munir and D. Cubicciotti, eds., The Electrochemical Society, Pennington, NJ, 1983, pp. 32–41.
10. T. Taylor and R.L. Edgar: Metall. Trans., 1971, vol. 2, pp. 883–39.10.1007/BF02662750 ↗
11. A.K. Mukherjee: Ann. Rev. Mater. Sci., 1979, vol. 9, pp. 191–217.10.1146/annurev.ms.09.080179.001203 ↗
12. R.C. Gifkins: in Superplastic Forming of Structural Alloys, N.E. Paton and C.H. Hamilton, eds., TMS-AIME, San Diego, CA, 1982, pp. 2–26.
13. O.D. Sherby and J. Wadsworth: Progr. Mater. Sci., 1989, vol. 33, pp. 169–221.10.1016/0079-6425(89)90004-2 ↗
14. H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. Rep., 1993, vol. R10, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
15. J. Harper and J.E. Dorn: Acta Metall., 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
16. J. Harper, L.A. Shepard, and J.E. Dorn: Acta Metall., 1958, vol. 6, pp. 509–18.10.1016/0001-6160(58)90114-7 ↗
17. W.A. Backofen, I.R. Turner, and D.H. Avery: Trans. ASM, 1964, vol. 57, pp. 980–16.
18. T.H. Alden: Acta Metall., 1967, vol. 15, pp. 469–79.10.1016/0001-6160(67)90078-8 ↗
19. W.B. Morrison: Trans. ASM, 1968, vol. 61, pp. 423–34.
20. J. Hedworth and M.J. Stowell: J. Mater. Sci., 1971, vol. 6, pp. 1061–69.10.1007/BF00980604 ↗
21. G.B. Gibbs: Phil. Mag., 1966, vol. 13, pp. 317–29.10.1080/14786436608212610 ↗
22. A. Arieli and A. Rosen: Scripta Metall., 1976, vol. 10, pp. 471–75.10.1016/0036-9748(76)90175-7 ↗
23. E.W. Hart: Acta Metall., 1970, vol. 18, pp. 599–610.10.1016/0001-6160(70)90089-1 ↗
24. P.K. Chaudhury and F.A. Mohamed: Acta Metall., 1988, vol. 36, pp. 1099–1110.10.1016/0001-6160(88)90163-0 ↗
25. F.A. Mohamed and T.G. Langdon: J. Mater. Sci., 1982, vol. 17, pp. 1925–29.10.1007/BF00540408 ↗
26. H.I. Huang, D. Sherby, and J.E. Dorn: Trans. TMS-AIME, 1956, vol. 206, pp. 1385–88.
27. P. Chaudhari: Acta Metall., 1967, vol. 15, pp. 1777–86.10.1016/0001-6160(67)90041-7 ↗
28. F.A. Mohamed and T.G. Langdon, Phys. Status Solidi (a), 1976, vol. 33, pp. 375–81.10.1002/pssa.2210330140 ↗
29. D. Lee: Acta Metall., 1969, vol. 17, pp. 1057–69.10.1016/0001-6160(69)90051-0 ↗
30. O.A. Kaibyshev, R.Z. Valeiv, and V.V. Astamin: Phys. Status. Solidi, 1976, vol. 35, pp. 403–13.10.1002/pssa.2210350144 ↗
31. I.I. Novikov, V.K. Portnoy, and T.E. Terentieva: Acta Metall., 1977, vol. 25, pp. 1139–49.10.1016/0001-6160(77)90201-2 ↗
32. N. Furushiro and S. Hori: Scripta Metall., 1979, vol. 13, pp. 653–56.10.1016/0036-9748(79)90129-7 ↗
33. R.B. Vastava and T.G. Langdon: Acta Metall., 1979, vol. 27, pp. 251–57.10.1016/0001-6160(79)90103-2 ↗
34. Z.-R. Lin, A.H. Chokshi, and T.G. Langdon: J. Mater. Sci., 1988, vol. 23, pp. 2712–22.10.1007/BF00547441 ↗
35. P. Shariat, R.B. Vastava, and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 285–96.10.1016/0001-6160(82)90068-2 ↗
36. R.C. Gifkins: Metal Forum, 1991, vol. 15, pp. 82–94.
37. K.T. Park, S. Yan, and F.A. Mohamed: Phil. Mag., 1995, vol. 72A, pp. 891–903.10.1080/01418619508239942 ↗
38. K. Duong and F.A. Mohamed: Acta Mater., 1998, vol. 46, pp. 4571–86.10.1016/S1359-6454(98)00128-1 ↗
39. K. Duong and F.A. Mohamed: Phil. Mag., 1999, vol. 80A, pp. 2721–35.
40. K. Duong and F.A. Mohamed: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 103–13.10.1007/s11661-001-0106-x ↗
41. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative Relation between Properties and Microstructure, D.G. Brandon and A. Rosen, eds., Israel University Press, Jerusalem, 1969, pp. 255–342.
42. F.A. Mohamed and T.G. Langdon: Acta. Metall., 1975, vol. 23, pp. 117–24.10.1016/0001-6160(75)90076-0 ↗
43. F.A. Mohamed, S.A. Shei, and T.G. Langdon: Acta. Metall., 1975, vol. 23, pp. 1443–50.10.1016/0001-6160(75)90153-4 ↗
44. F.A. Mohamed and T.G. Langdon: Phil. Mag., 1975, vol. 32, pp. 697–709.10.1080/14786437508221614 ↗
45. S.H. Vale, D.J. Eastgate, and P.M. Hazzledine: Scripta Metall., 1979, vol. 13, pp. 1157–62.10.1016/0036-9748(79)90274-6 ↗
46. D.W. Livesey and N. Ridley: Scripta Metall., 1982, vol. 16, pp. 165–68.10.1016/0036-9748(82)90378-7 ↗
47. S.A. Shei and T.G. Langdon: Acta Metall., 1978, vol. 26, pp. 638–46.
48. A.H. Chokshi and T.G. Langdon: Metall. Trans. A, 1988, vol. 19A, pp. 2487–96.10.1007/BF02645476 ↗
49. F.A. Mohamed and T.J. Ginter: J. Mater. Sci., 1982, vol. 17, pp. 2007–12.10.1007/BF00540418 ↗
50. F.A. Mohamed and T.G. Langdon: Scripta Met., 1976, vol. 10, pp. 759–62.10.1016/0036-9748(76)90358-6 ↗
51. M.S. Soliman, T.J. Ginter, and F.A. Mohamed: Phil. Mag., 1993, vol. A48, p. 63.
52. B.P. Kashyap, A. Arieli, and A.K. Mukherjee: J. Mater. Sci., 1985, vol. 28, pp. 2661–86.10.1007/BF00553028 ↗
53. A. Vevecka and T.G. Langdon: Mater. Sci., 1994, vol. A187, pp. 161–65.
54. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
55. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–7.10.1016/0036-9748(69)90167-7 ↗
56. A.K. Mukherjee: Mater. Sci. Eng., 1971, vol. 8, pp. 83–89.10.1016/0025-5416(71)90085-1 ↗
57. R.C. Gifkins: Metall. Trans. A, 1976, vol. 7A, pp. 1225–32.10.1007/BF02656607 ↗
58. J.H. Gittus: Trans. ASME, H. J. Eng. Mater. Technol., 1977, vol. 99, pp. 244–51.10.1115/1.3443527 ↗
59. A. Arieli and A.K. Mukherjee: Mater. Sci. Eng., 1980, vol. 45, pp. 61–70.10.1016/0025-5416(80)90070-1 ↗
60. V. Paidar and S. Takeuchi: Acta. Metall. Mater., 1992, vol. 40, pp. 1773–82.10.1016/0956-7151(92)90120-4 ↗
61. P.K. Chaudhury, K.T. Park, and F.A. Mohamed: Metall. Mater. Trans. A, 1994, vol. A25, pp. 2391–2401.10.1007/BF02648859 ↗
62. S. Yan, J.C. Earthman, and F.A. Mohamed: Phil. Mag. A, 1994, vol. 69, pp. 1017–38.10.1080/01418619408242236 ↗
63. R.Z. Valiev and O.A. Kaibyshev: Acta Metall., 1983, vol. 31, pp. 2121–28.10.1016/0001-6160(83)90031-7 ↗
64. R.Z. Valiev and T.G. Langdon: Acta Metall. Mater., 1993, vol. 41, pp. 949–54.10.1016/0956-7151(93)90029-R ↗
65. T.G. Langdon: Mater. Sci. Eng., 1994, vol. A174, pp. 225–30.10.1016/0921-5093(94)91092-8 ↗
66. R.H. Johnson: Met. Rev., 1970, vol. 15, pp. 115–34.10.1179/imr.1970.15.1.115 ↗
67. B. Burton: Scripta Metall., 1971, vol. 5, pp. 669–72.10.1016/0036-9748(71)90248-1 ↗
68. G. Rai and N.J. Grant: Metall. Trans. A, 1975, vol. 6A, pp. 385–90.10.1007/BF02667294 ↗
69. A. Arieli and A.K. Mukherjee: Scripta Metall., 1979, vol. 13, pp. 331–38.10.1016/0036-9748(79)90218-7 ↗
70. M.L. Vaidy, K.L. Murty, and J.E. Dorn: Acta Metall., 1973, vol. 21, pp. 1615–23.10.1016/0001-6160(73)90104-1 ↗
71. S.C. Misro and A.K. Mukherjee: Rate Processes in Plastic Deformation, Proc. John E. Dorn Memorial Symp., J.C.M. Li and A.K. Mukherjee, eds., ASM, Cleveland, OH, 1975, pp. 434–58.
72. P.K. Chaudhury, V. Sivaramakrishnan, and F.A. Mohamed: Metall. Trans. A, 1988, vol. 19A, pp. 2741–52.10.1007/BF02645809 ↗
73. K.T. Park and F.A. Mohamed: Metall. Trans. A, 1990, vol. 21A, pp. 2605–08.10.1007/BF02647008 ↗
74. K.T. Park, S.T. Yang, J.C. Earthman, and F.A. Mohamed: Mater. Sci. Eng. A, 1994, vol. A188, pp. 59–67.10.1016/0921-5093(94)90356-5 ↗
75. X.-G. Jiang, S.T. Yang, J.C. Earthman, and F.A. Mohamed: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 863–72.10.1007/BF02649753 ↗
76. K.T. Park, J.C. Earthman, and F.A. Mohamed: Phil. Mag. Lett., 1994, vol. 70, pp. 7–13.10.1080/09500839408243865 ↗
77. S.T. Yang and F.A. Mohamed: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 493–96.10.1007/BF02664685 ↗
78. A. Yousefiani and F.A. Mohamed: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1653–63.10.1007/s11661-998-0088-z ↗
79. A. Yousefiani, J.C. Earthman, and F.A. Mohamed: Acta Mater., 1998, vol. 46, pp. 3557–70.10.1016/S1359-6454(98)00030-5 ↗
80. A. Yousefiani and F.A. Mohamed: Phil. Mag. A, 1999, vol. 79, pp. 1247–62.10.1080/01418619908210359 ↗
81. A. Yousefiani and F.A. Mohamed: Metall. Mater. Trans. A, 2000, vol. 163A, pp. 163–72.10.1007/s11661-000-0062-x ↗
82. R.C. Gifkins: Strength of Metals and Alloys, R.C. Gifkins, ed., Pergamon, Oxford, United Kingdom, 1982, pp. 701–05.10.1016/B978-1-4832-8423-1.50115-2 ↗
83. T.H. Alden: J. Aust. Inst. Met., 1969, vol. 14, pp. 207–16.
84. F.A. Mohamed: J. Mater. Sci., 1983, vol. 18, pp. 582–92.10.1007/BF00560647 ↗
85. F.A. Mohamed: J. Mater. Sci. Lett., 1988, vol. 7, pp. 215–17.10.1007/BF01730174 ↗
86. D. Mclean: Metal Forum, 1981, vol. 4, pp. 44–47.
87. M.P. Seah: Acta Metall., 1977, vol. 25, pp. 345–57.10.1016/0001-6160(77)90153-5 ↗
88. P. Gas, M. Guttmann, and J. Bemardini: Acta Metall., 1982, vol. 30, pp. 1309–16.10.1016/0001-6160(82)90150-X ↗
89. E.A. Grey and G.T. Higgins: Acta Metall., 1973, vol. 21, pp. 309–21.10.1016/0001-6160(73)90186-7 ↗
90. P.A. Beck, J.C. Kremer, L.J. Demer, and M.L. Holzworth: AIME Trans., 1948, vol. 175, pp. 372–94.
91. H. Hu and B.B. Rath: Metall. Trans. A, 1970, vol. 1, pp. 3181–84.10.1007/BF03038435 ↗
92. S. Wienig and E.S. Machlin: AIME Trans., 1957, vol. 209, pp. 843–54.
93. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
94. K. Lücke and H.P. Stüwe: Acta Metall., 1971, vol. 19, pp. 1087–99.10.1016/0001-6160(71)90041-1 ↗
95. M.J. Mayo and W.D. Nix: Acta Metall., 1989, vol. 37, pp. 1121–34.10.1016/0001-6160(89)90108-9 ↗
96. R.C. Gifkins: Scripta Metall., 1991, vol. 25, pp. 1397–1400.10.1016/0956-716X(91)90421-V ↗
97. B. Burton: Diffusional Creep in Polycrystalline Materials, Trans Tech Publications, Bay Village, OH, 1977.
98. F.A. Mohamed and J. Wolfenstine: in Hot Deformation of Aluminum Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris, and M.A. Zaidi, eds., TMS, Warrendale, PA, 1991, pp. 223–37.
99. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Acta Metall., 1988, vol. 36, pp. 1117–28.10.1016/0001-6160(88)90165-4 ↗
100. F.A. Mohamed, K.L. Murty, and J.W. Morris, Jr.: in Rate Processes in Plastic Deformation of Materials, J.C.M. Li and A.K. Mukherjee, eds., ASM, Metals Park, OH, 1975, pp. 459–77.