journal article·2007-11Open access

Mechanisms of Sticking Phenomenon Occurring during Hot Rolling of Two Ferritic Stainless Steels

Chang-Young Son, Chang Kyu Kim, Dae Jin Ha, Sunghak Lee, Jong Seog Lee, Kwang Tae Kim, Yong Deuk Lee

Abstract

Mechanisms of sticking phenomenon occurring during hot rolling of two ferritic stainless steels, STS 430J1L and STS 436L, were investigated in the present study. A hot-rolling simulation test was carried out using a high-temperature wear tester capable of controlling rolling speed, load, and temperature. The test results at 900 °C and 1000 °C revealed that the sticking process proceeded with three stages, i.e., nucleation, growth, and saturation, for the both stainless steels, and that STS 430J1L had a smaller number of sticking nucleation sites and slower growth rate than the STS 436L because of higher high-temperature hardness, thereby leading to less serious sticking. When the test was conducted at 1070 °C, the sticking hardly occurred in both stainless steels as Fe-Cr oxide layers were formed on the surface of the rolled materials. Thus, in order to prevent or minimize the sticking, it was suggested to improve high-temperature properties of stainless steels in the case of hot rolling at 900 °C to 1000 °C, and to establish appropriate rolling conditions and alloy compositions for ready formation of oxide layers in the case of hot rolling at higher temperatures than 1000 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. O. Kato, T. Kawanami: J. Jpn. Soc. Technol. Plast., 1987, vol. 28, pp. 264–71
2. O. Kato, T. Kawanami: J. Jpn. Soc. Technol. Plast., 1989, vol. 30, pp. 103–09
3. O. Kato, S. Uchida, T. Kimuma: Seitetsu Kenkyu, 1989, vol. 335, pp. 35–42
4. S. Uchida, H. Yamamoto, M. Akata, K. Watanabe, and O. Kato: What’s New in Roll Technologies of the World, Report of Research Committee on Rolling Roll, ISIJ, Tokyo, 1995, p. 183
5. S.H. Yu, Y.B. Chun, W.Q. Cao, M.H. Kim, S.W. Chae, S.I. Kwun, D.H. Shin, S.K. Hwang: Met. Mater. Int., 2005, vol. 11, pp. 101–1110.1007/BF03027453 ↗
6. T. Nakanishi: J. Soc. Tribol. Lubr. Eng., 1993, vol. 49, pp. 365–70
7. Y.D. Lee, Y.Y. Lee, O.J. Kwon, G.S. Kim, and Y.G. Lee: Development of Rolling Technology of 430 Stainless Steel, Technical Report of POSCO Research Institute, POSCO, Pohang, 1993
8. M. Pellizzari, A. Molianari, G. Straffelini: Wear, 2005, vol. 259, pp. 1281–8910.1016/j.wear.2004.12.006 ↗
9. J.C. Werquin and J.C. Cailand: in Roll for the Metal Working Industries, R.B. Corbett, ed., ISS, Warrendale, PA, 1990, pp. 55–71
10. W.M. Betts and H.L. Baxter: in Roll for the Metal Working Industries, R.B. Corbett, ed., ISS, Warrendale, PA, 1990, pp. 23–30
11. J.E. Shingly, C.R. Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1989, p. 71
12. M. Hashimoto, H. Takigawa, T. Kawakami: 37th MWSP Conf. Proc., ISS, Warrendale, PA, 1996, pp. 275–82
13. Y.Y. Lee, H. Kim, O.J. Kwon, G.S. Kim, Y.G. Lee, C. Jun, K.S. Kim, and B.S. U: Optimum Process Conditions for the 17 Pct Cr Ferritic Stainless Steel, Technical Report of RIST, RIST, Pohang, Korea, 1992, p. 138
14. Y.H. Moon, J.W. Kim, C.J. Van Tyne: Met. Mater. Int., 2005, vol. 2, pp. 169–7610.1007/BF03027462 ↗
15. I.D. Choi, D.M. Kim, S.J. Kim, D.M. Bruce, D.K. Matlock, J.G. Speer: Met. Mater. Int., 2006, vol. 12, pp. 13–1910.1007/BF03027517 ↗
16. S. Lee, D. Suh, S. Oh, W. Jin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 696–70210.1007/s11661-998-0151-9 ↗
17. ASM Handbook, vol. 18, Friction, Lubrication, and Wear Technology, ASM, Materials Park, OH, 1992
18. C.K. Kim, J.I. Park, S. Lee, Y.C. Kim, N.J. Kim, J.S. Yang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 87–9710.1007/s11661-005-0141-0 ↗
19. L.J. Xu, S.Z. Wei, J.D. Xing, Y. Li, L. Rui: Met. Mater. Int., 2006, vol. 12, pp. 371–7510.1007/BF03027702 ↗
20. W. Jin, J.Y. Choi, Y.Y. Lee: ISIJ Int., 1998, vol. 38, pp. 739–4310.2355/isijinternational.38.739 ↗
21. L.H.S. Luong, T. Heijkoop: Wear, 1981, vol. 71, pp. 93–10210.1016/0043-1648(81)90142-3 ↗
22. W. Jin, J.Y. Choi, and Y.Y. Lee: ISIJ Int., 2000, vol. pp. 789–9310.2355/isijinternational.40.789 ↗