A new analytical approach to predict spacing selection in lamellar and rod eutectic systems
Source abstract
Abstract
The Jackson and Hunt (JH) theory has been modified to relax the assumption of isothermal solid/liquid interface used in their treatment. Based on the predictions of this modified theory, the traditional definitions of regular and irregular eutectics are revised. For regular eutectics, the new model identifies a range of spacing within the limits defined by the minimum undercooling of the α and β phases. For the irregular Al-Si eutectic system, two different spacing selection mechanisms were identified: (1) for a particular growth rate, a nearly isothermal interface can be achieved at a unique minimum spacing λ I ; (2) the average spacing (λ av >λ I ) is essentially dictated by the undercooling of the faceted phase. Based on the modified theoretical model, a semiempirical expression has been developed to account for the influence of the temperature gradient, which is dominant in the irregular Al-Si system. The behavior of the Fe-Fe3C eutectic is also discussed. The theoretical calculations have been found to be in good agreement with the published experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. K.A. Jackson and J.D. Hunt: TMS-AIME, 1966, vol. 236, pp. 1129–42.
2. B. Toloui and A. Hellawell: Acta Metall., 1976, vol. 24, pp. 565–73.10.1016/0001-6160(76)90102-4 ↗
3. R. Elliot and S.M.D. Glenister: Acta Metall., 1980, vol. 28, pp. 1489–94.10.1016/0001-6160(80)90049-8 ↗
4. H. Jones and W. Kurz: Z. Metallkd., 1981, vol. 72, pp. 792–97.
5. L.M. Hogan and H. Song: Metall. Trans. A, 1987, vol. 18A, pp. 707–13.10.1007/BF02649487 ↗
6. P. Magnin, J.T. Mason, and R. Trivedi: Acta Metall. Mater., 1991, vol. 39 (4), pp. 469–80.10.1016/0956-7151(91)90115-H ↗
7. H. Nakae and H. Shin: Int. J. Cast Met. Res., 1999, vol. 11, pp. 345–49.10.1080/13640461.1999.11819297 ↗
8. T. Sato and Y. Sayama: J. Cryst. Growth, 1974, vol. 22, pp. 259–71.10.1016/0022-0248(74)90170-5 ↗
9. D.J. Fisher and W.A. Kurz: Acta Metall., 1980, vol. 28, pp. 777–94.10.1016/0001-6160(80)90155-8 ↗
10. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35 (2), pp. 444–51.10.1063/1.1713333 ↗
11. P. Magnin and W. Kurz: Acta Metall., 1987, vol. 35 (5), pp. 1119–28.10.1016/0001-6160(87)90059-9 ↗
12. M.N. Croker, R.S. Fidler, and R.W. Smith: Proc. R. Soc. London A, 1973, vol. 335, pp. 15–37.10.1098/rspa.1973.0111 ↗
13. P. Magnin and R. Trivedi: Acta Metall. Mater, 1991, vol. 39 (4), pp. 453–67.10.1016/0956-7151(91)90114-G ↗
14. R.M. Jordan and J.D. Hunt: Metall. Trans., 1972, vol. 3, pp. 1385–90.10.1007/BF02643021 ↗
15. A. Juarez-Hernandez and H. Jones: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 327–28.10.1007/s11661-000-0077-3 ↗
16. S.R. Coriell, G.B. McFadden, W.F. Mitchell, B.T. Murray, J.B. Andrews, and Y. Arikawa: J. Cryst. Growth, 2001, vol. 224, pp. 145–54.10.1016/S0022-0248(01)00724-2 ↗
17. A. Ourdjini, J. Liu, and R. Elliot: Mater. Sci. Technol., 1994, vol. 10, pp. 312–18.10.1179/mst.1994.10.4.312 ↗
18. V. Seetharaman and R. Trivedi: Metall. Trans. A, 1988, vol. 19A, pp. 2955–64.10.1007/BF02647722 ↗
19. M. Tassa and J.D. Hunt: J. Cryst. Growth, 1976, vol. 34, pp. 38–48.10.1016/0022-0248(76)90260-8 ↗
20. T. Ejima, T. Yamamura, N. Uchida, Y. Matsuzaki, and M. Nikaido: J. Jpn. Inst. Met., 1985, vol. 44, p. 1651.
21. S.M.D. Borland and R. Elliot: Metall. Trans. A, 1978, vol. 9A, pp. 1063–67.10.1007/BF02652210 ↗
22. J. Liu and R. Elliot: Acta Metall. Mater., 1995, vol. 43 (9), pp. 3301–11.10.1016/0956-7151(95)00051-V ↗
23. M. Hillert and H. Steinhauser: Jernkontorets Ann., 1960, vol. 144, pp. 520–59.
24. P. Magnin and W. Kurz: Metall. Trans. A, 1988, vol. 19A, pp. 1955–63.10.1007/BF02645199 ↗
25. G.S. Ershov, A.A. Kasatkin, and I.V. Gavrilin: Russ. Metall., 1978, pp. 62–64.
26. H. Bester and K.W. Lange: Arch. Einsenhuttenwes., 1972, vol. 43, p. 207.
27. M. Kosaka and T. Saito: Bull. Res. Inst. Mining Dressing Met., Tohoku Univ., 1970, vol. 26 (2), p. 105.
28. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1986, p. 242.
29. M.P. Wilkinson and A. Hellawell: Br. Cast Iron Res. Assoc. J., 1963, vol. 11, pp. 439–50.
30. A. Deschanvres and D. Dufournier: Mem. Sci. Rev. Metall., 1970, vol. 67, pp. 277–84.
31. J.S. Park and J.D. Verhoeven: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2328–37.10.1007/BF02651887 ↗
32. H. Jones and W. Kurz: Metall. Trans. A, 1980, vol. 11A, pp. 1265–73.10.1007/BF02653480 ↗
33. M. Petrescu: Z. Metallkd., 1970, vol. 61, pp. 14–18.
34. J. Liu and R. Elliot: Mater. Sci. Eng., 1993, vol. A173, pp. 129–32.10.1016/0921-5093(93)90201-O ↗
35. S. Sen and A. Catalina: Int. Conf. on Solidification Science and Processing: Outlook for the 21st Century, Science Publishers Inc., Enfield, NH, 2001, pp. 171–79.