journal article·2000-01

Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders

K. T. Conlon, E. Maire, D. S. Wilkinson, H. Henein

Publisher page

Abstract

This paper concerns the processing of Al-Cu alloys via a novel powder-metallurgy route. The specific technique used for powder processing involves the rapid solidification of coarse, molten droplets following impulse atomization. This produces a fine, homogeneous, dendritic microstructure within the alloy granules. Following consolidation via hot pressing, the microstructure consists mostly of an Al matrix with fine CuAl2 particles and partially recrystallized dendrites. Further heat treatment and/or thermomechanical processing completes the spheroidization process in the CuAl2 phase. Blending powders with different Cu has been used to make materials with a bimodal distribution of the local particle-volume-fraction content. The high temperature (773 K) strength of these materials decreases with increasing CuAl2 content. This can be explained using a flow model based on superplastic deformation, controlled by diffusion-accommodated sliding at Al grain boundaries. This mechanism may also explain the deformation-enhanced particle coarsening observed during channel-die forging operations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S.F. Corbin and D.S. Wilkinson: Acta Metall. Mater., 1994, vol. 42, p. 1319.10.1016/0956-7151(94)90148-1 ↗
2. S.F. Corbin and D.S. Wilkinson: Acta Metall. Mater., 1994, vol. 42, p. 1311.10.1016/0956-7151(94)90147-3 ↗
3. Ding Yuan, Hani Henein, and John Allan Fallavollita: U.S. Patent 5,609,919, March 11, 1997.
4. J. Fallavollita, D. Yuan, H. Henein, and R. Eadie: EPD Congr., TMS, Warrendale PA, 1994, pp. 863–72.
5. D. Yuan, H. Henein, and R. Eadie: in Recent Metallurgical Advances in Light Metals Industries, S. MacEwen and J.P. Gilardeau, eds., TMS-CIM, Montreal, 1995, pp. 63–73.
6. K. Olsen, G. Sterzik, and H. Henein: in 3rd Int. Symp.: Recycling of Metals and Engineered Materials, P.B. Queneau and R.D. Peterson, eds., TMS, Warrendale, PA, 1995, pp. 67–83.
7. MPIF Standard 05: “Method for Determination of Sieve Analysis of Metal Powders,” Metal Powder Industries Federation, MPIF, Princeton, NJ, 1990.
8. C.M. Boyko and H. Henein: Proc. 2nd Int. Symp. on Computer Software in Chemical and Extractive Metallurgy, C.W. Bale and G.A. Irons, eds., TMS-CIM, Montreal, 1993, pp. 289–301.
9. F.R. Eshellman and J.F. Smith, J. Appl. Phys., 1978, vol. 48, p. 3284.10.1063/1.325278 ↗
10. J.L. Murray: Int. Met. Rev., 1985, vol. 30, p. 211.10.1179/imr.1985.30.1.211 ↗
11. E. Maire, D.S. Wilkinson, J.D. Embury, and H. Henein: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2613–20.10.1007/s11661-998-0233-8 ↗
12. P. Cloetens, M. Pateyron-Salome, J.-Y. Buffiere, G. Peix, J. Baruchel, F. Peyrin, and M. Schlenker: J. Appl. Phys., 1997, vol. 81, p. 5878.10.1063/1.364374 ↗
13. J-Y. Buffiere, E. Maire, C. Verdu, P. Cloetens, M. Pateyron, G. Peix, and J. Baruchel: Mater: Sci. Eng., 1997, vols. A234-A236, p. 633.
14. A.J. Yule and J.J. Dunkley: Atomization of Melts for Powder Production and Spray Deposition, Clarendon Press, Oxford, United Kingdom, 1994.
15. F.P. Incropera and D.P. De Witt: Fundamentals of Heat and Mass Transfer, 2nd ed., Wiley, New York, NY, 1985, pp. 769–71.
16. S.C. Gill and W. Kurz: Acta Metall. Mater., 1995, vol. 43, pp. 139–51.
17. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, p. 11.10.1016/0001-6160(81)90082-1 ↗
18. J.A. Howarth and H. Mondolfo: Acta Metall., 1962, vol. 10, pp. 1037–42.10.1016/0001-6160(62)90072-X ↗
19. E. Maire, D.S. Wilkinson, J.D. Embury, and R. Fougeres: Acta Mater., 1997, vol. 45, p. 5261.10.1016/S1359-6454(97)00147-X ↗
20. G.S. Sohal: Mater. Sci. Technol., 1985, vol. 4, p. 811.10.1179/mst.1988.4.9.811 ↗
21. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
22. M.F. Ashby: Z. Metallkd., 1964, vol. 55, p. 5.
23. P.K. Bakshi and B.P. Kashyap: J. Mater. Sci., 1995, vol. 30, pp. 5065–72.10.1007/BF00356050 ↗
24. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon, Oxford, United Kingdom, 1982.
25. T.S. Lundy and J.F. Murdock: J. Appl. Phys., 1962, vol. 18, p. 1671.10.1063/1.1728808 ↗
26. J.P. Hirth and J. Lothe: Theory of Dislocations, McGraw-Hill, New York, NY, 1968.
27. E. Ho and G.C. Weatherly: Acta Metall., 1975, vol. 23, p. 1451.10.1016/0001-6160(75)90154-6 ↗
28. G.A. Nassef and M. Seury: J. Mater. Sci., 1983, vol. 18, p. 3031.10.1007/BF00700785 ↗
29. E. Hornbogen and U. Koster: in Recrystallisation of Metallic Materials, F. Haessner, ed., Riederer, Stuttgart, 1978, p. 159.
30. E. Levine, I. Greenhut, and H. Margolin: Metall. Trans., 1973, vol. 4, pp. 2519–25.10.1007/BF02644253 ↗
31. G. Grewal and S. Ankem: Metall. Trans. A, 1990, vol. 21A, pp. 1645–54.10.1007/BF02672579 ↗
32. P.K. Bakshi and B.P. Kashyap: J. Mater. Sci., 1994, vol. 29, pp. 2063–70.10.1007/BF01154680 ↗
33. E. Ho and G.C. Weatherly: Met. Sci., 1977, vol. 11, p. 109.10.1016/0036-9748(77)90327-1 ↗
34. D.S. Wilkinson and C.H. Caceres: Acta Metall., 1984, vol. 32, pp. 1335–45.10.1016/0001-6160(84)90079-8 ↗