journal article·2006-12

Microstructure and properties of blended Mg−Al alloys fabricated by semisolid processing

T. K. Nandy, Rebecca M. Messing, J. Wayne Jones, Tresa M. Pollock, D. M. Walukas, R. F. Decker

Publisher page

Abstract

A new procedure for blending die-cast Mg−Al alloys by semisolid processing to achieve controlled variations in microstructure and properties has been investigated. Granules of AM6-B and AZ91D have been blended in varying proportions and Thixomolded at nominal solid fractions of 0.1 and 0.3, respectively. As-molded microstructures and the role of interdifussion during processing have been analyzed in detail by scanning electron microscopy, transmission electron microscopy, and electron microprobe analysis. Tensile properties and failure modes have been analyzed and a strength model that considers solid solution strengthening of Al in the unmelted particles and a rule-of-mixtures behavior for microstructural components is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J.F. King: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH. New York, NY, 2000, pp. 14–22.10.1002/3527607552.ch3 ↗
2. R.L. Edgar: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, New York, NY, 2000, pp. 3–8.
3. P. Humble, Mater. Sci. Forum. 1997, vol. 21, pp. 45–56.
4. R. Rosch, P. Wanke, and S. Kluge: in Magnesium Alloys and Their applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationgesselschaft mbH. Trankfurt. Germany, 1998, pp. 71–77.
5. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
6. J. Mihelich and R.F. Decker, U.S. Patent No. 5.711.366, 1998: U.S. Patent No. 5.819.839, 1998.
7. S.E. Lebeau, D.M. Walukas, and R.F. Decker, U. S. Patent No. 6.299.665B1: U. S. Patent No. 6, 514, 308B2; and U.S. Patent No. 6. 514, 309B2.
8. T. Kr Aune, D.L. Albright, and H. Westengen, SAE Techn. Paper Ser., 1990, vol. 900792, pp. 1–4.
9. T. Kr Aune and H. Westengen: SAE Techn. Paper Ser., 1995, vol. 950424, pp. 21–31.
10. T.K. Nandy, J.W. Jones, T.M. Pollock, D.M. Walukas, and R.F. Decker: in Magnesium Technology 2002, H.I. Kaplan, ed. TMS, Warrendale PA, 2001, pp. 215–20.
11. Phase Diagram of Binary Magnesium Alloys, A.A. Nayeb-Hashmi and J.B. Clark, ed., ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 17–34.
12. R. Decker, R. Carnahan, R. Vining, D. Walukas, S. LeBeau, and N. Prewitt: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft, Frankfurt, Germany, 1998, pp. 545–50.
13. F. Czerwinsky, P.J. Pinet, and J. Overbeeke: in Magnesium Technology 2001, J.H. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 99–102.10.1002/9781118805497.ch19 ↗
14. F. Czerwinsky, A. Zielinska-Lipiec, P.J. Pinet, and J. Overbeeke, Acta Mater., 2001, vol. 49, pp. 1225–35.10.1016/S1359-6454(01)00015-5 ↗
15. R. Carnahan, R. Hathway, R. Kibert, L. Pastermak, and P. Rohatgi: Proc. Int. Symp. on Light Metals Processing and Applications, CIM. Quebec. City, 1993, pp. 325–35.
16. M.S. Dargusch, G.L. Dunlop, and K. Petterson: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft. Frankfurt. Germany, 1998, pp. 277–82.
17. M.D. Nave, A.K. Dahle, and D.H. StJohn: in Magneson Technology 2000, H.I. Kaplan, J. Hryn, and B. Clow, eds., TMS, Warrendale, PA, 2000, pp. 233–42.10.1002/9781118808962.ch33 ↗
18. G. Moreau, J.A. Cornet, and D. Calais, J. Nucl. Mater., 1971, vol. 38 pp. 197–202.10.1016/0022-3115(71)90043-2 ↗
19. C.H. Caceres and D.M. Rovera: J. Light Met., 2001, vol. 1, pp. 151–56.10.1016/S1471-5317(01)00008-6 ↗
20. F. Czerwinski: Acta Mater., 2004, vol. 52, pp. 5057–69.10.1016/j.actamat.2004.07.011 ↗
21. D. Ghosh, K. Kang C, Bach J.G. Roemer, and C. van Schilt: Proc. 34 Annual Conf. of Metallurgist of CIM, Vancouver, B.C. 1995, pp. 481–92