Effect of Volume Fraction of Primary α 2 on the Trigger Stress for Stress-Induced Martensitic Transformation in Two-Phase Ti-Al-Nb Alloys
Source abstract
Abstract
Ti-Al-Nb alloys in the composition range studied in the present investigation were found to undergo stress-induced martensitic transformation (SIMT) in α2 + β heat-treated (two-phase) condition under tensile loading. The effect of different volume fractions of primary α2 on trigger stress for SIM transformation in these alloys was investigated. The trigger stress required for SIM transformation decreased initially when the volume fraction of primary α2 was increased from 0 to 5 pct. However, subsequently, the trigger stress was found to increase with further increase in volume fraction of primary α2 from 5 to 40 pct in all three alloys. An increase in the volume fraction of primary α2 is achieved by changing the solution treatment temperatures, which also results in a change in the β composition and β grain size. The observed variation of trigger stress with the volume fraction of primary α2 from 5 to 40 pct was then explained on the basis of the effect of composition and grain size of the β phase on trigger stress required for stress-induced transformation of β to martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. J.C. Williams: Titanium Science and Technology, Proc. 2nd Int. Conf. on Titanium, Boston, MA, 1972, R.I. Jaffe and H.M. Burte, eds., Plenum Press, New York, NY, 1972, vol. 3, pp. 1433–94
2. T.W. Duerig, G.T. Terelinde, J.C. Williams: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 1987–9810.1007/BF02655118 ↗
3. T.W. Duerig, J. Albrecht, D. Richter, P. Fischer: Acta Metall., 1982, vol. 30, pp. 2161–7210.1016/0001-6160(82)90137-7 ↗
4. T. Grosdidier, C. Roubaud, M.J. Philippe, Y. Combres: Scripta Mater., 1997, vol. 36, pp. 21–2810.1016/S1359-6462(96)00341-7 ↗
5. T. Grosdidier, Y. Combres, E. Gautier, M.J. Philippe: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1095–110610.1007/s11661-000-0105-3 ↗
6. H. Sasano and T. Suzuki: Titanium Science and Technology, Proc. 5th Int. Conf. on Titanium, Munich, Germany, 1984, vol. 3, pp. 1667–74
7. J.S. Lee Park, C.Y. Lei, C.M. Wayman: Mater. Sci. Eng. A, 1991, vol. A132, pp. 237–4410.1016/0921-5093(91)90380-6 ↗
8. C. Lei, M. Wu, L. Mc D. Schetky, and C. Burstone: Proc. 2nd Int. Conf. on Shape Memory and Superelastic Technologies–SMST-97, A.R. Pelton, D. Hodgson, S. Russell, and T. Duerig, eds., Pacific Grove, CA, 1997, pp. 503–08
9. M.H. Wu, P.A. Russo, and J.G. Ferrero: Proc. Int. Conf. on Shape Memory and Superelastic Technologies, A.R. Pelton and T. Duerig, eds., Pacific Grove, Monterey, CA, 2003, pp. 1535–43
10. R.W. Margevicius, J.D. Cotton: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 139–4710.1007/s11661-998-0166-2 ↗
11. A. Paradkar, S.V. Kamat, A.K. Gogia, B.P. Kashyap: Mater. Sci. Eng. A, 2007, vol. 456 A, pp. 292–9910.1016/j.msea.2006.11.156 ↗
12. A. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Mater. Sci. Eng., 2007, DOI 0.1016/j.msea.2007.10.021
13. A. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 551–5810.1007/s11661-007-9432-y ↗
14. P. Laherute, A. Eberhardt, M.J. Phillipe: Mater. Sci. Eng. A, 2005, vol. A396, pp. 223–3010.1016/j.msea.2005.01.022 ↗
15. Y. Liu, P.G. McCormick: ISIJ Int., 1989, vol. 29, pp. 417–2210.2355/isijinternational.29.417 ↗
16. Y. Liu, H. Yang: Mater. Sci. Eng. A, 1999, vol. A260, pp. 240–4510.1016/S0921-5093(98)00959-9 ↗
17. Y.L. Hao, M. Niinomi, D. Kuroda, K. Fukunaga, Y.L. Zhou, R. Yang, A. Suzuki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3137–4410.1007/s11661-002-0299-7 ↗