journal article·2002-08

Grain-size control in Ti-48Al-2Cr-2Nb with yttrium additions

P. B. Trivedi, S. N. Patankar, F. H. Froes, E. G. Baburaj, A. Genç, L. Ovecoglu

Publisher page

Abstract

A gas-atomized (GA) prealloyed powder of the Ti-48Al-2Cr-2Nb intermetallic and 1.6 wt pct Y were mechanically alloyed (MA) and hot isostatically pressed (hipped) to produce a fully dense nanocrystalline material. Mechanical alloying of the as-blended powder for 16 hours resulted in the formation of a disordered fcc phase. Hipping of the alloy powder produced a single-phase nanocrystalline TiAl intermetallic, containing a distribution of 20 to 35-nm-sized Al2Y4O9 particles. The formation of oxide particles occurred by the chemical combination of Al and Y with oxygen, which entered as a contaminant during milling. Oxide particles increased the hardness of the intermetallic compound and minimized grain growth even at 0.8 Tm, where Tm is the melting point of the compound.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. F.H. Froes, C. Suryanarayana, and D. Eliezer: J. Mater. Sci., 1992, vol. 27, pp. 5113–40.10.1007/BF02403806 ↗
2. S. Naka, M. Thomas, and T. Khan: Mater. Sci. Technol., 1992, vol. 8, pp. 291–98.10.1179/mst.1992.8.4.291 ↗
3. D.M. Dimiduk, D.B. Miracle, and C.H. Ward: Mater. Sci. Technol., 1992, vol. 8, pp. 367–75.10.1179/mst.1992.8.4.367 ↗
4. H. Mabuchi, H. Tsuda, Y. Nakayama, and E. Sukedai: J. Mater. Res., 1992, vol. 7, pp. 894–900.10.1557/JMR.1992.0894 ↗
5. Y.-W. Kim and D.M. Dimiduk: Int. Symposium on Advanced Materials (ISAM)- International Conference on Engineering & Technological Sciences, (2000), Beijing, Oct. 11–13, 2000.
6. P.L. Threadgil and B. Wilshire: Met. Sci. J., 1974, vol. 8, pp. 117–24.10.1179/msc.1974.8.1.117 ↗
7. J.D. Parker and B. Wilshire: Met. Sci. J. 1975, vol. 9, pp. 248–52.10.1179/030634575790445053 ↗
8. C.C. Koch: Ann. Rev. Mater. Sci., 1989, vol. 19, pp. 121–43.10.1146/annurev.matsci.19.1.121 ↗
9. C.C. Koch: Mater. Sci. Technol., 1991, vol. 15, pp. 193–245.
10. C. Suryanarayana and F.H. Froes: Mater. Sci. Forum, 1992, vols. 88–90, pp. 445–52.10.4028/www.scientific.net/MSF.88-90.445 ↗
11. P.H. Shingu, B. Huang, S.R. Nishitani, and S. Nasu: Trans. Jpn. Inst. Met., 1988, vol. 29, pp. 3–10.
12. F.H. Froes, C. Suryanarayana, G.H. Chen, A. Frefer, and G. Hyde: J. Mater. Sci., 1992, vol. 44, pp. 26–29.
13. C. Suryanarayana, C.R. Sundaresan, and F.H. Froes: Adv. Powder Metall., 1989, pp. 175–88.
14. E. Arzt: Res. Mech., 1991, vol. 31, pp. 399–453.
15. J. Rosler and E. Arzt: Acta Metall., 1980, vol. 71, pp. 671–83.
16. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Book Company Ltd., London, 1988, pp. 212–19.
17. S. Naka, H. Octor, E. Bouchand, and T. Khan: Scripta Metall., 1989, vol. 23, pp. 501–05.10.1016/0036-9748(89)90440-7 ↗
18. M. Raghaven, J.W. Steeds, and R. Petkovicluton: Metall. Mater. Trans. A, 1982, vol. 13A, pp. 953–57.10.1007/BF02643390 ↗
19. H. Bakker and L.M. Di: Mater. Sci. Forum, 1992, vols. 88–90, p. 27; Zener private communication to C.S. Smith: Trans. Am. Inst. Min. Eng. vol. 175, 1948, p. 47.10.4028/www.scientific.net/MSF.88-90.27 ↗
20. J.S.C. Jang and C.H. Tsau: J. Mater. Sci., 1993, vol. 28, pp. 982–88.10.1007/BF00400883 ↗
21. W. Guo, A. Iasonna, M. Magini, S. Martelli, and F. Padella: J. Mater. Sci., 1994, vol. 29, pp. 2436–44.10.1007/BF00363438 ↗
22. W. Guo, S. Martelli, F. Padella, M. Magini, N. Burgio, E. Paradiso, and U. Franzoni: Mater. Sci. Forum, 1992, vols. 88–90, pp. 139–46.10.4028/www.scientific.net/MSF.88-90.139 ↗
23. C.C. Koch: Mater. Sci. Forum, 1992, vols. 88–90, pp. 243–62.10.4028/www.scientific.net/MSF.88-90.243 ↗
24. H. Ogawa, K. Omuro, and H. Miura: Mater. Sci. Forum, 1995, vols. 179–181, pp. 781–86.10.4028/www.scientific.net/MSF.179-181.781 ↗
25. O.N. Senkov, N. Srisukhumbowornchai, L. Ovecoglu, and F.H. Froes: Scripta Mater., 1998, vol. 39, pp. 691–98.10.1016/S1359-6462(98)00233-4 ↗
26. M. Goncalves: Scripta Metall. Mater., 1991, vol. 25, pp. 835–40.10.1016/0956-716X(91)90234-R ↗
27. A. Waheed and G.W. Lorimer: J. Mater. Lett., 1997, vol. 16, pp. 1643–46.10.1023/A:1018557510550 ↗
28. F.H. Froes, C.M. Cooke, D. Eylon, and K.C. Russell: Titanium Sci. Technol., 1988, vol. 31.