journal article·2004-12

Characterization of retrogression and reaging behavior of 8090 Al-Li-Cu-Mg-Zr alloy

K. S. Ghosh, K. Das, U. K. Chatterjee

Publisher page

Abstract

An 8090 Al-Li-Cu-Mg-Zr alloy in the peak-aged (T8) temper was subjected to retrogression treatment at temperatures above and below the δ′ (Al3Li) solvus line and immediately reaged to various tempers. Retrogression and reaging (RRA) behavior is characterized by hardness testing, tensile testing, transmission electron microscopy (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and electrochemical polarization studies. Retrogression of the T8 temper alloy causes dissolution primarily of δ′ (Al3Li) precipitates into solid solution that results in a decrease of hardness and tensile strength and an increase of ductility of the alloy. Reaging of the retrogressed state causes reprecipitation of the δ′ precipitates in the matrix resulting in the restoration of strength and ductility properties. Retrogression and reaging to the peak-aged temper, designated at T77 temper, has been found to retain the strength of the conventional T8 temper, but with the gross aging time in the RRA temper almost twice that of the conventional T8 temper, the microstructure of the RRA temper approaches that of the overaged (T7) temper. Thus, RRA treatment contributes to an improvement of stress corrosion cracking (SCC) resistance over the conventional T8 temper while retaining the mechanical properties of T8 temper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. ASM Specialty Handbook, Aluminum and Aluminum Alloys, J.R. Davis, ed., ASM INTERNATIONAL, The Materials Information Society, Materials Park, OH, 1998, pp. 121–42.
2. M. Ahmad and T. Ericsson: Aluminum Lithium III, Proc. 3rd Int. Conf. on Aluminum Lithium Alloys, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 509–15.
3. J.R. Pickers, F.H. Heubaum, T.J. Langan, and L.S. Kramer: Aluminum Lithium V, Proc. 5th Int. Aluminum Lithium Conf., T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Materials and Component Engineering Publications (MCEP), Warrendale, PA, 1989, pp. 1397–414.
4. N.J.H. Holroyd, A Gray, G.M. Scamans, and R. Hermann: Aluminum Lithium III, Proc. 3rd Int. Conf. on Aluminum Lithium Alloys, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 310–20.
5. F. Binsfeld, M. Habashi, J. Galland, J.P. Fidelle, D. Minnay, and P. Rofidal: Aluminum Lithium IV, Proc. 4th Int. Aluminum Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., J. Phys., Paris, Suppl. 1987, vol. 48, pp. C3:587–C3:96.10.1051/jphyscol:1987368 ↗
6. B. Cina: U.S. Patent No. 3,856,584, Dec. 24, 1974.
7. B. Cina and B. Ranish: Paper No. XXV, Aluminium Industrial Products, ASM, Pittsburgh, PA, Oct. 1974.
8. P.J. Gregson and H.M. Flower: J. Mater Sci. Lett., 1984, vol. 3, pp. 829–34.10.1007/BF00727987 ↗
9. P.J. Gregson and H.M. Flower: Proc. Int. Conf. on Aluminium Technology ’86, T. Sheppard, ed., The Institute of Metals, London, 1986, pp. 423–28.
10. P.J. Gregson, H.M. Flower, C.N.J. Tite, and A.K. Mukhopadhyay: Mater. Sci. Technol., 1986, vol. 2, pp. 349–53.10.1179/mst.1986.2.4.349 ↗
11. W.S. Miller, J. White, and D.J. Lloyd: Aluminum Lithium IV, Proc. 4th Int. Aluminum Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., J. Phys., Paris, Suppl. 1987, vol. 48, pp. C3:131–C3:49.10.1051/jphyscol:1987317 ↗
12. K. Ural: J. Mater. Sci. Lett., 1994, vol. 13, pp. 383–85.10.1007/BF00420806 ↗
13. Nguyen Cong Danh, Krishna Rajan, and W. Wallace: Metall. Trans. A, 1983, vol. 14A pp. 1843–50.10.1007/BF02645554 ↗
14. M. Kanno, I. Araki, and Q. Cui: Mater. Sci. Technol., 1994, vol. 10, pp. 599–603.10.1179/mst.1994.10.7.599 ↗
15. K. Rajan, W. Wallace, and J.C. Beddoes: J. Mater. Sci., 1982, vol. 17, pp. 2817–24.10.1007/BF00644656 ↗
16. M. Talianker and B. Cina: Metall. Trans. A, 1989, vol. 20A, pp. 2087–92.10.1007/BF02650294 ↗
17. C. Thakur and R. Balasubramaniam: Acta Mater., 1997, vol. 45, pp. 1323–32.10.1016/S1359-6454(96)00287-X ↗
18. J.K. Park: Mater. Sci. Eng., 1988, vol. A103, pp. 223–31.10.1016/0025-5416(88)90512-5 ↗
19. Matthew B. Hall and John W. Martin: Z. Metallkd, 1994, vol. 85, pp. 134–39.
20. M.U. Islam and W. Wallace: Met. Technol., 1983, vol. 10, pp. 386–92.10.1179/030716983803291893 ↗
21. M.U. Islam and W. Wallace: Met. Technol., 1984, vol. 11, pp. 320–22.10.1179/030716984803274594 ↗
22. B.S. Kaneko: Met. Progr., 1980, vol. 11, pp. 41–43.
23. J.S. Robinson: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1653–58.10.4028/www.scientific.net/MSF.331-337.1653 ↗
24. A. Gray, N.J.H. Holroyd, and J. White: Aluminum Lithium V, Proc. 5th Int. Aluminum Lithium Conf., T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Materials and Component Engineering Publications (MCEP), Warrendale, PA, 1989, pp. 1175–86.
25. V. Komisarov, M. Tlianker, and B. Cina: Mater. Sci. Eng., 1996, vol. A221, pp. 113–21.10.1016/S0921-5093(96)10502-5 ↗
26. V. Komisarov, M. Tlianker, and B. Cina: Mater. Sci. Eng., 1998, vol. A242, pp. 39–49.10.1016/S0921-5093(97)00502-9 ↗
27. Z.Q. Hu, Y. Zhang, Y.L. Liu, and Z.Y. Zhu: Corrosion, 1993, vol. 49, pp. 491–98.10.5006/1.3316078 ↗
28. K.S. Ghosh, K. Das, and U.K. Chatterjee: Online J. Corr. Sci. Eng., 2003, vol. 6, paper no. C014 (preprint available).
29. O. Jensrud and N. Ryum: Mater. Sci. Eng., 1984, vol. 64, pp. 229–36.10.1016/0025-5416(84)90106-X ↗
30. S. Fox, H.M. Flower, and D.C. McDrmaid: Aluminum Lithium III, Proc. 3rd Int. Conf. on Aluminum Lithium Alloys, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 263–72.
31. G.M. Reddy, A.A. Gokhale, and K. Prasad Rao: Sci. Technol. Welding Joining, 1998, vol. 3, pp. 151–58.10.1179/stw.1998.3.3.151 ↗
32. R.E. Ricker, J.L. Fink, and A.K. Vasudevan: Metall Trans., A 1991, vol. 22A, pp. 264–67.10.1007/BF03350971 ↗
33. C.P. Blankenship, Jr. and E.A. Starke: Metall. Trans., 1993, vol. 22A, pp. 833–41.10.1007/BF02656504 ↗
34. K.S. Ghosh, K. Das, and U.K. Chatterjee: Mater. Sci. Technol., 2004, vol. 20, pp. 825–34.10.1179/026708304225019650 ↗
35. T.S. Srivatsan and T. Allan Place: J. Mater. Sci., 1989, vol. 24, pp. 1543–51.10.1007/BF01105669 ↗
36. I.J. Lavernia, T.S. Srivatsan, and F.A. Mohamed: J. Mater. Sci., 1990, vol. 25, pp. 1137–58.10.1007/BF00585420 ↗
37. H.M. Flower and P.J. Gregson: Mater. Sci. Technol., 1987, vol. 3, pp. 81–90.10.1179/mst.1987.3.2.81 ↗
38. R. De Jesus and A.J. Ardell: Al-Li V, pp. 661–76.
39. K. Satya Prasad, A.A. Golhale, A.K. Mokhopadhyay, D. Banerjee, and D.B. Goel: Acta Mater., 1999, vol. 47 (8), pp. 2581–92.10.1016/S1359-6454(99)00102-0 ↗
40. K.S. Kumar, S.A. Brown, and J.R. Pickens: Acta Mater., 1996, vol. 44, pp. 1899–915.10.1016/1359-6454(95)00319-3 ↗
41. S. Caresara, A. Giarda, and A. Sanchez: Phil. Mag., 1977, vol. 35, p. 97.10.1080/14786437708235975 ↗
42. S.F. Baumann and D.B. Williams: Metall. Trans., A 1985, vol. 16A, pp. 1203–11.10.1007/BF02670325 ↗
43. H. Suzuki, M. Kanno, and N. Hayashi: J. Jpn. Inst. Light Met., 1981, vol. 31, p. 122.10.2464/jilm.31.122 ↗
44. V. Radmilovic, G. Thomas, G.J. Shiflet, and E.A. Starke Jr.: Scripta Metall., 1989, vol. 23, pp. 1141–146.10.1016/0036-9748(89)90315-3 ↗
45. Z.F. Wang, Z.Y. Zhu, Y. Zhang, and W. Ke: Metall. Trans. A, 1992, vol. 23A, pp. 3337–41.10.1007/BF03024541 ↗
46. A. Gray: Aluminum Lithium IV, Proc. 4th Int. Aluminum Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., J. Phys., Paris, Suppl. 1987, vol. 48, pp. C3:891–C3:904.10.1051/jphyscol:19873104 ↗
47. J.M. Sater and T.H. Sanders: Aluminum Lithium V, Proc. 5th Int. Aluminum Lithium Conf., T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Materials and Component Engineering Publications (MCEP), Warrendale, PA, 1989, pp. 1217–25.
48. P. Niskanen, T.H. Sanders Jr., J.G. Rinker, and H. Marek: Corr. Sci., 1982, vol. 22, pp. 283–304.10.1016/0010-938X(82)90031-2 ↗
49. A. Luo, D.J. Lloyd, A. Gupta, and W.V. Youdelis: Acta Metall. Mater., 1993, vol. 41, pp. 769–76.10.1016/0956-7151(93)90009-H ↗
50. M.J. Starink, A.J. Hobson, and P.J. Gregson: Scripta Mater., 1996, vol. 34 (11), pp. 1711–16.10.1016/1359-6462(96)00036-X ↗
51. A.K. Mukhopadhyay, C.N.J. Tite, H.M. Flower, P.J. Gregson, and F. Sale: Conf. Proc., Proc. 4th Int. Aluminum Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., J. Phys., Paris, Suppl. 1987, vol. 48, pp. C3:449–C3:446.10.1051/jphyscol:1987350 ↗
52. M. Reboul and P Meyer: Proc. 4th Int. Aluminum Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., J. Phys., Paris, Suppl. 1987, vol. 48, pp. C3:881–C3:89.10.1051/jphyscol:19873103 ↗