journal article·2001-10

New kinetic model for primary recrystallization of pure metals

Erik Woldt

Publisher page

Abstract

In recrystallization experiments on pure metals, quite often the transformation rate observed at higher fractions transformed is distinctly smaller than predicted by the Johnson-Mehl-Avrami-Kolmogorov (JMAK) model.[1,2,3] Stimulated by recent experimental results, two important changes to the model are suggested: a nucleation rate related to the size of the interfacial area “recrystallized-deformed” present and an exponentially decreasing growth rate for each grain. The modified model still yields a sigmoidal curve for the fraction recrystallized. Yet, plotted in order to determine the Avrami exponent, it shows a very similar deviation as that found in experimental results. Further, it will be discussed how the dependence of the recrystallization process on temperature and magnitude of deformation can be incorporated into the model and what the physical reason for the slowing down of the growth rates of the individual grains might be.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · nanoparticles nucleation surface interactions · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. W.A. Johnson and R.F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416–43.
2. M. Avrami: J. Phys. Chem., 1939, vol. 7, pp. 1103–12; J. Phys. Chem., 1940, vol. 8, pp. 212–24; J. Phys. Chem., 1941, vol. 9, pp. 177–84.10.1063/1.1750380 ↗
3. A.N. Kolmogorov: Ivz. Akad. Nauk. SSSR, Ser. Mater., 1937, vol. 3, pp. 355–59.
4. U.R. Evans: Trans. Faraday Soc., 1945, vol. 41, pp. 365–74.10.1039/tf9454100365 ↗
5. J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon Press, Oxford, United Kingdom, 1975, p. 18.
6. J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
7. K.H. Schönborn: Ph.D. Thesis, Technical University Braunschweig, Braunschweig, 1983.
8. L. Kaps: Ph.D. Thesis, Technical University Braunschweig, Braunschweig, 1997.
9. E.C.W. Perryman: Trans. AIME, 1995, vol. 203, pp. 1053.
10. R.A. Vandermeer and P. Gordon: in Recovery and Recrystallization of Metals, L. Himmel, ed., Gordon and Breach, New York, NY, 1963, pp. 211–40.
11. A. Rosen, M.S. Burton, and G.V. Smith: Trans. TMS-AIME, 1964, vol. 230, pp. 205–15.
12. B. Hutchinson, S. Jonsson, and L. Ryde: Scripta Metall., 1989, vol. 23, pp. 671–76.10.1016/0036-9748(89)90510-3 ↗
13. P. Krüger and E. Woldt: Acta Metall. Mater., 1992, vol. 40, pp. 2933–42.10.1016/0956-7151(92)90457-P ↗
14. P. Gordon: Trans. AIME, 1955, vol. 203, pp. 1043–52.
15. E. Woldt and F. Haeßner: Proc. 16th Int. Symp. on Materials Science: “Microstructural and Crystallographic Aspects of Recrystallization”, N. Hansen, D. Juul Jensen, Y.L. Liu, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1995, pp. 229–45.
16. E. Woldt and D. Juul Jensen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1717–24.10.1007/BF02670758 ↗
17. D.J. Srolovitz, G.S. Grest, and M.P. Anderson: Acta Metall., 1986, vol. 34, pp. 1833–45.10.1016/0001-6160(86)90128-8 ↗
18. F. Scholz and E. Woldt: Proc. 19th Int. Symp. on Materials Science: “Modelling of Structure and Mechanics of Materials from Microscale to Product”, J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen, B.F. Sørensen, and G. Winther, eds., Risø National Laboratory, Roskilde, Denmark, 1998, pp. 467–72.
19. F. Scholz: University of Braunschweig, Germany, unpublished research, 1998.
20. E. Underwood: Quantitative Stereology, Addison-Wesley Publishing Co., Reading, MA, 1970, p. 91.
21. V. Erukhimovitch and J. Baram: Phys. Rev. B, 1994, vol. 50, pp. 5854–56.10.1103/PhysRevB.50.5854 ↗
22. V. Erukhimovitch and J. Baram: Phys. Rev. B, 1995, vol. 51, pp. 6221–29.10.1103/PhysRevB.51.6221 ↗
23. C. Michaelsen, M. Dahms, and M. Pfuff: Phys. Rev. B, 1996, vol. 53, p. 11877.10.1103/PhysRevB.53.11877 ↗
24. T. Pusztai and L. Gránásy: Phys. Rev. B, 1998 vol. 57, pp. 14110–18.10.1103/PhysRevB.57.14110 ↗
25. D.P. Birnie III and M.C. Weinberg: J. Chem. Phys., 1995 vol. 103, pp. 3742–46.10.1063/1.470052 ↗
26. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, 1995, p. 211.
27. J.E. Bailey and P.B. Hirsch: Proc. R. Soc. London, 1962, vol. A267, pp. 11–30.
28. H.P. Stüwe: Recrystallization of Metallic Materials, F. Haeßner, ed., Dr. Riederer-Verlag, Stuttgart, 1978, p. 11.
29. D. Juul Jensen: Proc. 16th Int. Symp. on Materials Science: “Microstructural and Crystallographic Aspects of Recrystallization”, N. Hansen, D. Juul Jensen, Y.L. Liu, and B. Ralph, eds., Risø, Roskilde, Denmark, 1995, pp. 119–37.
30. R.D. Doherty: in Recrystallization of Metallic Materials, F. Haeßner, ed., Dr. Riederer-Verlag, Stuttgart, 1978, p. 23.
31. R.A. Vandermeer, D. Juul Jensen, and E. Woldt: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 749–54.10.1007/s11661-997-0061-2 ↗
32. F.J. Humphreys: Recrystallization 92, Proc. Int. Conf. on Recrystallization and Related Phenomena, San Sebastian, Spain, Materials Science Forum, Trans Tech Publications, Aedermannsdorf, 1992, vols. 113–115, pp. 329–34.
33. L.N. Bronstein and K.A. Semendjajew: Taschenbuch der Mathematik, Harri Deutsch Verlag, Thun, 1980, p. 183.