Electrodeposition and characterization of sacrificial copper-manganese alloy coatings: Part II. Structural, mechanical, and corrosion-resistance properties
Source abstract
Abstract
The structure and properties of electrodeposited Mn-rich Cu-Mn coatings were studied in order to assess their potential to provide sacrificial galvanic protection to steels. It is found that a small amount of codeposited copper can stabilize the ductile as-deposited centered tetragonal γ′ phase against roomtemperature recrystallization to the stable bcc α phase. The time to transformation is increasingly delayed with increasing copper content. Phase transformation of crystalline films does not follow the Johnson-Mehl-Avrami-Kolmogorov equation for nucleation and growth transformation. Amorphous coatings do not show any structural transformation at room temperature. Nanomechanical and tribological measurements showed that Cu-Mn coatings have a lower friction coefficient than reference Cd coatings. Cu codeposition reduces the coating’s hardness and elastic modulus and increases the resistance to plastic penetration with respect to pure Mn. Cu-Mn coatings show a barrier or passive behavior under anodic polarization, while the sacrificial characteristics are still preserved. The corrosion appears uniform, and the formation of MnO2 and Cu2O upon anodic polarization may account for the good corrosion performance of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J. Gong and G. Zangari: J. Electrochem. Soc., 2002, vol. 149 (4), pp. C209-C217.10.1149/1.1452117 ↗
2. A. Brenner: Electrodeposition of Alloys, Academic Press, New York, NY, 1963, vol. II, p. 137.10.1016/B978-1-4831-9807-1.50016-7 ↗
3. K.N. Srinivasan, M. Selvam, and S.V.K. Iyer: J. Appl. Electrochem., 1993, vol. 23, pp. 358–63.10.1007/BF00296692 ↗
4. D.R. Gabe, G.D. Wilcox, A. Jamani, and B.R. Pearson: Met. Finishing, 1993, vol. 91 (8), pp. 34–36.
5. Y. Tsuchiya, S. Hashimoto, Y. Ishibashi, T. Urakawa, M. Sagiyama, and Y. Fukuda: Iron Steel Inst. Jpn. Int., 2000, vol. 40 (10), pp. 1024–28.10.2355/isijinternational.40.1024 ↗
6. G.D. Wilcox and B. Petersen: Trans. IMF, 1996, vol. 74 (4), pp. 115–18.10.1080/00202967.1996.11871109 ↗
7. B. Bozzini, P.L. Cavallotti, and F. Pavan: J. Chim. Phys., 1997, vol. 94, pp. 1009–13.10.1051/jcp/1997941009 ↗
8. T. Urakawa, M. Sagiyama, T. Adaniya, and T. Hara: Trans. Iron Steel Inst. Jpn., 1985, vol. 26 (2), p. b67.
9. M.V. Ananth: Trans. IMF, 1997, vol. 75 (6), pp. 224–27.10.1080/00202967.1997.11871179 ↗
10. A. Stephen, M.V. Ananth, and V. Ravichandran: Anti-Corr. Methods Mater., 1999, vol. 46 (2), pp. 117–21.10.1108/00035599910263297 ↗
11. M.V. Ananth: Trans. IMF, 1999, vol. 77 (6), pp. 222–25.10.1080/00202967.1999.11871288 ↗
12. M.V. Ananth and N.V. Parthasaradhy: Mater. Sci. Eng. B, 1990, vol. 7, pp. 103–06.10.1016/0921-5107(90)90013-2 ↗
13. S. Srirveeraraghavan, N.V. Parthasaradhy, R.M. Krishnan, S.R. Natarajan, and H.V.K. Udupa: Met. Finishing, 1981, vol. 79 (11), pp. 57–62.
14. M. Nikolova, N. Atanassov, J. Fischer-Bühner, and A. Zielonka: Trans. IMF, 2000, vol. 78 (4), pp. 147–51.10.1080/00202967.2000.11871328 ↗
15. J. Gong and G. Zangari: Mater. Sci. Eng. A, 2003, vol. 344 (1–2), pp. 268–78.10.1016/S0921-5093(02)00412-4 ↗
16. ASM International Alloy Phase Diagram and Handbook Committees: ASM Handbook, Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 3, pp. 2–172 (Cu-Mn).
17. Z.S. Basinski and J.W. Christian: J. Inst. Met., 1951–52, vol. 80, pp. 659–66.
18. R.S. Dean, J.R. Long, T.R. Graham, E.V. Potter, and E.T. Hayes: Trans. ASM, 1945, vol. 34, pp. 443–64.
19. R.S. Dean, E.V. Potter, J.R. Long, and R.W. Huber: Trans. ASM, 1945, vol. 34, pp. 465–80.
20. E. Persson and E. Öhman: Nature, 1929, vol. 124, pp. 333–34.10.1038/124333a0 ↗
21. J. Gong and G. Zangari: J. Electrochem. Soc., 2004, vol. 151 (5), pp. C297-C306.10.1149/1.1683618 ↗
22. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7 (6), pp. 1564–83.10.1557/JMR.1992.1564 ↗
23. G. Wei, T.W. Scharf, J.N. Zhou, F. Huang, M.L. Weaver, and J.A. Barnard: Surf. Coating Technol., 2001, vols. 146–147, pp. 357–62.10.1016/S0257-8972(01)01403-7 ↗
24. M. Stern and A.L. Geary: J. Electrochem. Soc., 1957, vol. 104, pp. 56–63.10.1149/1.2428496 ↗
25. J. Gong and G. Zangari: Electrochem. Solid-State Lett., 2004, vol. 7 (9), pp. C91–94.10.1149/1.1774972 ↗
26. E.V. Potter and R.W. Huber: Phys. Rev., 1945, vol. 68 (1–2), pp. 24–29.10.1103/PhysRev.68.24 ↗
27. A.D. Rollett, D.J. Srolovitz, R.D. Doherty, and M.P. Anderson: Acta Metall., 1989, vol. 37 (2), pp. 627–39.10.1016/0001-6160(89)90247-2 ↗
28. M. Castro, F. Dominguez-Adame, A. Sanchez, and T. Rodriguez: Appl. Phys. Lett., 1999, vol. 75 (15), pp. 2205–07.10.1063/1.124965 ↗
29. G. Wei, A. Rar, and J.A. Barnard: Thin Solid Films, 2001, vols. 398–399, pp. 460–64.10.1016/S0040-6090(01)01388-8 ↗
30. D.L. Joslin and W.C. Oliver: J. Mater. Res., 1990, vol. 5 (1), pp. 123–26.10.1557/JMR.1990.0123 ↗
31. D.A. Jones: Principles and Prevention of Corrosion, Macmillan Publishing Company, New York, NY, 1992, p. 115.
32. B. Messaoudi, S. Joiret, M. Keddam, and H. Takenouti: Electrochim. Acta, 2001, vol. 46, pp. 2487–98.10.1016/S0013-4686(01)00449-2 ↗
33. M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed., NACE Press, Houston, TX, 1974, pp. 286 and 384.
34. ASM International Handbook Committee: ASM Handbook, vol. 13, Corrosion, ASM INTERNATIONAL, Materials Park, OH, 1987, p. 610.
35. A.A. El-Moneim, B.P. Zhang, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corr. Sci., 1997, vol. 39 (2), pp. 305–20.10.1016/S0010-938X(96)00128-X ↗
36. A.A. El-Moneim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corr. Sci., 1997, vol. 39 (10–11), pp. 1965–79.10.1016/S0010-938X(97)00089-9 ↗
37. A.A. El-Moneim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corr. Sci., 1998, vol. 40 (2–3), pp. 235–50.10.1016/S0010-938X(97)00123-6 ↗
38. A.A. El-Moneim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corr. Sci., 1998, vol. 40 (9), pp. 1513–31.10.1016/S0010-938X(98)00064-X ↗
39. G.D. Wilcox and D.R. Gabe: Corr. Sci., 1993, vol. 35 (5–8), pp. 1251–58.10.1016/0010-938X(93)90345-H ↗
40. C. Debiemme-Chouvy, F. Ammeloot, and E.M.M. Sutter: Appl. Surf. Sci., 2001, vol. 174, pp. 55–61.10.1016/S0169-4332(01)00023-X ↗
41. P. Druska, H.H. Strehblow, and S. Golledge: Corr. Sci., 1996, vol. 38, pp. 835–51.10.1016/0010-938X(96)00170-9 ↗