Reactive infiltration processing and secondary compressive creep of NiAl and NiAl-W composites
Source abstract
Abstract
Reactive infiltration processing was used to fabricate bulk NiAl and fiber-reinforced NiAl composites. Homogenous, pore-free materials were obtained by chemical reaction between nickel and aluminum after complete infiltration with liquid aluminum of preforms of nickel wires (containing tungsten wires for the composites) with low surface-to-volume ratio, high permeability, and regular infiltration paths. Reactively-processed, monolithic NiAl exhibited compressive creep properties at 715 °C and 1025 °C in good agreement with those of conventionally processed NiAl. The compressive creep behavior of NiAl composites reinforced with 5 to 20 vol pct W was also characterized at the same temperatures. At 715 °C, the NiAl-W composites exhibited secondary creep with little primary and tertiary creep, while at 1025 °C, the composites displayed all three stages. Microstructurally, secondary creep was characterized by pure uniaxial compression of tungsten fibers. The measured composite secondary creep rates could be predicted reasonably well with the role-of-mixtures isostrain model developed for composites where both phases undergo creep deformation using tensile creep data measured on the as-received tungsten fibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. D.B. Miracle: Acta Metall. Mater., 1993, vol. 41, pp. 649–84.10.1016/0956-7151(93)90001-9 ↗
2. R.D. Noebe, R.R. Bowman, and M.V. Nathal: Int. Mater. Rev., 1993, vol. 38, pp. 193–232.10.1179/imr.1993.38.4.193 ↗
3. D.M. Dimiduk, D.B. Miracle, and C.H. Ward: Mater. Sci. Technol., 1992, vol. 8, pp. 367–75.10.1179/mst.1992.8.4.367 ↗
4. R. Darolia and W.S. Walston: Structural Intermetallics 1997, M.V. Nathal, R. Wagner, R. Darolia, M. Yamaguchi, C.T. Liu, P.L. Martin, and D.B. Miracle, eds., TMS, Warrandale, PA, 1996, pp. 585–94.
5. N.S. Stoloff: Metall. Trans. A, 1993, vol. 24A, pp. 561–67.10.1007/BF02656626 ↗
6. R.D. Noebe, F.J. Ritzert, A. Misra, and R. Gibala: Iron Steel Inst. Jpn., 1991, vol. 31, pp. 1172–1200.10.2355/isijinternational.31.1172 ↗
7. A. Misra, Z.L. Wu, M.T. Kush, and R. Gibala: Phil. Mag., 1998, vol. 78, pp. 533–50.10.1080/014186198253363 ↗
8. S. Nourbakhsh, F.L. Liang, and H. Margolin: Adv. Mater. Proc., 1988, vol. 3, pp. 57–78.
9. D.E. Alman and N.S. Stoloff: Int. J. Powder Metall., 1991, vol. 27, pp. 29–41.
10. Z.H. Munir and U. Anselmi-Tamburini: Mater. Sci. Rep., 1989, vol. 3, pp. 277–365.10.1016/0920-2307(89)90001-7 ↗
11. H. Chen, M. Kaya, and R.W. Smith: Mater. Lett., 1992, vol. 13, pp. 180–83.10.1016/0167-577X(92)90217-8 ↗
12. K. Suganuma: Mater. Lett., 1993, vol. 16, pp. 22–25.10.1016/0167-577X(93)90176-X ↗
13. D.C. Dunand, J.L. Sommer, and A. Mortensen: Metall. Trans. A, 1993, vol. 24A, pp. 2161–70.10.1007/BF02648590 ↗
14. D.C. Dunand: Mater. Manuf. Proc., 1995, vol. 10, pp. 373–403.10.1080/10426919508935033 ↗
15. C.W. SanMarchi and A. Mortensen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2819–28.
16. A.K. Misra: Report No. 4171, NASA, Washington, DC, 1988.
17. C.W. SanMarchi: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1997.
18. T.A. Venkatesh: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1998.
19. J.A. Isaacs, F. Taricco, V.J. Michaud, and A. Mortensen: Metall. Trans. A, 1991, vol. 22A, pp. 2855–62.10.1007/BF02650246 ↗
20. T.A. Venkatesh, C.W. SanMarchi, A. Mortensen, and D.C. Dunand: in High Temperature Ordered Intermetallic Alloys, C.C. Koch, ed., Materials Research Society, Pittsburgh, PA, 1997, pp. 737–42.
21. P. Nash, M.F. Singleton, and J.L. Murray: Phase Diagrams of Binary Nickel Alloys, P. Nash, ed., ASM, Materials Park, OH, 1991, pp. 3–11.
22. P.S. Khadkikar, I.E. Locci, K. Vedula, and G.M. Michal: Metall. Trans. A, 1993, vol. 24A, pp. 83–94.10.1007/BF02669606 ↗
23. J.H. Yang and C.M. Wayman: Intermetallics, 1994, vol. 2, pp. 111–19.10.1016/0966-9795(94)90005-1 ↗
24. D. Schryvers, Y. Ma, L. Toth, and L. Tanner: Acta Mater., 1995, vol. 43, pp. 4045–56.10.1016/0956-7151(95)00101-Z ↗
25. T. Cheng: J. Mater. Sci. Lett., 1996, vol. 15, pp. 285–89.10.1007/BF00591639 ↗
26. P.L. Potapov, S.Y. Song, V.A. Udovenko, and S.D. Prokoshkin: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1133–42.10.1007/s11661-997-0279-z ↗
27. J. Lasek, T. Chraska, P. Krecek, and P. Bartuska: Scripta Mater., 1997, vol. 37, pp. 897–902.10.1016/S1359-6462(97)00180-2 ↗
28. Y. Ootoshi, K. Fujiwara, Z. Horita, and M. Nemoto: Mater. Trans. JIM, 1998, vol. 39, pp. 225–29.10.2320/matertrans1989.39.225 ↗
29. Z.M. Alkaseeva: Ternary Alloys—A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., Weinheim, New York, 1993, pp. 49–57.
30. D.M. Essock: in Composites, T.J. Reinhart, ed., ASM, Metals Park, OH, 1987, pp. 878–88.
31. R. Warren: Sintered Metal-Ceramic Composites, G.S. Upadhyaya, ed., Elsevier, New York, NY, 1983, pp. 215–37.
32. R.R. Vandervoort, A.K. Mukherjee, and J.E. Dorn: Trans. ASM, 1966, vol. 59, pp. 930–44.
33. W.J. Yang and R.A. Dodd: Met. Sci. J., 1973, vol. 7, pp. 41–47.10.1016/0036-9748(73)90177-4 ↗
34. J.D. Whittenberger: J. Mater. Sci., 1988, vol. 23, pp. 235–40.10.1007/BF01174059 ↗
35. R.R. Bowman, R.D. Noebe, S.V. Raj, and I.E. Locci: Metall. Trans. A, 1992, vol. 23A, pp. 1493–1508.10.1007/BF02647332 ↗
36. K. Sadananda and C.R. Feng: Mater. Sci. Eng., 1993, vol. A170, pp. 199–214.10.1016/0921-5093(93)90381-N ↗
37. S.V. Raj and S.C. Farmer: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 343–56.10.1007/BF02664671 ↗
38. S.V. Raj, A. Garg, and T.R. Bieler: High-Temperature Ordered Intermetallic Alloys VII, C.C. Koch et al., eds., Materials Research Society, Pittsburgh, PA, 1997, pp. 473–78.
39. K. Xu and R.J. Arsenault: Acta Mater., 1999, vol. 47, pp. 3023–40.10.1016/S1359-6454(99)00146-9 ↗
40. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon, New York, NY, 1982, pp. 34–35.
41. J.W. Pugh: Proc. ASTM, 1957, vol. 57, pp. 909–16.
42. B. Harris and E.G. Ellison: Trans. ASM, 1966, vol. 59, pp. 744–54.
43. T.A. Venkatesh and D.C. Dunand: Acta Mater., 1999, vol. 47, pp. 4275–82.10.1016/S1359-6454(99)00308-0 ↗
44. T.A. Venkatesh and D.C. Dunand: unpublished research, 1999.
45. M. McLean: Mechanical Behavior of In-Situ Composites, The Metals Society, London, 1983, pp. 207–56.
46. S. Goto and M. McLean: Acta Mater., 1991, vol. 39, pp. 153–64.10.1016/0956-7151(91)90263-Z ↗