journal article·2000-03

Grain boundary faceting and abnormal grain growth in nickel

Sung Bo Lee, Duk Yong Yoon, Nong Moon Hwang, Michael F. Henry

Publisher page

Abstract

A correlation between grain boundary faceting and abnormal grain growth has been observed in recrystallized polycrystalline Ni at varying annealing temperatures, with or without C added. Carburized Ni specimens deformed to 50 pct show faceted grain boundaries and abnormal grain growth when annealed at temperatures below 0.7 T m , where T m is the melting point of Ni in absolute scale. When annealed at or above 0.7 T m , the grain boundaries are smoothly curved and, therefore, have a rough structure, and normal grain growth is observed. In the specimens annealed in vacuum without carburization, all grain boundaries are faceted at 0.55 T m , and some of them become defaceted at higher temperatures. The specimens annealed in vacuum at temperatures between 0.55 and 0.95 T m show abnormal grain growth. When the grain boundaries have a rough structure and are, therefore, nearly isotropic, normal grain growth is indeed expected, as shown by the simulation and analytical treatment. When all or a fraction of the grain boundaries are faceted, with the facet planes corresponding to the singular cusp directions in the variation of the boundary energy against the inclination angle, abnormal grain growth can occur either because some grain boundary junctions become immobile due to a torque effect, or the growth occurs by a step mechanism.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. C.G. Dunn: Acta Metall., 1953, vol. 1, pp. 163–75; Acta Metall., 1954, vol. 2, pp. 173–83.10.1016/0001-6160(53)90055-8 ↗
2. C.G. Dunn and J.L. Walter: in Recrystallization, Grain Growth and Textures, H. Margolin, ed., ASM, Metals Park, OH, 1966, pp. 461–521.
3. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
4. J. Calvet and C. Renon: Mem. Sci. Rev. Metall., 1960, vol. 57, pp. 345–62.
5. T. Gladman: Proc. R. Soc. London A, 1966, vol. A294, pp. 298–309.
6. J.L. Walter: Acta Metall., 1959, vol. 7, pp. 424–26.10.1016/0001-6160(59)90056-2 ↗
7. M. McLean and H. Mykura: Acta Metall., 1965, vol. 13, pp. 1291–97.10.1016/0001-6160(65)90040-4 ↗
8. H.J. Frost, C.V. Thompson, and D.T. Walton: Acta Metall. Mater., 1992, vol. 40, pp. 779–93.10.1016/0956-7151(92)90020-F ↗
9. F.D. Rosi, B.H. Alexander, and C.A. Dube: Trans. TMS-AIME, 1952, vol. 152, pp. 189–96.
10. B. Gunther, A. Kumpmann, and H.-D. Kunze: Scripta Metall. Mater., 1992, vol. 27, pp. 833–38.10.1016/0956-716X(92)90401-Y ↗
11. C.J. Simpson, K.T. Aust, and W.C. Winegard: Metall. Trans., 1971, vol. 2, pp. 987–91.10.1007/BF02664229 ↗
12. M.L. Kronberg and F.H. Wilson: Trans. TMS-AIME, 1949, vol. 185, pp. 501–14.
13. V.Y. Gertsman and R. Birringer: Scripta Metall. Mater., 1994, vol. 30, pp. 577–81.10.1016/0956-716X(94)90432-4 ↗
14. V. Randle and D. Horton: Scripta Metall. Mater., 1994, vol. 31, pp. 891–95.10.1016/0956-716X(94)90498-7 ↗
15. G. Riontino, C. Antonione, L. Battezzati, F. Marino, and M. Tabasso: J. Mater. Sci., 1979, vol. 14, pp. 86–90.10.1007/BF01028331 ↗
16. E.L. Holmes and W.C. Winegard: Acta Metall., 1959, vol. 7, pp. 411–14.10.1016/0001-6160(59)90051-3 ↗
17. H.E. Grenoble: IEEE Trans. Mag., 1977, Mag. 13, pp. 1427–32.10.1109/TMAG.1977.1059579 ↗
18. H.C. Fiedler: Metall. Trans. A, 1977, vol. 8A, pp. 1307–12.10.1007/BF02643846 ↗
19. C.P. Jongenberger and R.F. Singer: in New Materials by Mechanical Alloying Techniques, E. Arzt and L. Shultz, eds., DGM, Erlangen, 1989, pp. 157–74.
20. E.W. Hart: The Nature and Behavior of Grain Boundaries, H. Hu, ed., Plenum Press, New York, NY, 1972, pp. 155–70; M. Guttmann: Metall. Trans. A, 1977, vol. 8A, pp. 1383–1401.10.1007/978-1-4757-0181-4_6 ↗
21. C. Rottman: Phys. Rev. Lett., 1986, vol. 57, pp. 735–38.10.1103/PhysRevLett.57.735 ↗
22. H. Sautter, H. Gleiter, and G. Baro: Acta Metall., 1977, vol. 25, pp. 467–73.10.1016/0001-6160(77)90237-1 ↗
23. U. Erb and H. Gleiter: Scripta Metall., 1979, vol. 13, pp. 61–64.10.1016/0036-9748(79)90390-9 ↗
24. E.M. Fridman, C.V. Kopezky, and L.S. Shvindlerman: Z. Metallkd., 1975, vol. 66, pp. 533–39.
25. L.S. Shvindlerman and B.B. Straumal: Acta Metall., 1985, vol. 33, pp. 1735–49.10.1016/0001-6160(85)90168-3 ↗
26. E.L. Maksimova, L.S. Shvindlerman, and B.B. Straumal: Acta Metall., 1988, vol. 36, pp. 1573–83.10.1016/0001-6160(88)90225-8 ↗
27. E.L. Maksimova, E.I. Rabkin, L.S. Shvindlerman, and B.B. Straumal: Acta Metall., 1989, vol. 37, pp. 1995–98.10.1016/0001-6160(89)90083-7 ↗
28. J.W. Cahn: J. Phys. Colloq. 6, 1982, No. 12, pp. 199–213.10.1007/BF00726849 ↗
29. E.L. Hall, J.L. Walter, and C.L. Briant: Phil. Mag. A, 1982, vol. 45A, pp. 753–70.10.1080/01418618208239901 ↗
30. M.D. Vaudin, M. Rühle, and S.L. Sass: Acta Metall., 1983, vol. 31, pp. 1109–16.10.1016/0001-6160(83)90206-7 ↗
31. P. Viswanathan and C.L. Bauer: Metall. Trans., 1973, vol. 4, pp. 2645–50.10.1007/BF02644270 ↗
32. W.R. Wagner, T.Y. Tan, and R.W. Balluffi: Phil. Mag., 1974, vol. 29, pp. 895–904.10.1080/14786437408222078 ↗
33. M.S. Masteller and C.L. Bauer: Phil. Mag. A, 1978, vol. 38A, pp. 697–706.10.1080/01418617808239265 ↗
34. P.J. Goodhew, T.Y. Tan, and R.W. Balluffi: Acta Metall., 1978, vol. 26, pp. 557–67.10.1016/0001-6160(78)90108-6 ↗
35. T.E. Hsieh and R.W. Balluffi: Acta Metall., 1989, vol. 37, pp. 2133–39.10.1016/0001-6160(89)90138-7 ↗
36. J.R. Rellick, C.J. McMahon, H.L. Marcus, and P.W. Palmberg: Metall. Trans., 1971, vol. 2, p. 1492–94.10.1007/BF02913388 ↗
37. C. Pichard, J. Rieu, and C. Goux: Mem. Sci. Rev. Metall., 1973, vol. 70, pp. 13–22.
38. A.M. Donald and L.M. Brown: Acta Metall., 1979, vol. 27, pp. 59–66.10.1016/0001-6160(79)90056-7 ↗
39. A. Donald: Phil. Mag., 1976, vol. 34, pp. 1185–89.10.1080/00318087608227739 ↗
40. T.G. Ference and R.W. Balluffi: Scripta Metall., 1988, vol. 22, pp. 1929–34.10.1016/S0036-9748(88)80240-0 ↗
41. M. Menyhard, B. Blum, and C.J. McMahon, Jr.: Acta Metall., 1989, vol. 37, pp. 549–57.10.1016/0001-6160(89)90238-1 ↗
42. G. Henry, J. Plateau, X. Wache, M. Gerber, I. Behar, and C. Crussard: Mem. Sci. Rev. Metall., 1959, vol. 56, pp. 417–26.
43. H. Gleiter: Z. Metallkd., 1970, vol. 61, pp. 282–87.
44. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, Warrendale, PA, 1994, pp. 369–415.
45. A.V. Andrejeva, G.I. Salnikov, and L.K. Fionova: Acta Metall., 1978, vol. 26, pp. 1331–36.10.1016/0001-6160(78)90148-7 ↗
46. A.V. Andrejeva and L.K. Fionova: Fiz. Met. Metall., 1981, vol. 52, pp. 593–603.
47. C.W. Park: Korea Advanced Institute of Science and Technology, Taejon, private communication, 1998.
48. G.A. Gjostein: Acta Metall., 1963, vol. 11, pp. 957–67.10.1016/0001-6160(63)90065-8 ↗
49. P.G. Shewmon and W.M. Robertson: in Metal Surfaces, W.D. Robertson and N.A. Gjostein, eds., ASM, Metals Park, OH, 1963, pp. 67–98.
50. C. Herring: Phys. Rev., 1951, vol. 82, pp. 87–93; in Structure and Properties of Solid Surfaces, R. Gomer and C.S. Smith, eds., University of Chicago Press, Chicago, 1953, pp. 5–81.10.1103/PhysRev.82.87 ↗
51. F.C. Frank: in Metal Surfaces, W.D. Robertson and N.A. Gjostein, eds., ASM, Metals Park, OH, 1963, pp. 1–15.
52. A.P. Sutton and R.W. Balluffi: Acta Metall., 1987, vol. 35, pp. 2177–2201.10.1016/0001-6160(87)90067-8 ↗
53. A.H. King: Grain Growth in Polycrystalline Materials III, Proc. 3rd Int. Conf. on Grain Growth, H. Weiland, B.L. Adams and A.D. Rollett, eds., TMS, Warrendale, PA, 1998, pp. 333–38.
54. D.W. Hoffman and J.W. Cahn: Surf. Sci., 1972, vol. 31, pp. 368–88; J.W. Cahn and D.W. Hoffman: Acta Metall., 1974, vol. 22, pp. 1205–14.10.1016/0039-6028(72)90268-3 ↗
55. H. Gleiter: Acta Metall., 1969, vol. 17, pp. 565–73.10.1016/0001-6160(69)90115-1 ↗
56. Y.J. Park, N.M. Hwang, and D.Y. Yoon: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2809–19.10.1007/BF02652373 ↗
57. D.P. Woodruff: The Solid-Liquid Interface, Cambridge University Press, London, 1973, pp. 151–73.
58. K.A. Jackson and B. Chalmers: Can. J. Phys., 1956, vol. 34, pp. 473–90.10.1139/p56-054 ↗
59. J.W. Cahn: Acta Metall., 1960, vol. 8, pp. 554–62.10.1016/0001-6160(60)90110-3 ↗
60. D.E. Temkin: in Crystallization Processes, N.N. Sirota, F.K. Gorskii, and V.M. Varikash, eds., English translation published by Consultants Bureau, New York, NY, 1966.
61. R.C. Sun and C.L. Bauer: Acta Metall., 1970, vol. 18, pp. 639–47.10.1016/0001-6160(70)90093-3 ↗
62. S. Tsurekawa, T. Ueda, K. Ichikawa, H. Nakashima, Y. Yoshitomi, and H. Yoshinaga: Mater. Sci. Forum, 1996, vols. 204–206, pp. 221–26.10.4028/www.scientific.net/MSF.204-206.221 ↗
63. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
64. K. Lucke and H.P. Stuwe: Recovery and Recrystallization of Metals, L. Himmel, ed., Interscience, New York, NY, 1963, pp. 171–210.
65. D.J. Srolovitz, G.S. Grest, and M.P. Anderson: Acta Metall., 1985, vol. 33, pp. 2233–47.10.1016/0001-6160(85)90185-3 ↗
66. C.V. Thompson, H.J. Frost, and F. Spaepen: Acta Metall., 1987, vol. 35, pp. 887–90.10.1016/0001-6160(87)90166-0 ↗
67. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
68. C. Wagner: Z. Electrochem., 1961, vol. 65, pp. 581–91.
69. P.R. Rios: Acta Metall. Mater., 1992, vol. 40, pp. 2765–68.10.1016/0956-7151(92)90346-G ↗
70. G.S. Grest, D.J. Srolovitz, and M.P. Anderson: Acta Metall., 1985, vol. 33, pp. 509–20.10.1016/0001-6160(85)90093-8 ↗
71. A.D. Rollett, D.J. Srolovitz, and M.P. Anderson: Acta Metall., 1989, vol. 37, pp.1227–40.10.1016/0001-6160(89)90117-X ↗
72. N.M. Hwang: J. Mater. Sci., 1998, vol. 33, pp. 5625–29.10.1023/A:1004472400615 ↗