Fabrication of iron aluminum alloy/steel laminate by clad rolling
Source abstract
Abstract
Laminates of an iron-aluminum alloy (20Al) and three types of steel—chromium molybdenum (CrMo), high carbon (FeCMn), and precipitation hardening steel with niobium carbide (FeCNb)—were fabricated at 600 °C and 1000 °C by clad rolling based on the compression stress ratio of 20Al to steel. The laminates fabricated at 600 °C exhibit a deformation microstructure with partial recrystallization, while those at 1000 °C reveal a refined microstructure. The 20Al layer of all the laminates exhibit a {001}〈110〉 texture, and the intensity of the texture increases with a decrease in the fabrication temperature and an increase in the reduction. The bending deformability of a laminate increases with a decrease in the compression stress ratio and by a reduction in the intensity of the {001}〈110〉 texture. The clad plate is further rolled at room temperature to a thickness of approximately 150 µm, which enables winding without damage. It is concluded that a high-strength steel at high temperatures and a high Al content in the Fe-Al alloy is beneficial for the fabrication of deformable laminates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. C.T. Liu, E.P. George, P.J. Maziasz, and J.H. Schneibel: Mater. Sci. Eng., 1998, vol. A258, pp. 84–98.10.1016/S0921-5093(98)00921-6 ↗
2. M.G. Mendiratta, S.K. Ehlers, and H.A. Lipsitt: Metall. Trans., 1987, vol. 18A, pp. 509–18.10.1007/BF02649468 ↗
3. C.G. McKamey, J.H. DeVan, P.F. Tortorelli, and V.K. Sikka: J. Mater. Res., 1991, vol. 6, pp. 1779–805.10.1557/JMR.1991.1779 ↗
4. D.G. Morris and S. Gunther: Mater. Sci. Eng., 1996, vol. A208, pp. 7–19.10.1016/0921-5093(95)10041-5 ↗
5. I. Baker and P.R. Munroe: Int. Mater. Rev., 1997, vol. 42, pp. 181–205.10.1179/imr.1997.42.5.181 ↗
6. P.R. Munroe and I. Baker: Acta Metall. Mater., 1991, vol. 39, pp. 1011–17.10.1016/0956-7151(91)90302-H ↗
7. C.T. Liu, E.H. Lee, and C.G. McKamey: Scripta Metall., 1989, vol. 23, pp. 875–80.10.1016/0036-9748(89)90263-9 ↗
8. C.T. Liu, C.G. McKamey, and E.H. Lee: Scripta Metall., 1989, vol. 24, pp. 385–89.10.1016/0956-716X(90)90275-L ↗
9. R.J. Lynch, K.A. Gee, and L.A. Heldt: Scripta Metall. Mater., 1994, vol. 30, pp. 945–50.10.1016/0956-716X(94)90420-0 ↗
10. J.C.M. Li and C.T. Liu: Scripta Metall. Mater., 1992, vol. 27, pp. 1701–05.10.1016/0956-716X(92)90005-Y ↗
11. D. Li, A. Shan, Y. Liu, and D. Lin: Scripta Metall. Mater., 1995, vol. 33, pp. 681–85.10.1016/0956-716X(95)00283-2 ↗
12. D. Lin, A. Shan, and M. Chen: Intermetallics, 1996, vol. 4, pp. 489–96.10.1016/0966-9795(96)00027-1 ↗
13. M. Kupka: Intermetallics, 2004, vol. 12, pp. 295–302.10.1016/j.intermet.2003.11.001 ↗
14. P.J. Maziasz, G.M. Goodwin, C.T. Liu, and S.A. David: Scripta Metall. Mater., 1992, vol. 27, pp. 1835–40.10.1016/0956-716X(92)90029-E ↗
15. V.K. Sikka: International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications, S.C. Deevi, V.K. Sikka, P.J. Maziasz, and R.W. Cahn, eds., ASM, Materials Park, OH, 1997, pp. 361–76.
16. M.R. Hajaligol, S.C. Deevi, V.K. Sikka, and C.R. Scorey: Mater. Sci. Eng., 1998, vol. A258, pp. 249–65.10.1016/S0921-5093(98)00941-1 ↗
17. S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 679–85.10.1016/S0966-9795(99)00129-6 ↗
18. N. Masahashi, N. Kondo, and S. Hanada: Ann. Chim. Sci Mat., 2002, vol. 27, pp. S231–42.
19. N. Masahashi, K. Komatsu, S. Watanabe, and S. Hanada: J. Alloy Compound., 2004, vol. 379, pp. 272–79.10.1016/j.jallcom.2004.02.043 ↗
20. N. Masahashi, S. Watanabe, N. Nomura, S. Semboshi, and S. Hanada: Intermetallics, 2005, vol. 13, pp. 717–26.10.1016/j.intermet.2004.12.017 ↗
21. N. Masahashi, K. Komatsu, G. Kimura, S. Watanabe, and S. Hanada: Mater. Sci. Forum, 2005, vol. 502, pp. 379–94.10.4028/www.scientific.net/MSF.502.379 ↗
22. N. Masahashi, G. Kimura, M. Oku, K. Komatsu, S. Watanabe, and S. Hanada: Corros. Sci., 2006, in press.
23. N. Masahashi, K. Komatsu, S. Watanabe, and S. Hanada: J. Mater. Sci., 2006, in press.
24. X. Gomez and J. Echeberria: Mater. Sci. Eng., 2003, vol. A348, pp. 180–91.10.1016/S0921-5093(02)00686-X ↗
25. K. Nakasuji, K. Kuroda, and C. Hayashi: ISIJ Int., 1995, vol. 35, pp. 188–96.10.2355/isijinternational.35.188 ↗
26. M. Dzubinsky, F. Kovac, and A. Petercakova: Metalurgija, 2003, vol. 42, pp. 179–83.
27. L. Schindler, E. Hadasik, and R. Kawalla: Steel Res. Int., 2003, vol. 74, pp. 617–23.10.1002/srin.200300241 ↗
28. K.S. Park, K.-T. Park, D.L. Lee, and C.S. Lee: ISIJ Int., 2005, vol. 45, pp. 1352–7.10.2355/isijinternational.45.1352 ↗
29. J.S. Wang, Z.Y. Jiang, A.K. Tieu, X.H. Liu, and G.D. Wang: J. Mater. Proc. Tech, 2005, vol. 162, pp. 585–90.10.1016/j.jmatprotec.2005.02.126 ↗
30. M. Hölscher, D. Raabe, and K. Lücke: Steel Res., 1995, vol. 62, pp. 567–75.10.1002/srin.199100451 ↗
31. D.G. Morris and S. Gunter: Scripta Mater., 1996, vol. 35, pp. 1211–16.10.1016/1359-6462(96)00272-2 ↗
32. D. Raabe and J. Keichel: Mater. Sci. Eng., 1995, vol. A203, pp. 208–16.10.1016/0921-5093(95)09872-0 ↗
33. G. Kimura, N. Masahashi, S. Watanabe, and S. Hanada: Collected Abstracts of the 2004 Fall Meeting of the Japan Institute of Metals, 2004, p. 284.