Reduction of porosity in oxide dispersion-strengthened alloys produced by powder metallurgy
Source abstract
Abstract
In this work, the porosity in a iron-based oxide dispersion-strengthened (ODS) alloy, namely, PM2000, has been studied together with its recrystallization behavior. It has been found that pores are only found in coarse secondary recrystallized grains formed at the early stage of recrystallization. It is suggested that a lack of fast diffusion paths, particularly grain boundaries, will prevent gas trapped in the materials during mechanical alloying (MA) from diffusing away, and porosity is formed as a result. Thus, it is proposed that an extended anneal below the secondary recrystallization temperature will help to reduce the subsequent evolution of porosity in these materials, and the method has been demonstrated to work successfully in PM2000.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. E.F. Bradley: Superalloys: A Technical Guide, ASM INTERNATIONAL, Metals Park, OH, 1988.
2. New Materials by Mechanical Alloying Techniques, DGM Conf., Oct. 1988, E. Artz and L. Schultz, eds., Deutsche Gesellschaft fuer Metallkunde, Oberursel, Germany, 1989.
3. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, John Wiley and Sons, New York, NY, 1987.
4. D.M. Jeager: Ph.D. Thesis, The University of Liverpool, Liverpool, 1994.
5. H.D. Hedrich: New Materials by Mechanical Alloying Techniques, DGM Conf., Oct. 1988, E. Artz and L. Schultz, eds., Deutsche Gesellschaft fuer Metallkunde, Oberursel, Germany, (1989), pp. 217–21.
6. A.R. Jones and D.M. Jeager: 13th Annual Conference on Fossil Energy Materials, May 1998, Oak Ridge, TN, p. 2.11.
7. W. Lengauer, P. Ettmayer, G. Korb, and D. Sporer: Powder Metall. Int., 1990, vol. 22, pp. 19–22.
8. D. Sporer, W. Lengauer, P. Ettmayer, and G. Korb: Powder Metall. Int., 1991, vol. 23, pp. 162–65.
9. B. Heine, R. Kirchheim, U. Stolz, and H. Fischmeister: Powder Metall. Int., 1992, vol. 24, pp. 158–63.
10. M. Turker: Ph.D. Thesis, Leeds University, England, 1993.
11. J.D. Whittenberger: Metall. Trans. A, 1977, vol. 8A, pp. 1155–63.10.1007/BF02667401 ↗
12. C. Capdevila, Y.L. Chen, A.R. Jones, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2000, accepted for publication.
13. R.C. Klug, G. Krauss, and D.K. Matlock: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1945–60.10.1007/BF02651944 ↗
14. K. Murakami, K. Mino, H. Harada, and H.K.D.H. Bhadeshia: Metall. Trans. A, 1993, vol. 24A, pp. 1049–55.10.1007/BF02657235 ↗
15. C. Capdevila, Y.L. Chen, A.R. Jones, and H.K.D.H. Bhadeshia: Metall. Trans. A, 1993, vol.
16. H.E. Exner and E. Arzt: in Physical Metallurgy, 4th revised and enchanced edition, R.W. Cahn and P. Haasen, eds., Elsevier Science BV, Amsterdam 1996, pp. 2627–62.10.1016/B978-044489875-3/50036-3 ↗
17. Y.L. Chen and A.R. Jones: unpublished research.
18. B.H. Alexander and R.W. Balluffi: Acta Metall., 1957, vol. 5 pp. 666–71.10.1016/0001-6160(57)90113-X ↗
19. J. Brett and L.L. Seigle: Acta Metall., 1963, vol. 11 pp. 467–72.10.1016/0001-6160(63)90173-1 ↗
20. R.W. Cahn: in Physical Metallurgy, 4th revised and enchanced edition, R.W. Cahn and P. Haasen, eds., Elsevier Science BV, Amsterdam, 1996, pp. 2399–2500.10.1016/B978-044489875-3/50033-8 ↗
21. C. Kooy: Science of Ceramics, Academic Press, London, 1962, p. 21.
22. H.K.D.H. Bhadeshia: Mater. Sci. and Eng. A, 1997, vol. 28A, pp. 64–77.10.1016/S0921-5093(96)10507-4 ↗