Fatigue Strength of Ultrafine Ferrite-Cementite Steels and Effects of Strengthening Mechanisms
Source abstract
Abstract
To investigate the effects of precipitation, solid-solution, and dislocation strengthening on fatigue strength, fatigue tests were conducted on a series of ultrafine ferrite-cementite steels, the ferrite grains of which were smaller than 1 μm. To investigate the effect of precipitation strengthening by carbon addition, which increased the number of cementite particles in the ultrafine ferrite-cementite steel, several steels containing 0.15 pct (in mass pct) carbon and others containing 0.45 pct were studied. The effect of solid-solution strengthening was investigated by adding 0.1 pct phosphorus to some steels. Fatigue tests were also conducted on annealed versions of the ultrafine ferrite-cementite steels, to investigate the effect of dislocation strengthening, since the as-rolled versions were work hardened, due to warm-caliber rolling to refine the ferrite grains. The resultant tensile strength of the lab-prepared ultrafine ferrite-cementite steels ranged from 721 to 1048 MPa. All the lab-prepared ultrafine ferrite-cementite steels showed high fatigue-limit ratios (fatigue-limit/tensile strength) exceeding 0.5. The fatigue strength of the ultrafine ferrite-cementite steel was higher than that of ferrite-pearlite steel, and matched that of tempered martensite steel. In conclusion, all of these strengthening mechanisms satisfactorily improved the fatigue strength of the ultrafine ferrite-cementite steels. The ultrafine ferrite-cementite steel showed stable fatigue strength, due to its microstructure being both ultrafine and uniform.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. N. Tsuji, Y. Saito, H. Utsunomiya, S. Tanigawa: Scripta Mater., 1999, vol. 40, pp. 795–80010.1016/S1359-6462(99)00015-9 ↗
2. A. Azushima, K. Aoki, T. Inoue: Tetsu-to-Hagané, 2001, vol. 87, pp. 762–6610.2355/tetsutohagane1955.87.12_762 ↗
3. T. Hayashi, S. Torizuka, T. Mitsui, K. Tsuzaki, K. Nagai: CAMP-ISIJ, 1999, vol. 12, p. 385
4. A. Ohmori, S. Torizuka, K. Nagai, N. Koseki, Y. Kogo: Tetsu-to-Hagané, 2003, vol. 89, pp. 781–8810.2355/tetsutohagane1955.89.7_781 ↗
5. S. Nishijima, A. Ishii, K. Kanazawa, S. Matsuoka, C. Masuda: NRIM Fatigue Data Sheet Technical Document, No. 5, National Research Institute for Metals, Tokyo, 1989
6. S. Matsuoka, N. Nagashima, S. Nishijima: NRIM Material Strength Data Sheet Technical Document, No. 17, National Research Institute for Metals, Tokyo, 1997
7. T. Abe, T. Sampei, H. Osuzu, I. Kozasu: Tetsu-to-Hagané, 1984, vol. 70, pp. 1459–6610.2355/tetsutohagane1955.70.10_1459 ↗
8. M. Kurita, K. Toyama: Tetsu-to-Hagané, 1994, vol. 80, pp. 66–7110.2355/tetsutohagane1955.80.1_66 ↗
9. M. Kurita, M. Yamamoto, K. Toyama, K. Kunishige: J. Soc. Mater. Sci. Jpn., 1997, vol. 46, pp. 1143–4810.2472/jsms.46.1143 ↗
10. K. Nishioka, T. Nishikawa: Trans. JSME, 1972, vol. 38 (309), pp. 915–2310.1299/kikai1938.38.915 ↗
11. H. Nishitani, H. Horio, H. Noguchi: Trans. JSME Ser. A, 1990, vol. 56 (524), pp. 687–9310.1299/kikaia.56.687 ↗
12. H.W. Hayden, S. Floreen: Metall. Trans., 1973, vol. 4, pp. 561–6810.1007/BF02648710 ↗
13. M. Kurita, K. Toyama, S. Nomura, K. Kunishige: Tetsu-to-Hagané, 1995, vol. 81, pp. 1091–9610.2355/tetsutohagane1955.81.11_1091 ↗
14. A.M. Sherman: Metall. Trans. A, 1975, vol. 6A, pp. 1035–4010.1007/BF02661357 ↗
15. M. Nagae, A. Katoh, H. Kagawa, M. Kurihara, T. Iwasaki, H. Inagaki: Tetsu-to-Hagané, 1982, vol. 68, pp. 1430–3610.2355/tetsutohagane1955.68.9_1430 ↗
16. M. Mizui, O. Akisue: J. Soc. Mater. Sci. Jpn., 1990, vol. 39, pp. 602–0710.2472/jsms.39.602 ↗
17. J.D. Grosier, J.H. Bucher: J. Mater., 1967, vol. 2, pp. 393–407
18. S. Tachibana, S. Kawachi, K. Yamada, T. Kunio: Trans. JSME Ser. A, 1988, vol. 54 (507), pp. 1956–6110.1299/kikaia.54.1956 ↗
19. T. Sawai, S. Matsuoka, K. Tsuzaki: Tetsu-to-Hagané, 2003, vol. 89, pp. 726–3310.2355/tetsutohagane1955.89.6_726 ↗
20. Y. Furuya, S. Matsuoka, S. Shimakura, T. Hanamura, S. Torizuka: Scripta Mater., 2005, vol. 52, pp. 1163–6710.1016/j.scriptamat.2005.01.035 ↗
21. M. Hayakawa, T. Hara, S. Matsuoka, K. Tsuzaki: J. Jpn. Inst. Met., 2000, vol. 64, pp. 460–6610.2320/jinstmet1952.64.6_460 ↗
22. ASTM E112, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1996.
23. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Elsevier, London, 2002
24. S. Nishijima, K. Kanazawa: Fat. Frac. Eng. Mater. Struct., 1999, vol. 22, pp. 601–0710.1046/j.1460-2695.1999.00206.x ↗
25. G.J. Shiflet, H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1413–3210.1007/BF02672560 ↗
26. M. Suehiro: CAMP-ISIJ, 1998, vol. 11, p. 578
27. K.W. Liu, F. Mücklich: Acta Mater., 2001, vol. 49, pp. 395–40310.1016/S1359-6454(00)00340-2 ↗
28. P.A. Carvalho, I. Fonseca, M.T. Marques, J.B. Correia, A. Almeida, R. Vilar: Acta Mater., 2005, vol. 53, pp. 967–7610.1016/j.actamat.2004.10.042 ↗
29. Y. Furuya, S. Matsuoka: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1715–2310.1007/s11661-004-0080-1 ↗