The microstructural development of Mg-9 pct Al-1 pct Zn alloy during injection molding
Source abstract
Abstract
Ex-situ microstructural analysis was used in order to assess the high-temperature transformations of the Mg-9 pct Al-1 pct Zn alloy within the injection-molding system. In addition to as-cast ingot, chipped feedstock, and final products, the alloy samples at different stages of the process were investigated. It was revealed that the cold deformation during ingot chipping and recrystallization during initial stages of residency inside the barrel led to nucleation and growth of the equiaxed grain structure. Subsequent melting of the Al-rich phase followed by liquid-alloy wetting of α-Mg grain boundaries initiated the formation of the slurry with globular solid particles. The structural evolution of the semisolid alloy under the simultaneous influence of temperature gradient and injection-screw shear is considered, and the mechanisms involved are discussed. It is concluded that during processing of partially remelted alloy the temperature profile along the injection-molding barrel in combination with the feedstock structure are key factors that control both the transformation of the thixotropic slurry and the final morphology of the primary solid phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
2. K.K. Wang, H. Peng, N. Wang, and S. Wang: U.S. Patent 5, 501, 266, 1996.
3. K. Xia and G. Tausing: Mater. Sci. Eng., 1998, vol. A246, pp. 1–10.10.1016/S0921-5093(97)00758-2 ↗
4. F.C. Bennett, R.E. Leontis, and S.L. Couling: Proc. 34th Meeting Int. Magnesium Association, 1977, pp. 23–29.
5. J. Mihelich and R.F. Decker: Apparatus for Processing Corrosive Molten Metals, U.S. Patent 5,711,366, 1998.
6. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–81.10.1007/BF02661090 ↗
7. F. Czerwinski: Acta Mater., 2002, vol. 50, pp. 3267–3283.10.1016/S1359-6454(02)00148-9 ↗
8. C.S. Roberts: Magnesium and Its Alloys, John Wiley & Sons, New York, NY, 1960.
9. E. Aghion and B. Bronfin: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed., The Institute of Materials, London, 1997, pp. 313–25.
10. F. Czerwinski, A. Zielinska-Lipiec, P.J. Pinet, and J. Overbeeke: Acta Mater., 2001, vol. 49, pp. 1225–35.10.1016/S1359-6454(01)00015-5 ↗
11. Microstructural Science, M.G. Burke, E.A. Clark, and E.J. Palmiere, eds., Pittsburgh, PA, 1996, vol. 24, pp. 121–27.
12. R. Gehrman and G. Gottstein: Proc. 12th Int. Conf. on Texture of Materials, Montreal, 1999, pp. 665–70.
13. M. Mabuchi, K. Ameyama, H. Iwasaki, and K. Higashi: Acta Mater., 1999, vol. 47, pp. 2047–57.10.1016/S1359-6454(99)00094-4 ↗
14. K.N. Kraselnikov: J. Mater. Sci. Lett., 1990, vol. 9, pp. 1445–47.10.1007/BF00721611 ↗
15. F. Czerwinski, A. Zielinska-Lipiec, and J.A. Szpunar: Acta Mater., 1999, vol. 47, pp. 2553–66.10.1016/S1359-6454(99)00063-4 ↗
16. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1976.
17. E.F. Emley: Principles of Magnesium Technology, Pergamon Press, Oxford, United Kingdom, 1966.
18. I. Saxl: Stereology of Objects with Internal Structure, Academia Prague, Prague, 1989.
19. A. Joly and R. Mehrabian: J. Mater. Sci., 1976, vol. 11, pp. 1393–1417.10.1007/BF00540873 ↗
20. Y. Li and T.G. Langdon: Metall. Mater. Trans., 1999, vol. 30A, pp. 2059–66.10.1007/s11661-999-0016-x ↗
21. C.P. Chen and C.A. Tsao: Acta Mater. A, 1997, vol. 45, pp. 1955–68.10.1016/S1359-6454(96)00312-6 ↗
22. Y.S. Yang and C.A. Tsao: Scripta Metall. Mater., 1994, vol. 30, pp. 1541–46.10.1016/0956-716X(94)90305-0 ↗
23. R.W. Cahn: Physical Metallurgy, 4th ed., North-Holland, Amsterdam, 1996.
24. K.P. Young, C.P. Kyonka, and J.A. Courtois: U.S. Patent 4,415,374, 1982.10.1016/0375-9474(82)90255-X ↗