Finite Element Modeling of Plane Strain Toughness for 7085 Aluminum Alloy
Source abstract
Abstract
In this work, the constitutive model for 7085-T7X (overaged) aluminum alloy plate samples with controlled microstructures was developed. Different lengths of 2nd step aging times produced samples with similar microstructure but different stress-strain curves (i.e., different nanostructure). A conventional phenomenological strain-hardening law with no strain gradient effects was proposed to capture the peculiar hardening behavior of the material samples investigated in this work. The classical Gurson–Tvergaard potential, which includes the influence of void volume fraction (VVF) on the plastic flow behavior, as well as an extension proposed by Leblond et al.,[3] were considered. Unlike the former, the latter is able to account for the influence of strain hardening on the VVF growth. All the constitutive coefficients used in this work were based on experimental stress-strain curves obtained in uniaxial tension and on micromechanical modeling results of a void embedded in a matrix. These material models were used in finite element (FE) simulations of a compact tension (CT) specimen. An engineering criterion based on the instability of plastic flow at a crack tip was used for the determination of plane strain toughness K Ic . The influence of the microstructure was lumped into a single state variable, the initial void volume fraction. The simulation results showed that the strain-hardening behavior has a significant influence on K Ic .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–1510.1115/1.3443401 ↗
2. V. Tvergaard: Int. J. Fract., 1981, vol. 17, pp. 389–40610.1007/BF00036191 ↗
3. J.B. Leblond, G. Perrin, J. Devaux: Eur. J. Mech. A, Solids, 1995, vol. 14, pp. 499–527
4. J.T. Staley: Materials Selection and Design, ASM, Materials Park, OH, 1997, pp. 381–89
5. R.T. Shuey and A.J. den Bakker: Advances in the Metallurgy of Aluminum Alloys, M. Tiryakioglu, ed., ASM INTERNATIONAL, Metals Park, OH, 2001, pp. 189–94
6. J.T. Staley: Properties Related to Fracture Toughness, STP 605, ASTM, Philadelphia, PA, 1976, pp. 71–10310.1520/STP27801S ↗
7. G.T. Hahn, A.R. Rosenfield: Metall. Trans. A, 1975, vol. 6A, pp. 653–7010.1007/BF02672285 ↗
8. P. Tanaka, C.A. Pampillo, and J.R. Low, Jr.: Review of Developments in Plane Strain Fracture Toughness Testing, ASTM Special Technical Publication No. 463, ASTM, Philadelphia, PA, 1970, pp. 191–21510.1520/STP33668S ↗
9. J.C.W. Van de Kasteele, D. Broek: Eng. Fract. Mech., 1977, vol. 9, pp. 625–3510.1016/0013-7944(77)90075-3 ↗
10. D. Broek: Eng. Fract. Mech., 1973, vol. 5, pp. 55–5610.1016/0013-7944(73)90007-6 ↗
11. R.T. Shuey, F. Barlat, M.E. Karabin, and D.J. Chakrabarti: Metall. Mater. Trans. A, 2009, vol. 40A, DOI 10.1007/s11661-008-9703-210.1007/s11661-008-9703-2 ↗
12. G.T. Hahn and A.R. Rosenfield: Applications Related Phenomena in Titanium Alloys, ASTM Special Technical Publication No. 432, ASTM, Philadelphia, PA, 1968, pp. 5–3210.1520/STP33617S ↗
13. P.F. Thomason: Int. J. Fract. Mech., 1971, vol. 7, pp. 409–1910.1007/BF00189111 ↗
14. T.L. Anderson: Fracture Mechanics—Fundamental and Applications, CRC Press, Boca Raton, FL, 1995
15. E. Van der Giessen, A. Needleman: Annu. Rev. Mater. Res., 2002, vol. 32, pp. 141–6210.1146/annurev.matsci.32.120301.102157 ↗
16. W. Brocks: in Continuum Scale Simulation of Engineering Materials–Fundamentals–Microstructures–Process Applications, D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, eds., Wiley-VCH Verlag GmbH, Berlin, 2004, pp. 621–3710.1002/3527603786.ch32 ↗
17. D. Steglich: in Continuum Scale Simulation of Engineering Materials–Fundamentals–Microstructures–Process Applications, D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, eds., Wiley-VCH Verlag GmbH, Berlin, 2004, pp. 817–2810.1002/3527603786.ch45 ↗
18. T. Pardoen, Y. Brechet: Philos. Mag., 2004, vol. 84, pp. 269–9710.1080/14786430310001610366 ↗
19. T. Pardoen, J.W. Hutchinson: Acta Mater., 2003, vol. 51, pp. 133–4810.1016/S1359-6454(02)00386-5 ↗
20. R.M. McMeeking: J. Mech. Phys. Solids, 1977, vol. 25, pp. 357–8110.1016/0022-5096(77)90003-5 ↗
21. A. Needleman, V. Tvergaard: J. Mech. Phys. Solids, 1987, vol. 35, pp. 151–8310.1016/0022-5096(87)90034-2 ↗
22. T. Pardoen, J.W. Hutchinson: J. Mech. Phys. Solids, 1999, vol. 48, pp. 2467–51210.1016/S0022-5096(00)00019-3 ↗
23. R. Becker, A. Needleman, S. Suresh, V. Tvergaard, A.K. Vasudévan: Acta Metall., 1989, vol. 37, pp. 99–12010.1016/0001-6160(89)90270-8 ↗
24. T. Pardoen, D. Dumont, A. Deschamp, Y. Brechet: J. Mech. Phys. Solids, 2003, vol. 51, pp. 637–6510.1016/S0022-5096(02)00102-3 ↗
25. F.A. McClintock: J. Appl. Mech., 1968, vol. 35, pp. 363–7110.1115/1.3601204 ↗
26. J.R. Rice, D.M. Tracey: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201–1710.1016/0022-5096(69)90033-7 ↗
27. A.C. Mackenzie, J.W. Hancock, D.K. Brown: Eng. Fract. Mech., 1977, vol. 9, pp. 167–8810.1016/0013-7944(77)90062-5 ↗
28. M.H. Porch, H.F. Fischmeister: Eng. Fract. Mech., 1992, vol. 43, pp. 581–8810.1016/0013-7944(92)90200-X ↗
29. S. Jun: Eng. Fract. Mech., 1993, vol. 44, pp. 789–80610.1016/0013-7944(93)90206-8 ↗
30. M.R. Hill, T.L. Panontin: Eng. Fract. Mech., 2002, vol. 69, pp. 2163–221810.1016/S0013-7944(01)00148-5 ↗
31. D.M. Tracey: Eng Fract. Mech., 1971, vol. 3, pp. 301–1510.1016/0013-7944(71)90040-3 ↗
32. G. Perrin, J.-B. Leblond, and J. Devaux: ECF 8-Fracture Behaviour and Design of Materials and Structures, Engineering Materials Advisory Services Ltd., Torino, Italy, Oct. 1–5, 1990, vol. I, pp. 427–32
33. R. Becker: J. Mech. Phys. Solids, 1987, vol. 35, pp. 577–9910.1016/0022-5096(87)90018-4 ↗
34. V. Tvergaard: Adv. Appl. Mech., 1990, vol. 27, pp. 83–14710.1016/S0065-2156(08)70195-9 ↗
35. J. Faleskog, C.F. Shih: Int. J. Fract., 1997, vol. 89, pp. 355–7310.1023/A:1007421420901 ↗
36. Z.H. Li, C. Wang, C.Y. Chen: Int. J. Plast., 2003, vol. 19, pp. 213–3410.1016/S0749-6419(01)00040-7 ↗
37. J. Koplik, A. Needleman: Int. J. Solids Struct., 1988, vol. 24, pp. 835–5310.1016/0020-7683(88)90051-0 ↗
38. ABAQUS, version 6.5, ABAQUS, Inc., Providence, RI, 2004
39. J.-B. Leblond: Mécanique de la rupture fragile et ductile, Lavoisier, Paris, 2003
40. J.W. Hancock, M.J. Cowling: Met. Sci., 1980, vol. 14, pp. 293–30410.1016/0036-9748(80)90347-6 ↗
41. T. Ohira, T. Kishi: Mater. Sci. Eng., 1986, vol. 78, pp. 9–1910.1016/0025-5416(86)90075-3 ↗