Improvement in mechanical properties of dental cast Ti-6Al-7Nb by thermochemical processing
Source abstract
Abstract
Hydrogenation and dehydrogenation, that is, thermochemical processing (THP) and its variation with a post-heat treatment (THPH), are investigated in order to improve the balance of strength, elongation, and fatigue strength of cast Ti-6Al-7Nb and Ti-6Al-4V for dental applications. Microstructures of both cast alloys change from coarse Widmanstatten α structure to super fine α structure with an average diameter of 3 µm by conducting THP or THPH. Tensile strength and fatigue limit of cast Ti-6Al-7Nb and Ti-6Al-4V increase by around 10 and 40 pct, respectively, as compared with those of both as-cast alloys. The balance of strength and ductility of cast Ti-6Al-7Nb is improved by conducting THPH as compared with the case where THP is conducted. This improvement is due to the plastic deformability of unstable β phase because the lattice constant of β phase in each alloy conducted with THPH is much greater than that of each as-cast alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. S.A. Brown and J.E. Lemons: Medical Applications of Titanium and Its Alloys, ASTMSTP 1272, ASTM, Philadelphia, PA, 1996, pp. ix-xii.
2. R. Boyer, G. Welsch, and E.W. Collings: Materials Handbook: Titanium Alloys, ASM, Materials Park, OH, 1994, pp. 483–636.
3. Standard Specification for Wrought Titanium 6Al 4V ELI Alloy for Surgical Implants, ASTM Designation F136-82, ASTM, Philadelphia, PA, 1994, pp. 19–20.
4. Y. Okazaki: J. Jpn. Inst. Met., 1997, vol. 36, pp. 966–68.
5. Standard Specification for Wrought Titanium 6Al 4V ELI Alloy for Surgical Implants, ASTM Designation F1295-92, ASTM, Philadelphia, PA, 1994, pp. 687–89.
6. H. Doi: J. Jpn. Soc. Dental Mater. Devices, 1999, vol. 18, pp. 368–74.
7. H. Doi, T.J. Wang, T. Nakano, E. Kobayashi, T. Yoneyama, and H. Hamanaka: J. Jpn. Soc. Dental Mater. Devices, 1997, vol. 16, pp. 182–86.
8. G. Wegmann, J. Albrecht, G. Lütjering, K.D. Folkers, and C. Liesner: Z. Metallkd., 1997, vol. 88, pp. 764–73.
9. W.R. Kerr: Metall. Trans. A, 1985, vol. 16A, pp. 1077–87.10.1007/BF02811677 ↗
10. E. Kobayashi, T.J. Wang, H. Doi, T. Yoneyama, and H. Hamanaka: J. Mater. Soc.: Mater. Med., 1998, vol. 9, pp. 567–74.10.1023/A:1008909408948 ↗
11. E. Kobayashi, H. Doi, M. Takahashi, T. Nakano, T. Yoneyama, and H. Hamanaka: J. Jpn. Soc. Dental Mater. Devices, 1995, vol. 14, pp. 406–13.
12. O.N. Senkov, J.J. Jones, and F.H. Froes: JOM, 1996, pp. 42–47.10.1007/BF03222997 ↗
13. J. Gu and D. Hardie: Mater. Sci. Technol., 1996, vol. 12, pp. 802–07.10.1179/mst.1996.12.10.802 ↗
14. A. Akmoulin, M. Niinomi, and T. Kobayashi: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1655–66.10.1007/BF02668531 ↗
15. M. Niinomi, B. Gong, T. Kobayashi, Y. Ohyabu, and O. Toriyama: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1141–52.10.1007/BF02670611 ↗
16. M. Niinomi, T. Kobayashi, I. Inagaki, and A.W. Thompson: Metall. Trans. A, 1990, vol. 21A, pp. 1733–44.10.1007/BF02672590 ↗
17. M. Niinomi: Mater. Sci. Eng. A, 1998, vol. A243, pp. 231–36.10.1016/S0921-5093(97)00806-X ↗
18. T. Akahori, M. Niinomi, K. Fukunaga, and I. Inagaki: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1949–58.10.1007/s11661-000-0222-z ↗