journal article·2003-07

The shrinkage of grain-boundary voids under pressure

Hua Wang, Zhonghua Li

Publisher page

Abstract

The shrinkage rate of the grain-boundary void under pressure is developed. The rate process is controlled by grain-boundary diffusion under the combined action of void surface energy, grain-boundary energy, and elastic energy stored in the solid. A critical load parameter that controls the void shape is introduced, below which the void will be in an equilibrium state and will be stable during shrinking. The equilibrium shape of the shrinking grain-boundary void is obtained. Then, an explicit expression for the shrinkage rate of the grain boundary void is derived as a function of the applied pressure, void shape parameter, and relevant material parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. T.K. Gupta: J. Am. Ceram. Soc., 1978, vol. 61, pp. 191–95.10.1111/j.1151-2916.1978.tb09276.x ↗
2. J. Rodel and A.M. Glaeser: J. Am. Ceram. Soc., 1990, vol. 73, pp. 592–601.10.1111/j.1151-2916.1990.tb06558.x ↗
3. F. Yao, K. Ando, and M.C. Chu: J. Mater. Sci. Lett., 2000, vol. 19, pp. 1081–83.10.1023/A:1006715825737 ↗
4. M.F. Ashby: Acta Metall., 1974, vol. 22, pp. 275–89.10.1016/0001-6160(74)90167-9 ↗
5. W.D. Kingery and M. Berg: J. Appl. Phys., 1955, vol. 26, pp. 1205–12.10.1063/1.1721874 ↗
6. B. Derby and E.R. Wallach: Met. Sci., 1982, vol. 16, pp. 49–56.10.1016/0036-9748(82)90401-X ↗
7. Z.X. Guo and N. Ridley: Mater. Sci. Technol., 1987, vol. 3, pp. 945–53.10.1179/mst.1987.3.11.945 ↗
8. A. Hill and E.R. Wallach: Acta Metall., 1989, vol. 37, pp. 2425–37.10.1016/0001-6160(89)90040-0 ↗
9. H.H. Yu and Z. Suo: J. Mech. Phys. Solids, 1999, vol. 47, pp. 1131–55.10.1016/S0022-5096(98)00093-3 ↗
10. J.K. Lee and T.H. Courtney: Metall. Trans. A, 1989, vol. 20A, pp. 1385–94.10.1007/BF02665496 ↗
11. Q. Ma: Acta Metall., 1998, vol. 46, pp. 1669–81.
12. P.Z. Huang, Z.H. Li, and J. Sun: Modeling Simul. Mater. Sci. Eng., 2001, vol. 9, pp. 193–206.10.1088/0965-0393/9/3/306 ↗
13. P.Z. Huang, Z.H. Li, and J. Sun: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1117–24.10.1007/s11661-002-0213-3 ↗
14. J.R. Rice and T. Chuang: J. Am. Ceram. Soc., 1981, vol. 64, pp. 46–53.10.1111/j.1151-2916.1981.tb09557.x ↗
15. M.V. Speight and W. Beere: Met. Sci., 1975, vol. 9, pp. 190–91.10.1016/0036-9748(75)90366-X ↗
16. Y. Takahashi and K. Inoue: Mater. Sci. Technol., 1992, vol. 8, pp. 953–64.10.1179/mst.1992.8.11.953 ↗
17. E. Arzt, M.F. Ashby, and K.E. Easterling: Metall. Trans. A, 1983, vol. 14A, pp. 211–21.10.1007/BF02651618 ↗
18. Y. Takahashi, F. Ueno, and K. Nishiguchi: Acta Metall., 1988, vol. 36 (11), pp. 3007–18.10.1016/0001-6160(88)90183-6 ↗
19. J.W. Hancock: Met. Sci., 1976, vol. 10, pp. 319–25.10.1016/0036-9748(76)90084-3 ↗
20. T. Chuang, K.I. Kagawa, J.R. Rice, and L.B. Sills: Acta Metall., 1979, vol. 27, pp. 265–84.10.1016/0001-6160(79)90021-X ↗
21. D. Hull and D.E. Rimmer: Phil. Mag., 1959, vol. 4, pp. 673–87.10.1080/14786435908243264 ↗
22. W.B. Beere and G.W. Greenwood: Met. Sci., 1971, vol. 5, pp. 107–13.10.1179/030634571790439757 ↗
23. Y. Takahashi, K. Takahashi, and K. Nishiguchi: Acta Metall. Mater., 1991, vol. 39 (12), pp. 3199–216.10.1016/0956-7151(91)90055-6 ↗
24. Z. Suo and W. Wang: J. Appl. Phys., 1994, vol. 76 (6), pp. 3410–21.10.1063/1.357471 ↗
25. W. Beere and M.V. Speight: Met. Sci., 1978, vol. 12, pp. 172–76.10.1016/0036-9748(78)90294-6 ↗
26. A. Gittins: Acta Metall., 1968, vol. 16, pp. 517–22.10.1016/0001-6160(68)90126-0 ↗
27. L. Martinez and W.D. Nix: Metall. Trans. A, 1982, vol. 13A, pp. 427–37.10.1007/BF02643351 ↗
28. R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653–65.10.1016/0001-6160(75)90047-4 ↗
29. H. England: Complex Variable Methods in Elasticity, Wiley, London, 1971.