journal article·2003-05

Finite-element analysis of effects of the laser-processed bimaterial component size on stresses and distortion

K. Dai, L. Shaw

Publisher page

Abstract

Processing of bimaterial parts via a moving laser beam has been investigated using three-dimensional (3D) finite-element modeling. Effects of the size of parts on the temperature distribution, thermal transient stresses, residual stresses, and distortion have been evaluated. The result indicates that the size of the part to be processed has strong influence on the transient temperature, transient stresses, residual stresses, and distortion of the part. Distortion is small when the size of the part is small and can be predicted from the thermal-expansion mismatch between the two materials. However, when the size of the part becomes large, both distortion and residual stresses increase. Furthermore, both distortion and residual stresses, in this case, cannot be predicted based on the thermal-expansion mismatch alone. The distortion, in this case, is mainly determined by the asymmetrical plastic deformation driven by transient thermal stresses, while residual stresses are dictated by the thermal-expansion mismatch and the temperature gradient of the part before and during cooling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Laser Material Processing Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. J.J. Beaman, J.W. Barlow, D.L. Bourell, R.H. Crawford, H.L. Marcus, and K.P. McAlea: Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Boston, MA, 1997.10.1007/978-1-4615-6327-3 ↗
2. L.-C. Sun and L. Shaw: Metall. Mater. Trans., 1999, 30A, pp. 2549–51.10.1007/s11661-999-0264-9 ↗
3. J.E. Crocker, S. Harrison, L.-C. Sun, L. Shaw, and H. Marcus: JOM, 1998, vol. 50, pp. 21–23.10.1007/s11837-998-0300-z ↗
4. K.J. Jakubenas, J.E. Crocker, S. Harrison, L.-C. Sun, L. Shaw, and H. Marcus: Nav. Res. Rev., 1998, vol. L (3), pp. 51–57.
5. X. Li, J. Crocker, E. Geiss, L. Shaw, H. Marcus, and T. Cameron: Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 159–67.
6. R.K. Chin, J.L. Beuth, and C.H. Amon: Mech. Mater., 1996, vol. 24, pp. 257–71.10.1016/S0167-6636(96)00037-3 ↗
7. C.H. Amon, J.L. Beuth, R. Merz, F.B. Prinz, and L.E. Weiss: J. Manufact. Sci. Eng., 1998, vol. 120 (3), pp. 656–65.10.1115/1.2830171 ↗
8. R. Ong, J.L. Beuth, and L.E. Weiss: in Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 209–18.
9. A. Vasinonta, J.L. Beuth, and M.L. Griffith: Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 200–08.
10. M. Kandis and T.L. Bergman: J. Manufact. Sci. Eng., 2000, vol. 122 (3), pp. 439–44.10.1115/1.1286558 ↗
11. J. Steinberger, J. Shen, K. Manetsberger, and J. Muellers: Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 377–85.
12. Y. Zhang and A. Faghri: Int. J. Heat Mass Transfer, 1999, vol. 42, pp. 775–88.10.1016/S0017-9310(98)00231-2 ↗
13. T.H.C. Childs, C. Hauser, C.M. Taylor, and A.E. Tontowi: Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 100–09.
14. G. Bugeda, M. Cervera, and G. Lombera: Rapid Prototyping J., 1999, vol. 5, pp. 21–26.10.1108/13552549910251846 ↗
15. K. Dai, P. Klemens, and L. Shaw: Proc. 11th Annual SFF Symp., D.L. Bourell, J.J. Beaman, R.H. Crawford, H.L. Marcus, and J.W. Barlow, eds., The University of Texas, Austin, TX, 2000, pp. 386–92.
16. K. Dai and L. Shaw, Acta Mater., 2001, vol. 49, pp. 4171–81.10.1016/S1359-6454(01)00312-3 ↗
17. Y.S. Touloukian and D.P. DeWitt: Thermophysical Properties of Mater, vol. 7, Thermal Radiative Properties: Metallic Elements and Alloys, IFI/Plenum, New York, NY, 1970.10.1007/978-1-4757-6833-6 ↗
18. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, Warrendale, PA, 1994.
19. Taylor Lyman: Metals Handbook, 8th ed., vol. 1, Properties and Selection of Metals, ASM, Metals Park, OH, 1961.
20. Y.S. Touloukian, R.W. Powell, C.Y. Ho, and P.G. Klemens: Thermophysical Properties of Matter, vol. 1, Thermal Conductivity: Metallic Elements and Alloys, IFI/Plenum, New York, NY, 1970.
21. Y.S. Touloukian and E.H. Buyco: Thermophysical Properties of Matter, vol. 4, Specific Heat: Metallic Elements and Alloys, IFI/Plenum, New York, NY, 1970.
22. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and P.D. Deai: Thermophysical Properties of Matter, vol. 12, Thermal Expansion: Metallic Elements and Alloys, IFI/Plenum, New York, NY, 1975.
23. O. Kubaschewski, C.B. Alcock, and P.J. Spencer: Materials Thermochemistry, 6th ed., Pergamon Press, Oxford, England, 1993.
24. Y.S. Touloukian and D.P. DeWitt: Thermophysical Properties of Matter, vol. 8, Thermal Radiative Properties: Nonmetallic Solids, IFI/Plenum, New York, NY, 1972.
25. Y.S. Touloukian, R.W. Powell, C.Y. Ho, and P.G. Klemens: Thermophysical Properties of Matter, vol. 2, Thermal Conductivity: Nonmetallic Solids, IFI/Plenum, New York, NY, 1970.
26. Y.S. Touloukian and E.H. Buyco: Thermophysical Properties of Matter, vol. 5, Specific Heat: Nonmetallic Solids, IFI/Plenum, New York, NY, 1970.
27. Y.S. Touloukian and C.Y. Ho: Thermophysical Properties of Matter, vol. 12, Thermal Expansion: Nonmetallic Solids, IFI/Plenum, New York, NY, 1970.
28. S.J. Schneider: Engineered Materials Handbook, vol. 4, Ceramics and Glasses, ASM INTERNATIONAL, Materials Park, OH, 1991.
29. J.R. Mackert, M.B. Butts, R. Morena, and C.W. Fairhurst: J. Am. Ceram. Soc., 1986, volume 69, pp. C-69–C-72.10.1111/j.1151-2916.1986.tb04754.x ↗
30. ANSYS User’s Manual, Swanson Analysis Systems, Inc., Houston, PA, 1992, vol. I–VI.
31. S.W. Churchill: Heat Exchanger Design Handbook, Hemisphere Publishing Corp., New York, NY, 1983.
32. ANSYS Theory Reference, Release 5.6, Peter Kohnke, (ed.), ANSYS Inc., Canonsburg, PA, 1999.
33. E.P. Unksov, W. Johnson, and V.L. Kolmogorov: Theory of Plastic Deformation of Metals, Mashinostroyenie Press, Moscow, Russia, 1982.