journal article·2003-10

Effects of ternary additions on the thermoelastic martensitic transformation of NiAl

S. H. Kim, D. M. Wee, M. H. Oh

Publisher page

Abstract

Nickel-rich β-NiAl alloys, which are potential materials for high-temperature shape-memory alloys, show a thermoelastic martensitic transformation, which produces their shape memory effect. However, the transformation to Ni5Al3 phase during heating of NiAl martensite can interrupt the reversible martensitic transformation; consequently, the shape memory effect in NiAl martensite might not appear after heating. The phase transformation process in binary Ni-(34 to 37)Al martensite was investigated by differential thermal analysis (DTA) method, and we found that the condition of reversible martensitic transformation was not the β → Ni5Al3 transformation, but rather the M → Ni5Al3 transformation occurring at 250 °C to 300 °C. Therefore, the transformation temperature of M → Ni5Al3 determined the highest operating temperature for the shape memory effect. For verifying the critical temperature, the phase transformation process was investigated for eight ternary Ni-33Al-X alloys (X=Cu, Co, Fe, Mn, Cr, Ti, Si, and Nb). Only Ti, Si, and Nb additions were found to be effective in dropping the M s temperature, and they facilitated the shape memory effect in Ni-33Al-X alloys. In particular, the addition of Si and Nb raised the transformation temperature of M → Ni5Al3, a potentially beneficial effect for shape memory at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. S. Rosen and J.A. Goebel: Trans. TMS-AIME, 1968, vol. 242, pp. 722–27.
2. K. Enami, S. Nenno, and K. Shimizu: Mater. Trans. JIM, 1973, vol. 14, pp. 161–65.10.2320/matertrans1960.14.161 ↗
3. K. Enami and S. Nenno: Metall. Trans., 1971, vol. 2, pp. 1487–90.10.1007/BF02913386 ↗
4. C.M. Wayman and K. Shimizu: Met. Sci. J., 1972, vol. 6, pp. 175–81.10.1016/0036-9748(72)90272-4 ↗
5. J.L. Smialek and R.F. Hehemann: Metall. Trans., 1973, vol. 4, pp. 1571–75.10.1007/BF02668010 ↗
6. S. Chakravorty and C.M. Wayman: Metall. Trans. A, 1976, vol. 7A, pp. 555–68.10.1007/BF02643970 ↗
7. Y.K. Au and C.M. Wayman: Scripta Metall., 1972, vol. 6, pp. 1209–14.10.1016/0036-9748(72)90233-5 ↗
8. Intermetallic Compounds Vol. 2—Practice, J.H. Westbrook and R.L. Fleischer, eds. John Wiley & Sons Ltd., Chichester, United Kingdom, 1995, pp. 529–58.
9. Y.D. Kim and C.M. Wayman: Scripta Metall., 1990, vol. 24, pp. 245–50.10.1016/0956-716X(90)90250-K ↗
10. P.S. Khadkikar and K. Vedula: J. Mater. Res., 1987, vol. 2, pp. 163–71.10.1557/JMR.1987.0163 ↗
11. I.M. Robertson and C.M. Wayman: Metallography, 1984, vol. 17, pp. 43–53.10.1016/0026-0800(84)90004-1 ↗
12. K. Enami and S. Nenno: Mater. Trans. JIM, 1978, vol. 19, pp. 571–80.10.2320/matertrans1960.19.571 ↗
13. T. Chraska, J. Lasek, and P. Chraska: Mater. Sci. Eng. A, 1998, vol. A244, pp. 263–72.10.1016/S0921-5093(97)00647-3 ↗
14. K. Ishida, R. Kainuma, N. Ueno, and T. Nishizawa: Metall. Trans. A, 1991, vol. 22A, pp. 441–46.10.1007/BF02656811 ↗
15. S.H. Kim, M.C. Kim, J.H. Lee, M.H. Oh, and D.M. Wee: Mater. Sci. Eng. A, 2002, vol. 329, pp. 668–74.10.1016/S0921-5093(01)01603-3 ↗
16. R. Kainuma, K. Ishida, and T. Nishizawa: Metall. Trans. A, 1992, vol. 23A, pp. 1147–53.10.1007/BF02665046 ↗
17. E.P. George, C.T. Liu, J.A. Horton, C.J. Sparks, M. Kao, H. Kunsmann, and T. King: Mater. Characterization, 1997, vol. 39, pp. 665–86.10.1016/S1044-5803(97)00149-6 ↗
18. N. Ono, A. Tsukahara, R. Kainuma, and K. Ishida: Mater. Sci. Eng. A, 1999, vols. A273–A275, pp. 420–24.10.1016/S0921-5093(99)00310-X ↗
19. R. Kainuma, S. Imano, H. Ohtani, and K. Ishida: Intermetallics, 1996, vol. 4, pp. 37–45.10.1016/0966-9795(95)00016-R ↗
20. I.M. Robertson and C.M. Wayman: Phil. Mag. A, 1983, vol. 48, pp. 443–67.10.1080/01418618308234903 ↗
21. J.H. Yang and C.M. Wayman: Mater. Sci. Eng. A, 1993, vol. A160, pp. 241–49.10.1016/0921-5093(93)90453-L ↗
22. J.H. Yang and C.M. Wayman: Intermetallics, 1994, vol. 2, pp. 111–19.10.1016/0966-9795(94)90005-1 ↗
23. P.S. Khadkikar, I.E. Locci, K. Vedula, and G.M. Michal: Metall. Trans A, 1993, vol. 24A, pp. 83–94.10.1007/BF02669606 ↗
24. C.Y. Xie and J.S. Wu: Mater. Design, 2000, vol. 21, pp. 529–32.10.1016/S0261-3069(00)00016-9 ↗
25. C.Y. Xie and J.S. Wu: Intermetallics, 2000, vol. 8, pp. 77–80.10.1016/S0966-9795(99)00075-8 ↗
26. R. Kainuma, H. Ohtani, and K. Ishida: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2445–53.10.1007/BF02652338 ↗
27. K.K. Jee, P.L. Potapov, S.Y. Song, and M.C. Shin: Scripta Mater., 1997, vol. 36, pp. 207–12.10.1016/S1359-6462(96)00363-6 ↗
28. S. Ochiai, Y. Oya, and T. Suzuki: Acta Metall., 1984, vol. 32, pp. 289–98.10.1016/0001-6160(84)90057-9 ↗
29. R.W. Guard and J.H. Westbrook: Trans. TMS-AIME, 1959, vol. 215, pp. 807–14.