Identification of rolling-sliding damage mechanisms in porous alloys
Source abstract
Abstract
Lubricated rolling-sliding damage in a relatively soft Fe-0.6 pct C alloy and a relatively hard carbonitrided iron, both produced by powder metallurgy, has been investigated. Damage mechanisms were controlled by large-scale as well as small-scale plastic deformations. A large-scale, bulk plastic deformation process produced surface densification in the Fe-0.6 pct C alloy. Formation of surface cracks by asperity-scale plastic shearing was also observed in both materials. Small-scale plastic deformation processes, restricted to the pore edges, gave rise to the formation of fatigue microcracks at the boundary between the densified and undensified region in the Fe-0.6 pct C alloy. A similar effect was found at a depth of between 550 and 1000 µm in the carbonitrided material. Moreover, in the Fe-0.6 pct C alloy, these plastic deformations also triggered the formation and propagation of macrocracks, which produced macroscopic damage by spalling. The damage mechanisms due to small-scale plastic deformations were explained on the basis of a local approach model, able to account for the influence of pores on the mechanical behavior of the materials. However, this approach could not explain the microcracks, which were found at the surface pores in the carbonitrided material. Their formation was ascribed to the interplay between the surface tensile (friction) stresses and the low matrix toughness of the material near the surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. K.H. Zum Gahr: Microstructure and Wear of Materials, Tribology Series 10, Elsevier, Amsterdam, 1997.
2. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117–23.10.1007/BF02642422 ↗
3. A.M. Kumar, G.T. Hahn, and C.A. Rubin: Metall. Trans. A, 1993, vol. 24A, pp. 351–59.10.1007/BF02657322 ↗
4. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986.
5. H.A. Spikes, A.V. Olver, and P.B. Macpherson: Wear, 1986, vol. 112, pp. 121–44.10.1016/0043-1648(86)90236-X ↗
6. P. Clayton and X. Su: Wear, 1996, vol. 100, pp. 63–73.10.1016/S0043-1648(96)07250-X ↗
7. F.J. Esper and C.M. Sonsino: Fatigue Design for PM Components, European Powder Metallurgy Association, Shrewsbury, England, 1994.
8. W.A. Spitzig, R.E. Smelser, and O. Richmond: Acta Metall., 1988, vol. 36, pp. 1201–11.10.1016/0001-6160(88)90273-8 ↗
9. G.F. Bocchini: Int. J. Powder Metall., 1986, vol. 22, pp. 185–202.
10. G. Straffelini, V. Fontanari, and A. Molinari: Mater. Sci. Eng. A, 1999. vol. 260A, pp. 197–202.10.1016/S0921-5093(98)00960-5 ↗
11. J. Holmes and R.A. Queeney: Powder Metall., 1985, vol. 28, pp. 231–35.10.1179/pom.1985.28.4.231 ↗
12. B. Cotterell, S.Q. He, and Y.W. Mai: Acta Metall. Mater., 1994, vol. 42, pp. 99–104.10.1016/0956-7151(94)90051-5 ↗
13. P. Franklin and B.L. Davies: Powder Metall., 1978, vol. 1, pp. 7–12.10.1179/pom.1978.21.1.7 ↗
14. P.D. Nurthen, P.R. Brewin, Y. Davis, and J.A. Whithead: Adv. Powder Metall. Particulate Mater., 1992, vol. 6, pp. 265–79.
15. K. Lipp, C.M. Sonsino, D. Pohl, and W. Brandt: Proc. “PM ’94”, Paris, June 6–9, 1994, SFMMA and EPMA, Les Ulis Cedex, France, pp. 831–34.
16. T. Prucher and H.I. Sanderow: Adv. Powder Metall. Particulate Mater., 1994, vol. 2, pp. 99–111.
17. R. Gnanamoorty and K. Gopinath: Adv. Powder Metall. Particulate Mater., 1992, vol. 6, pp. 237–49.
18. G. Hoffman, K. Lipp, K. Michaelis, C.M. Sonsino, and J.A. Rice: Int. J. Powder Metall., 1999, vol. 35, pp. 35–44.
19. H. O’Neill: The Hardness of Metals and Its Measurement, Chapman and Hall, New York, NY, 1934.
20. T. Bell and Y. Sun: Surf. Eng., 1990, vol. 6, pp. 133–42.10.1179/sur.1990.6.2.133 ↗
21. J.O. Smith and C.K. Liu: J. Appl. Mech., 1953, vol. 20, pp. 157–66.10.1115/1.4010643 ↗
22. A. Salak, V. Miskovic, E. Dudrova, and E. Rudnayova: Powder Metall. Int., 1974, vol. 6, pp. 128–36.
23. T.J. Griffiths and A. Ghanizadeh: Powder Metall., 1986, vol. 29, pp. 129–33.10.1179/pom.1986.29.2.129 ↗
24. S. Way: J. Appl. Mech., 1934, pp. 49–58.
25. J.A. Williams, I.N. Dyson, and A. Kapoor: J. Mater. Res., 1999, vol. 14, pp. 1548–59.10.1557/JMR.1999.0208 ↗
26. D. Nelias, M.L. Dumont, F. Couhier, G. Dudragne, and L. Flamand: ASME J. Tribol., 1998, vol. 120, pp. 184–90.10.1115/1.2834407 ↗
27. D. Pohl: Powder Met. Int., 1969, vol. 1, pp. 26–28.
28. B. Kibicky: Powder Metall., 1995, vol. 38, pp. 295–98.10.1179/pom.1995.38.4.295 ↗
29. Y. Ding, R. Jones, and B.T. Kuhnell: Wear, 1996, pp. 197–205.10.1016/0043-1648(96)06939-6 ↗
30. S. Carabajar, C. Verdu, and R. Fougeres: Mater. Sci. Eng. A, 1997, vol. 232A, pp. 80–87.10.1016/S0921-5093(97)00100-7 ↗
31. G. Straffelini, A. Molinari, and H. Danninger: Mater. Sci. Eng. A, 1999, vol. 272A, pp. 300–09.10.1016/S0921-5093(99)00491-8 ↗
32. N.A. Fleck, K.J. Kang, and M.F. Ashby: Acta Metall. Mater., 1994, vol. 42, pp. 365–81.10.1016/0956-7151(94)90493-6 ↗
33. M.F. Ashby: Materials Selection in Mechanical Design, Pergamon Press, Oxford, United Kingdom, 1993.
34. H. Kong and M.F. Ashby: Acta Metall. Mater., 1992, vol. 40, pp. 2907–20.10.1016/0956-7151(92)90455-N ↗