journal article·2004-07

Effect of the presence of alloying elements in interstitial-free and low-carbon steels on their surface composition after annealing in reducing atmospheres (dew point=−30 °C)

S. Feliu, M. L. Pérez-Revenga

Publisher page

Abstract

The X-ray photoelectron spectroscopy (XPS) method is used to study the outer surfaces of interstitial-free (IF) and low-carbon (LC) steels with different alloying element contents (P, Ti, Nb, and Mn) after annealing at temperatures of 805 °C and 705 °C, respectively, for 40 seconds in reducing atmospheres (dew point=−30 °C). The work discussed seeks to establish possible relationships between the bulk composition of the IF and LC steels and the contents of segregated alloying element observed by XPS on the surface of the annealed steels, as well as to establish the influence of the presence of a thin iron oxide film on the steel surface on the segregation and oxidation of the alloying elements. Despite the low Mn and Si bulk steel contents and the shortness of the annealing cycle, considerable enrichment of these elements on the surface is seen, mainly as manganese and silicon oxides. The formation of a MnO layer on the annealed steel surface seems to be related to the reduction of iron oxides and the increase in the metallic Fe content. Despite its low content in LC steels, carbon also seems to diffuse towards the annealed steel surface to reduce iron oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
2. H.J. Grabke, V. Leroy, and H. Viefhaus: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 95–113.10.2355/isijinternational.35.95 ↗
3. A.R. Marder: Progr. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
4. L. Bordignon: iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 168–71.10.2355/isijinternational.41.168 ↗
5. C.E. Jordan and A.R. Marder: Metall. Trans. B, 1998, vol. 29B, pp. 479–84.10.1007/s11663-998-0127-6 ↗
6. V. Rangarajan, R. Toncheff, and L.L. Franks: Metall. Trans. A, 1998, vol. 29A, pp. 2707–15.10.1007/s11661-998-0311-y ↗
7. Z. Zhang, Q. Lin, and Z. Yu: Mater. Sci. Eng., 2000, vol. A291, pp. 22–26.10.1016/S0921-5093(00)00977-1 ↗
8. M. Lamberigts and J.P. Servais: Appl. Surf. Sci., 1999, vols. 144–145, pp. 334–38.10.1016/S0169-4332(98)00822-8 ↗
9. M. Lamberigts and J.P. Servais: Surf. Interface Anal., 2000, vol. 30, pp. 327–32.10.1002/1096-9918(200008)30:1<327::AID-SIA761>3.0.CO;2-D ↗
10. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Surf. Interface Anal., 2002, vol. 33, pp. 322–29.10.1002/sia.1198 ↗
11. I. Olejford, W. Leijon, and U. Jevelstam: Appl. Surf. Sci., 1980, vol. 6, pp. 241–55.10.1016/0378-5963(80)90015-X ↗
12. I. Hertveldt, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1225–32.10.1007/s11661-000-0118-y ↗
13. I. Svedung and N.G. Vannerberg: Corr. Sci., 1974, vol. 14, pp. 391–99.10.1016/S0010-938X(74)80032-6 ↗
14. P.T. Moseley, G. Tappin, and L.C. Riviere: Corr. Sci., 1982, vol. 22, pp. 69–86.10.1016/0010-938X(82)90070-1 ↗
15. A. Atkinson: Corr. Sci., 1982, vol. 22, pp. 87–102.10.1016/0010-938X(82)90071-3 ↗
16. M. Fukumoto, S. Maeda, S. Hayashi, and T. Narita: Oxid. Met., 2001, vol. 55, pp. 401–22.10.1023/A:1010353729663 ↗
17. H. De Rugy and H. Viefhaus: Surf. Sci., 1986, vol. 173, pp. 418–38.10.1016/0039-6028(86)90200-1 ↗
18. C.L. Briant: Scripta Metall., 1981, vol. 15, pp. 1013–18.10.1016/0036-9748(81)90245-3 ↗
19. H.J. Grabke, K. Henesen, R. Moller, and W. Wei: Scripta Metall., 1987, vol. 21, pp. 1329–34.10.1016/0036-9748(87)90108-6 ↗
20. R.D.K. Misra: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1275–79.10.1023/A:1016515405117 ↗
21. W. Arabczyk, H.J. Mussig, and F. Storbeck Surf. Sci., 1991, vols. 251–252, pp. 804–08.10.1016/0039-6028(91)91102-4 ↗
22. W. Arabczyk, T. Baumann, F. Storbeck, H.J. Mussig, and A. Meisel: Surf. Sci., 1987, vols. 189–190, pp. 190–98.10.1016/S0039-6028(87)80431-4 ↗
23. B. Egert and G. Panzner: Surf. Sci., 1982, vol. 118, pp. 345–68.10.1016/0039-6028(82)90034-6 ↗
24. A.J. Papworth and D.B. Williams: Scripta Mater., 2000, vol. 42, pp. 1107–12.10.1016/S1359-6462(00)00335-3 ↗
25. G. Luckman, L.R. Adler, and W.R. Graham: Surf. Sci., 1982, vol. 121, pp. 61–84.10.1016/0039-6028(82)90236-9 ↗
26. G. Luckman, R.A. Didio, and W.R. Graham: Metall. Trans. A, 1981, vol. 12A, pp. 253–59.10.1007/BF02655198 ↗
27. K. Hennesen, H. Keller, and H. Viefhaus: Scripta Metall., 1984, vol. 18, pp. 1319–22.10.1016/0036-9748(84)90130-3 ↗
28. J.R. Cowan, H.E. Evans, R.B. Jones, and P. Bowen: Acta Mater., 1998, vol. 46, pp. 6565–74.10.1016/S1359-6454(98)00295-X ↗
29. A.C. Yen, W.R. Graham, and G.R. Belton: Metall. Trans. A, 1978, vol. 9A, pp. 31–34.10.1007/BF02647167 ↗
30. L. Allegra, R.G. Hart, and H.E. Townsend: Metall. Trans. A, 1983, vol. 14A, pp. 401–11.10.1007/BF02644218 ↗
31. C.E. Jordan and A.R. Marder: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2683–94.10.1007/s11661-997-0025-6 ↗
32. C.E. Jordan, R. Zuhr, and A.R. Marder: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2695–703.10.1007/s11661-997-0026-5 ↗
33. C.S. Lin and M. Meshi: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 721–30.10.1007/BF02655180 ↗
34. J. Yoon and S. Jang: Proc. 19th ATS Journées Siderurgique, Paris, 1998.
35. A. Henion, S. Feliu, Jr., F.J. Alonso, J. Vrieze, and W. Warnecke: ECSC Project No. 7210-PR/119, Final Report 2002, Luxembourg, European Communities, 2002.
36. R.M. Hudson, H.E. Biber, E.J. Oles, Jr., and C.J. Warning: Metall. Trans. A, 1977, vol. 8A, pp. 1713–19.10.1007/BF02646874 ↗
37. M.P. Seah: Practical Surface Analysis, 2nd ed., John Wiley & Sons Ltd., Chichester, West Susex, 1990, pp. 311–51.
38. J.E. Castle and J.F. Watts: Ind. Eng. Chem. Prod. Res. Dev., 1985, vol. 24, pp. 361–75.10.1021/i300019a005 ↗
39. C.D. Wagner, L.E. Davis, M.V. Zeller, J.A. Taylor, R.H. Raymond, and L. Gale: Surf. Interface Anal., 1981, vol. 3, pp. 211–25.10.1002/sia.740030506 ↗
40. E. McCafferty, K. Bernett, and J.S. Murday: Corr. Sci., 1988, vol. 28, pp. 559–76.10.1016/0010-938X(88)90024-8 ↗
41. G. Kurbatov, E. Darque-Ceretti, and M. Aucoutier: Surf. Interface Anal., 1993, vol. 20, pp. 402–06.10.1002/sia.740200512 ↗
42. D.R. Cousens, B.J. Wood, J.Q. Wang, and A. Atrens: Surf. Interface Anal., 2000, vol. 29, pp. 23–32.10.1002/(SICI)1096-9918(200001)29:1<23::AID-SIA689>3.0.CO;2-Y ↗
43. P. Graat and M.A.J. Somers: Surf. Interface Anal., 1998, vol. 26, pp. 773–82.10.1002/(SICI)1096-9918(199810)26:11<773::AID-SIA419>3.0.CO;2-# ↗
44. M. Mantel and J.P. Wightman: Surf. Interface Anal., 1994, vol. 21, pp. 595–605.10.1002/sia.740210902 ↗
45. J. Zijp, I. Van Stijn, and M. Roelofsen: Prof. 39th Mechanical Working and Steel Processing Conf., Indianapolis, IN, Oct, 1997, ISS, Warrendale, PA, 1997, pp. 31–35.
46. L. Zhang and T.R. Bensinger: Proc. 3th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’95), Chicago, IL, ISS, Warrendale, PA, 1995, pp. 115–20.
47. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Surf. Interface Anal., 2003, vol. 35, pp. 1004–14.10.1002/sia.1639 ↗
48. V. Di Castro and S. Ciampi: Surf. Sci., 1995, vols. 331–333, pp. 294–99.10.1016/0039-6028(95)00190-5 ↗
49. C. Wagner: Z. Elektrochemie, 1959, Bd 63 (7), pp. 772–90.
50. S. Feliu, Jr. and M.L. Perez-Revenga: unpublished research.