journal article·2003-12

Creep of aluminum-based closed-cell foams

M. Haag, A. Wanner, H. Clemens, P. Zhang, O. Kraft, E. Arzt

Publisher page

Abstract

Metal foams creep when loaded mechanically at high homologous temperatures. We have studied the creep behavior of closed-cell aluminum-based foams with relative densities of 0.092, 0.112, and 0.163. Compressive creep tests were performed at 300 °C at strain rates ranging from 10−9 to 10−4 s−1. Special efforts were made to produce and characterize a bulk reference material exhibiting the same chemical composition. Results show that the foams exhibit a lower creep strength and a higher stress exponent than predicted by the Gibson-Ashby model for regular foams. The possible mechanisms responsible for this deviation are discussed. A semi-empirical rate equation is established which describes the experimental data well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Automotive and Human Injury Biomechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. L.J. Gibson and M.F. Ashby: Cellular Solids: Structure and Properties, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1997.10.1017/CBO9781139878326 ↗
2. Porous and Cellular Materials for Structural Applications, MRS Symposium Proceedings, D.S. Schwartz, D.S. Shih, A.G. Evans, and H.N.G. Wadley, eds., Materials Research Society, Pittsburgh, PA, 1998, vol. 521.
3. M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley: Metal Foams: A Design Guide, Butterworth-Heinemann, Boston, MA, 2000.
4. Cellular Materials and Metal Foaming Technology, Conf. Proc., J. Banhart, M.F. Ashby, and N.A. Fleck, eds., Metall Innovation Technologie (MIT), Bremen, Germany, 2001.
5. E.W. Andrews, L.J. Gibson, and M.F. Ashby: Acta Mater., 1999, vol. 47, pp. 2853–63.10.1016/S1359-6454(99)00150-0 ↗
6. E.W. Andrews, J.S. Huang and L.J. Gibson: Acta Mater., 1999, vol. 47, pp. 2927–35.10.1016/S1359-6454(99)00161-5 ↗
7. P. Zhang, M. Haag, O. Kraft, A. Wanner, and E. Arzt: Phil. Mag. A, 2002, vol. 82, pp. 2895–2907.10.1080/01418610210162917 ↗
8. S. Akiyama, K. Imagawa, A. Kitahara, S. Nagata, K. Morimoto, T. Nishikawa, and M. Itoh: U.S. Patent No. 4,712,277, 1987.
9. T. Mijoshi, M. Itoh, S. Akiyama, and A. Kitahara: in Cellular Materials and Metal Foaming Technology, Conf. Proc., J. Banhart, M.F. Ashby, and N.A. Fleck, eds., Metall Innovation Technologie (MIT), Bremen, Germany, 1999, pp. 125–32.
10. G. Petzow: Metallographisches, Keramographisches und Plastographisches Ätzen, 2nd ed., Gebr. Bornträger, Berlin, 1994, p. 235 (in German).
11. A.F. Bastawros and A.G. Evans: Adv. Eng. Mater., 2000, vol. 2 (4), pp. 210–14.10.1002/(SICI)1527-2648(200004)2:4<210::AID-ADEM210>3.0.CO;2-Z ↗
12. W. Blum and B. Reppich: in Creep Behaviour of Crystalline Solids, B. Wilshire and R.W. Evans, eds., Prineridge Press, Swansea, United Kingdom, 1985, p. 83.
13. E. Arzt: Res Mechanica, 1991, vol. 31, pp. 399–453.
14. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982, p. 13.