journal article·2000-12

Mechanical behavior and damage kinetics in nodular cast iron: Part II. Hardening and damage

C. Guillemer-Neel, X. Feaugas, M. Clavel

Publisher page

Abstract

The present article examines the tensile behavior of nodular cast iron (NCI) and distinguishes the different parts of the hardening mechanisms and damage processes. In regard to hardening, particular interest is given to the evolution of the effective-stress (Σef) and back-stress (X) components. In particular, the high value of the back stress is explained in terms of different heterogeneity levels. The influence of damage on these two stress components is studied. It is established that damage softens the effective stress and slightly hardens the back stress. Finally, using a modified Gurson-Tvergaard potential that takes into account the kind of hardening, the mechanical behavior (hardening and damage) of the NCI is modeled. The influence of damage on the effective stress is well described.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. M. Jain: Mater. Sci. Eng., 1990, vol. A128, pp. 183–93.10.1016/0921-5093(90)90226-S ↗
2. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, Oxford University Press, London, 1953, p. 111.
3. D. Kuhlmann-Wilsdorf and C. Laird: Mater. Sci. Eng., 1979, vol. 37, pp. 111–20.10.1016/0025-5416(79)90074-0 ↗
4. J. Dickson J. Boutin, and L. Handfield: Mater. Sci. Eng., 1984, vol. 64, pp. L7-L11.10.1016/0025-5416(84)90083-1 ↗
5. H. Mughrabi, K. Herz, and X. Stark: Int. J. Fract., 1981, vol. 17, pp. 193–220.10.1007/BF00053520 ↗
6. T. Magnin J. Driver J. Lepinoux and L.P. Kubin: Rev. Phys. Appl., vol. 19, 467–82 (1984)10.1051/rphysap:01984001907046700 ↗
7. X. Feaugas and M. Clavel: Acta Mater., 1997, vol. 45, pp. 2685–2701.10.1016/S1359-6454(96)00406-5 ↗
8. E. Orowan: Internal Stresses and Fatigue in Metals, Elsevier, Amsterdam, 1959, p. 59.
9. R.J. Asaro: Acta Metall., 1975, vol. 23, pp. 1255–65.10.1016/0001-6160(75)90044-9 ↗
10. J.D. Atkinson, L.M. Brown, and W.M. Stobbs: Phil. Mag., 1974, vol. 30, pp. 1247–80.10.1080/14786437408207280 ↗
11. S. Takeuchi and A.S. Argon: J. Mater. Sci., 1976, vol. 11, pp. 1542–66.10.1007/BF00540888 ↗
12. G.D. Moan and J.D. Embury: Acta Metall., 1979, vol. 27, pp. 903–14.10.1016/0001-6160(79)90125-1 ↗
13. A.L. Helbert, X. Feaugas, and M. Clavel: Acta Metall., 1998, vol. 46, pp. 939–51.
14. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617–32.10.1016/S1359-6454(99)00222-0 ↗
15. M.E. Mear and J.W. Hutchinson: Mech. Mater., 1985, vol. 4, pp. 395–407.10.1016/0167-6636(85)90035-3 ↗
16. J. Lemaitre and J.L. Chaboche: Mécanique des Matéraux Solides, Dunod, Bordas, Paris, 1999.
17. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
18. V. Tvergaard: Int. J. Fract., 1981, vol. 17, pp. 389–407.10.1007/BF00036191 ↗
19. G. Rousselier: Nucl. Eng. Design, 1987, vol. 105, pp. 97–111.10.1016/0029-5493(87)90234-2 ↗
20. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971, vol. 23, pp. 1185–1200 and 1201–33.10.1080/14786437108217405 ↗
21. L.M. Brown and D.R. Clarke: Acta Metall., 1975, vol. 23, pp. 821–30.10.1016/0001-6160(75)90198-4 ↗
22. R.E. Stoltz and R.M. Pelloux: Metall. Trans. A, 1976, vol. 7A, pp. 1295–1306.10.1007/BF02658814 ↗
23. O.B. Pedersen, L.M. Brown, and W.M. Stobbs: Acta Metall., 1981, vol. 29, pp. 1843–50.10.1016/0001-6160(81)90110-3 ↗
24. A. Abel: Mater. Sci. Eng., 1993, vol. A164, pp. 220–25.10.1016/0921-5093(93)90666-3 ↗
25. B. Verhaeghe, F. Louchet, Y. Bréchet, J.P. Massoud, and D. Touzeau: IUTAM Symp. on Micromechanics of Plasticity and Damage on Multiphase Materials, A. Pineau and A. Zaoui, eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1996, pp. 263–70.
26. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–79.10.1016/0001-6160(83)90007-X ↗
27. S.F. Corbin, D.S. Wilkinson, and J.D. Embury: Mater. Sci. Eng., 1996, vol. A207, pp. 1–11.10.1016/0921-5093(95)10028-8 ↗
28. L. Zhonghua and G. Haicheng: Metall. Trans. A, 1990, vol. 21A, pp. 717–24 and 725–32.10.1007/BF02671942 ↗
29. C. Guillemer-Neel: Ph.D. Thesis, Universite de Technologie de Compiegne, Compiegne, 1999.
30. C. Guillemer-Neel, V. Bobet, and M. Clavel: Mater. Sci. Eng., 1999, vol. A272, pp. 431–42.10.1016/S0921-5093(99)00493-1 ↗
31. D.V. Wilson: Acta Metall., 1965, vol. 29, pp. 807–14.10.1016/0001-6160(65)90145-8 ↗
32. X. Feaugas: Mémoire d’Habilitation à Diriger des Recherches, Universite de Technologie de Compiegne, Compiegne, 1999.
33. C. Guillemer-Neel, X. Feaugas, and M. Clavel: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3063–74.10.1007/s11661-000-0085-3 ↗
34. P.J. Wray, O. Richmond, and H.L. Morrison: Metallography, 1983, vol. 16, pp. 39–58.10.1016/0026-0800(83)90043-5 ↗
35. W.A. Spitzig, J.F. Kelly, and O. Richmond: Metallography, 1985, vol. 18, pp. 235–61.10.1016/0026-0800(85)90045-X ↗
36. P. Dierickx: Ph.D. Thesis, INSA Lyon, Lyon, 1996.
37. P. Bastid: Ph.D. Thesis, Ecole Nationale des Mines de Paris, Paris, 1995.
38. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825–37.10.1007/BF02672306 ↗
39. A.S. Argon and J. Im: Metall. Trans. A, 1975, vol. 6A, pp. 839–51.10.1007/BF02672307 ↗
40. F.M. Beremin: Metall. Trans. A, 1981, vol. 12A, pp. 723–31.10.1007/BF02648336 ↗
41. F. Morestin and M. Boivin: Nucl. Eng. Design, 1996, vol. 162, pp. 107–16.10.1016/0029-5493(95)01123-4 ↗
42. J. Friedel: Solid State Physics, Pergamon Press, New York, NY, 1964.
43. O. Hubert, M. Clavel, E. Hug, and I. Guillot: J. Phys. IV, 1999, vol. 9, pp. 207–16.10.1051/jp4:1999921 ↗
44. A.S. Keh and S. Weissmann: in Electron Microscopy and Strength of Crystals, C. Thomas and J. Washburn eds., Interscience, New York, NY, 1963, p. 231.
45. P.B. Hirsch: 5th Int. Congr. of Crystallography, Cambridge, G.M. Rassweiller and W.L. Grube, Elsevier, Amsterdam, 1960, p. 139.
46. F. Louchet: Dislocations et Déformation Plastique, Les Editions de Physique, Yravals, France, 1979, pp. 149–60.
47. H. Mughrabi, K. Herz, and X. Stark: Acta Metall., 1976, vol. 24, pp. 659–68.10.1016/0001-6160(76)90086-9 ↗
48. V. Vitek: Dislocations and Properties of Real Materials, The Institute of Metals, London, 1985, p. 30.
49. Materials Science and Technology, A comprehensive Treatment, vol. 6, Plastic Deformation and Fracture of Materials, R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH, New York, NY, 1993, p. 235.
50. P. Gilormini, C. Licht, and P. Suquet: Arch. Mech., 1988, vol. 40, pp. 43–80.
51. D. Steglich and W. Brocks: Comput. Mater. Sci., 1997, vol. 9, pp. 7–17.10.1016/S0927-0256(97)00053-0 ↗
52. Z.L. Zhang and E. Niemi: Int. J. Fract., 1995, vol. 70, pp. 321–34.10.1007/BF00032450 ↗
53. P. Joly: Ph.D. Thesis, Ecole Nationale des Mines de Paris, Paris, 1992.
54. R. Foerch, J. Besson, G. Cailletaud, and P. Pilvin: Computer Methods Appl. Mech. Eng., 1997, vol. 141, pp. 355–72.10.1016/S0045-7825(96)01111-5 ↗