journal article·2001-11

Thermal-tempering analysis of bulk metallic glass plates using an instant-freezing model

C. C. Aydiner, E. Ü:Ustü:UndaG, J. C. Hanan

Publisher page

Abstract

The viscoelastic nature of bulk metallic glasses (BMGs), their low thermal conductivity, and the fast cooling used in their processing subject them to thermal tempering. This process leads to a residual stress state in which compression on the surface is balanced by tension in the interior. For the first time, we have calculated such stresses in metallic glasses by adapting an analytical instant-freezing model previously developed for silicate glasses. This model has been demonstrated to be reasonably accurate in predicting the final residual stresses, although, due to its very nature, it neglects transient effects. For an infinite plate geometry and employing processing parameters often used for metallic glasses, we predict that significant residual stresses can be generated in these materials during thermal tempering. Preliminary measurements conducted using the layer-removal method yield compressive residual stress values close to model predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
2. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997 vol. 71 (4), pp. 476–78.10.1063/1.119610 ↗
3. H.A. Bruck, T. Christman, A.J. Rosakis, and W.L. Johnson: Scripta Metall., 1994, vol. 30, pp. 429–34.10.1016/0956-716X(94)90598-3 ↗
4. R. Gardon: in Glass Science and Technology, vol. 5: Elasticity and Strength in Glasses, D.R. Uhlmann and N.J. Kreidl, eds., Academic Press, New York, NY, 1980, pp. 146–216.
5. E. Bakke, R. Busch, and W.L. Johnson: Appl. Phys. Lett, 1995, vol. 67 (22), pp. 3260–62.10.1063/1.114891 ↗
6. V.L. Indenbom: Z. Tekh. Fiz., 1954, vol. 24, pp. 925–28.
7. LI. Kitaigorodskii and V.L. Indenbom: Dokl. Akad. Nauk SSSR, 1956, vol. 108, pp. 843–45.
8. G.M. Bartenev: Dokl. Akad. Nauk SSSR, 1948, vol. 60, p. 257.
9. G.M. Bartenev: Z. Tekh. Fiz., 1948, vol. 18, pp. 383–88.
10. G.M. Bartenev: Z. Tekh. Fiz., 1949, vol. 19, pp. 1423–33.
11. B.D. Aggarwala and E. Saibel: Phys. Chem. Glasses, 1961, vol. 2, pp. 137–40.
12. V.L. Indenbom and L.I. Vidro: English Transl.: Sov. Phys. Solid State, 1964, vol. 6, pp. 767–72.
13. E.H. Lee, T.G. Rogers, and T.C. Woo: J. Am. Ceram. Soc, 1965, vol. 48, pp. 480–87.10.1111/j.1151-2916.1965.tb14805.x ↗
14. O.S. Narayanaswamy and R. Gardon: J. Am. Ceram. Soc, 1969, vol. 52, pp. 554–58.10.1111/j.1151-2916.1969.tb09163.x ↗
15. O.S. Narayanaswamy: J. Am. Ceram. Soc., 1971, vol. 54, pp. 491–98.10.1111/j.1151-2916.1971.tb12186.x ↗
16. R.B. Dandliker, R.D. Conner, and W.L. Johnson: J. Mater. Res., 1998, vol. 13 (10), pp. 2896–01.10.1557/JMR.1998.0396 ↗
17. J.P. Holman: Heat Transfer, 6th ed., McGraw-Hill, New York, NY, 1986, p. 13.
18. J.W. Brown and R. Churchill: Fourier Series and Boundary Value Problems, 5th ed., McGraw-Hill, New York, NY, 1993, pp. 194–96.
19. W. Seifert, A. Maschke, and M. Dubiel: Glastech. Ber. Sci. Technol., 1998, vol. 71, pp. 341–51.
20. C.C. Aydiner and E. Ustundag: California Institute of Technology, Pasadena, CA, unpublished research, 2001.
21. R.G. Treuting and W.T. Read: J. Appl. Phys., 1951, vol. 22, pp. 130–34.10.1063/1.1699913 ↗
22. M. Tejedor, J.A. Garcia, J. Carrizo, and L. Elbaile: J. Mater. Sci., 1997, vol. 32, pp. 2337–40.10.1023/A:1018536603243 ↗
23. D.J. Demorest and D.O. Leeser: Proc. SESA, 1951, vol. XI (1), pp. 45–54.
24. D.O. Leeser and R.A. Daane: Proc. SESA, 1954, vol. XII (1), pp. 203–08.
25. Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, ASTM Standard E837-89, ASTM, Philadelphia, PA, 1989.
26. N.J. Rendler and I. Vigness: Exp. Mech., 1966, vol. 6 (12), pp. 577–86.10.1007/BF02326825 ↗
27. A. Niku-Lari, J. Lu, and J.F. Flavenot: Exp. Mech., 1985, vol. 25 (6), pp. 175–85.10.1007/BF02328809 ↗
28. M.T. Flaman and B.H. Manning: Exp. Mech., 1985, vol. 25 (9), pp. 205–07.10.1007/BF02325088 ↗
29. G.S. Schajer: J. Eng. Mater-Tech. ASME, 1988, vol. 110, pp. 338–49.10.1115/1.3226059 ↗
30. W. Cheng, I. Finnie, and Ö. Vardar: J. Eng. Mater-Tech. ASME, 1991, vol. 113, pp. 199–204.10.1115/1.2903392 ↗
31. W. Cheng, I. Finnie, and Ö. Vardar: Eng. Fract. Mech., 1992, vol. 42, pp. 97–107.10.1016/0013-7944(92)90281-I ↗
32. W. Cheng, I. Finnie, M. Gremaud, and M.B. Prime: J. Eng. Mater-Tech. ASME, 1994, vol. 116, pp. 1–7.10.1115/1.2904251 ↗
33. H.J. Schindler: Int. J. Fract, 1995, vol. 74 (2), pp. R23-R30.10.1007/BF00036266 ↗
34. H.J. Schindler, W. Cheng, and I. Finnie: Exp. Mech., 1997, vol. 37 (3), pp. 272–77.10.1007/BF02317418 ↗
35. M.B. Prime: Appl. Mech. Rev., 1999, vol. 52 (2), pp. 75–96.10.1115/1.3098926 ↗