journal article·2001-09

The stability of Nb/Nb5Si3 microlaminates at high temperatures

D. Van Heerden, T. P. Weihs, P. R. Subramanian, T. Foecke, A. J. Gavens

Publisher page

Abstract

The microstructural, phase, and chemical stability of Nb/Nb5Si3 microlaminates was investigated at temperatures ranging from 1200 °C to 1600 °C. Freestanding Nb/Nb5Si3 microlaminates were prepared by sputter deposition and their stability was investigated by annealing either in vacuum or in an Ar atmosphere. The microlaminates were generally structurally stable, with no evidence of layer pinchoff, even after annealing at 1600 °C. However, a small volume fraction (<2 pct) of voids formed in the silicide layers at 1500 °C and 1600 °C, which are attributed either to the Kirkendall diffusion of Si or to the growth of silicide grains. In terms of phase stability, there was no discernible dissolution of the Nb5Si3 layers and no silicide precipitates in the Nb layers following anneals at 1400 °C. Annealing at higher temperatures, though, resulted in the formation of non-equilibrium Nb3Si on the Nb/Nb5Si3 interfaces. This phase is thought to precipitate from the supersaturated Nb-Si solid solution on cooling, and is stabilized by the development of tensile stresses in the Nb layers. The most pervasive observed high-temperature breakdown mechanism was chemical in nature, namely, the loss of Si via sublimation to the environment. The Si loss was partially suppressed either by annealing in a Si-rich atmosphere or by annealing in Ar.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt: JOM, 1996, vol. 48 (1), pp. 39–45.10.1007/BF03221361 ↗
2. B.P. Bewlay, M.R. Jackson, and P.R. Subramanian: JOM, 1999, vol. 51 (4), pp. 32–36.10.1007/s11837-999-0077-8 ↗
3. M.G. Mendiratta and D.M. Dimiduk: Scripta Metall. Mater., 1991, vol. 25, pp. 237–42.10.1016/0956-716X(91)90387-G ↗
4. M.G. Mendiratta, J.J. Lewandowski, and D.M. Dimiduk: Metall. Trans. A, 1991, vol. 22A, pp. 1573–83.10.1007/BF02667370 ↗
5. M. Thirukkonda, B. Cockeram, M. Saqib, L.E. Matson, R. Srinivasan, and I. Weiss: Scripta Metall. Mater., 1992, vol. 27, pp. 711–16.10.1016/0956-716X(92)90493-X ↗
6. M.G. Mendiratta and D.M. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501–04.10.1007/BF02657338 ↗
7. B.P. Bewlay, H.A. Lipsitt, W.J. Reeder, M.R. Jackson, and J.A. Sutcliff: Processing and Fabrication of Advanced Materials II, V. Ravid and T.S. Srivatsan, eds., TMS, Warrendale, PA, 1994, pp. 547–65.
8. G.A. Henshall, M.J. Strum, P.R. Subramanian, and M.G. Mendiratta: High-Temperature Ordered Intermetallic Alloys VI, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1994, vol. 364, pp. 937–42.
9. W. Provancher and A.K. Ghosh: High Temperature Ordered Intermetallic Alloys IV, Materials Research Society Symposia Proceedings, Boston, MA, 1995, Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 1071–76.
10. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–08.10.1007/BF02595629 ↗
11. P.R. Subramanian, M.G. Mendiratta, D.M. Dimiduk, and M.A. Stuck: Mater. Sci. Eng., 1997, vol. A240, pp. 1–13.10.1016/S0921-5093(97)00555-8 ↗
12. J.D. Rigney: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, San Francisco, CA, 1996, Materials Research Society, Pittsburgh, PA, 1996, vol. 434, pp. 227–41.
13. J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43, pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
14. J. Kajuch, J.D. Rigney, and J.J. Lewandowski: Mater. Sci. Eng., 1992, vol. A155, pp. 59–65.10.1016/0921-5093(92)90312-O ↗
15. A.J. Gavens, D. Van Heerden, T. Foecke, and T.P. Weihs: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2959–65.10.1007/s11661-999-0133-6 ↗
16. P.G. Rowe, D.W. Skelly, M. Larsen, J. Heathcote, G.R. Odette, and G. Lucas: Scripta Metall. Mater., 1994, vol. 31, pp. 1487–92.10.1016/0956-716X(94)90061-2 ↗
17. P.G. Rowe, D.W. Skelly, M. Larsen, J. Heathcote, G. Lucas, and G.R. Odette: High Temperature Silicides and Refractory Alloys, Materials Research Society Symposia Proceedings, Boston, MA, 1994, Materials Research Society, Pittsburgh, PA, 1994, vol. 322, pp. 461–72.
18. H. Cao, J.P.A. Lofvander, A.G. Evans, R.G. Rowe, and D.W. Skelly: Mater. Sci. Eng., 1994, vol. A185, pp. 87–95.10.1016/0921-5093(94)90931-8 ↗
19. G.R. Odette, B.L. Chao, J.W. Sheckherd, and G.E. Lucas: Acta Metall. Mater., 1992, vol. 40, pp. 2381–89.10.1016/0956-7151(92)90157-A ↗
20. D. Josell and F. Spaepen: Acta Metall. Mater., 1993, vol. 41, pp. 3017–27.10.1016/0956-7151(93)90116-A ↗
21. L.E. Murr: Interfacial Phenomena in Metal and Alloys, Addison-Wesley, Reading, MA, 1975.
22. W.W. Mullins: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1917–30.10.1007/BF02670663 ↗
23. D. Van Heerden, A.J. Gavens, T. Foecke, and T.P. Weihs: Mater. Sci. Eng. A, 1999, vol. 261, pp. 212–16.10.1016/S0921-5093(98)01068-5 ↗
24. F. Galasso and J. Pyle: Acta Cryst., 1963, vol. 16, pp. 228–29.10.1107/S0365110X63000554 ↗
25. M.E. Schlesinger, H. Okamoto, A.B. Gokhale, and R. Abbaschian: J. Phase Equilibrium, 1993, vol. 14, pp. 502–09.10.1007/BF02671971 ↗
26. Handbook of High Temperature Compounds: Properties, Production, Applications, T.Y. Kosolapova, ed., Hemisphere Publishing Corporation, New York, NY, 1990.
27. Joint Committee of Powder Diffraction Standard (powder diffraction files).
28. C.H. Shang, D. Van Heerden, A.J. Gavens, and T.P. Weihs: Acta Mater., 2000, vol. 48, pp. 3533–43.10.1016/S1359-6454(00)00125-7 ↗
29. Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM, Metals Park, OH, 1986.
30. C.-D. Lien and M.A. Nicolet: J. Vacuum Sci. Technol., 1984, vol. B2 (4), pp. 738–47.10.1116/1.582872 ↗
31. K. Sadananda, C.R. Feng, R. Mitra, and S.C. Deevi: Mater. Sci. Eng., 1999, vol. A261, pp. 223–28.10.1016/S0921-5093(98)01070-3 ↗
32. B.J. Hockey, S.M. Wiederhorn, W. Liu, J.G. Baldoni, and S.T. Buljan: J. Mater. Sci., 1991, vol. 26, pp. 3931–39.10.1007/BF01184994 ↗
33. Z. Zao, J. Stiglich, and T.S. Sudarshan: J. Mater. Eng. Performance, 1999, vol. 8, pp. 291–304.10.1361/105994999770346837 ↗
34. P.R. Subramanian: GE Corporate Research & Development, Schenectady, NY, private communication, 2000.
35. L.C. Chen and F. Spaepen: J. Appl. Phys., 1991, vol. 69, pp. 679–88.10.1063/1.347349 ↗