Effects of preoxidation on the nucleation and growth behavior of chemically vapor-deposited α-Al2O3 on a single-crystal Ni-based superalloy
Source abstract
Abstract
A chemical vapor deposition (CVD) procedure was developed for preparing a high-quality α-Al2O3 coating layer on the surface of a single-crystal Ni-based superalloy using AlCl3, CO2 and H2 as precursors. A critical part of this procedure was a short-time preoxidation step (1 min) with CO2 and H2 in the CVD chamber, prior to introducing the AlCl3 precursor. Without this preoxidation step, extensive whisker formation was observed on the alloy surface. Characterization results showed that the preoxidation step resulted in the formation of a continuous oxide layer (∼50 nm) on the alloy surface. The outer part of this layer (∼20 nm) appeared to contain mixed oxides, whereas the inner part (∼30 nm) mainly consisted of α-Al2O3 grains with θ-Al2O3 as a minor phase. We observed that the nucleation of α-Al2O3 in the preoxidized layer was promoted by (1) rapid heating (10 seconds) of the alloy surface to the temperature region where α-Al2O3 was expected to nucleate; (2) the low oxygen pressure environment of the preoxidation step, which kept the rate of oxidation low; and (3) contamination of the reactor chamber with HfCl4. The preoxidized layer served as an effective diffusion barrier for mitigating the interaction with some of the alloying elements such as Co and Cr with the CVD precursors and eliminating whisker formation on the alloy surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. J.T. DeMasi-Marcin, and D.K. Gupta: Surf. Coating Technol., 1994, vol. 68/69, pp. 1–9.10.1016/0257-8972(94)90129-5 ↗
2. R.V. Hillery et al., National Materials Advisory Board Report, National Academy Press, Washington, DC, 1996.
3. W.Y. Lee, D.P. Stinton, C.C. Berndt, F. Erdogan, Y.D. Lee, and Z. Mutasim: J. Am. Ceram. Soc., 1996, vol. 79, pp. 3003–12.10.1111/j.1151-2916.1996.tb08070.x ↗
4. S.M. Meier, D.M. Nissley, K.D. Sheffler, and T.A. Cruse: Trans. ASME, 1992, vol. 114, pp. 258–63.
5. T.E. Strangman: U.S. Patent No. 4,880,614, 1990.
6. J.H. Sun, E. Chang, C.H. Chao, and M.J. Cheng: Oxid. Met., 1993, vol. 40, pp. 465–81.10.1007/BF00666387 ↗
7. E. Fredriksson and J.-O. Carlsson: J. Chem. Vapor Dep., 1993, pp. 333–417.
8. H. Alltena, C. Colombier, A. Lebl, J. Lindström, and B. Lux: Proc. 4th Eur. Conf. CVD, J. Bloem, G. Verspui, and L.R. Wolff, eds., Eindhoven, The Netherlands, 1983, pp. 428–34.
9. B. Lux, C. Colombier, H. Altena, and K. Stjernberg: Thin Solid Film, 1986, vol. 138 (1), pp. 49–64.10.1016/0040-6090(86)90214-2 ↗
10. J. Müller, M. Schierling, E. Zimmermann, and D. Neuschütz: Surface Coating Technol., 1999, vols. 120–121, pp. 16–21.10.1016/S0257-8972(99)00333-3 ↗
11. Y.-F. Su, M.A. Torzilli, J.D. Meyer, C. Rawn, M.J. Lance, S. Ruppi, and W.Y. Lee: J. Am. Ceram. Soc., 2002, vol. 85 (8), pp. 2089–96.10.1111/j.1151-2916.2002.tb00409.x ↗
12. G.Y. Kim, L.M. He, J.D. Meyer, A. Quintero, and W.Y. Lee: Metall. Mater. Trans. A, in press.
13. G. Gregori, W. Burger, and V. Sergo: Mater. Sci. Eng., 1999, vol. A271, pp. 401–06.10.1016/S0921-5093(99)00383-4 ↗
14. D.R. Clarke, R.J. Christensen, and V.T. Tolpygo: Surf. Coating Technol., 1997, vol. 94–95, pp. 89–93.10.1016/S0257-8972(97)00483-0 ↗
15. G.C. Wood: Oxid. Met., 1970, vol. 2, pp. 11–57.10.1007/BF00603581 ↗
16. G.C. Wood, and F.H. Stott: Mater. Sci. Technol., 1987, vol. 3, pp. 519–30.10.1080/02670836.1987.11782263 ↗
17. H.M. Tawancy: J. Mater. Sci., 1993, vol. 28, pp. 561–68.10.1007/BF00357838 ↗
18. B.H. Kear, F.S. Pettit, D.E. Fornwalt, and L.P. Lemaire: Oxid. Met., 1970, vol. 3, pp. 557–69.10.1007/BF00605003 ↗
19. J.L. Smialek, and R. Gibala: Metall. Trans. A, 1983, vol. 14A, pp. 2143–64.10.1007/BF02662381 ↗
20. I.G. Wright, B.A. Pint, W.Y. Lee, K.B. Alexander, and K. Prüßner: High Temperature Surface Engineering, Institute of Materials, London, 2000, pp. 95–113.
21. Y. Zhang: Ph.D. Dissertation, University of Tennessee, Knoxville, TN, 1999.
22. U. Bardi, A. Atrei, and G. Rovida: Surface Sci., 1992, vol. 268, pp. 87–97.10.1016/0039-6028(92)90952-3 ↗
23. N. Birks, G.H. Meier, and F.S. Pettit: J. Met., 1994, vol. 46 (12), pp. 42–46.
24. M. Haerig, and S. Hofmann: Appl. Surf. Sci., 1998, vol. 25 (1), pp. 99–114.10.1016/S0169-4332(97)00403-0 ↗
25. HSC Chemistry® 4.0, ChemSW®, Inc., and ESM Software, Hamilton, OH 45103.
26. I. Lhermitte-Sebire, R. Colmet, R. Naslain, and C. Bernard: J. Less-Common Met., 1986, vol. 118, pp. 83–102.10.1016/0022-5088(86)90612-0 ↗
27. C. Chatfield, J.N. Lindström, and M.E. Sjöstrand: J. Phys. Colloq., 1989, vol. C5, pp. 377–87.
28. F.A. Golightly, G.C. Wood, and F.H. Stott: Oxid. Met., 1980, vol. 14 (3), pp. 217–34.10.1007/BF00604565 ↗
29. D.P. Garriga-Majo, B.A. Shollock, D.S. Mcphail, R.J. Chater, and J.F. Walker: Int. J. Inorg. Mater., 1999, vol. 1, pp. 325–36.10.1016/S1466-6049(99)00047-1 ↗
30. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit: Progr. in Mater. Sci., 2001, vol. 46, pp. 505–53.10.1016/S0079-6425(00)00020-7 ↗
31. V.K. Tolpygo, and D.R. Clarke: Mater. High Temp., 2000, vol. 17 (1), pp. 59–70.10.1179/mht.2000.011 ↗
32. M. Halvarsson, and S. Vourinen: Surf. Coating Technol., 1995, vol. 76–77, pp. 287–96.10.1016/0257-8972(95)02584-7 ↗
33. B.A. Pint: Oxid. Met., 1996, vol. 45, pp. 1–37.10.1007/BF01046818 ↗
34. B.A. Pint, A.J. Garratt-Reed, and L.W. Hobbs: J. Am. Ceram. Soc., 1998, vol. 81, pp. 305–14.10.1111/j.1151-2916.1998.tb02335.x ↗
35. D.M. Lipkin, D.R. Clarke, M. Hollatz, M. Bobeth, and W. Pompe: Corr. Sci., 1997, vol. 39, pp. 231–42.10.1016/S0010-938X(97)83344-6 ↗
36. M.Y. He, A.G. Evans, and J.W. Hutchinson: Acta Mater., 2000, vol. 48, pp. 2593–2601.10.1016/S1359-6454(00)00053-7 ↗