Deformation banding and ferrite-type rolling textures
Source abstract
Abstract
A computer model for predicting rolling textures formed in bcc metals and alloys deforming by slip using the Taylor-Chin framework and including deformation banding is presented. The model is rate insensitive. Deformation banding in both the rolling and transverse planes were investigated and it is shown that the best results are obtained when grain subdivision in the rolling plane only is allowed. By modeling two kinds of deformation banding in the rolling plane, rotations of typical texture components along the γ fiber and the α fiber have been traced to demonstrate the development of individual texture components formed by deformation banding. The influence of latent hardening through a parameter, L h , on the deformation banding process is included in the model, and it is shown that lower L h produces peak-type textures, whereas higher values for L h lead to more deformation banding as expected, and this strengthens the γ fiber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Mechanical stress and fatigue analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
2. J.F.W. Bishop and R. Hill: Phil. Mag., 1951, vol. 42, pp. 414–27.10.1080/14786445108561065 ↗
3. J.F.W. Bishop and R. Hill: Phil. Mag., 1951, vol. 42, pp. 1298–1307.10.1080/14786444108561385 ↗
4. T. Leffers: Strength of Metals and Alloys, Pergamon, Oxford, United Kingdom, 1979, pp. 769–74.10.1016/B978-1-4832-8412-5.50130-2 ↗
5. R. Honeff and H. Mecking: Proc. 5th Int. Conf. on the Textures of Materials (ICOTOM 5), Springer-Verlag, Berlin, 1978, pp. 265–75.
6. P. Van Houtte: Proc. 6th Int. Conf. on the Textures of Materials (ICOTOM 6), Iron and Steel Institute of Japan, Tokyo, 1981, pp. 428–37.
7. P. Van Houtte: Proc. 7th Int. Conf. on the Textures of Materials (ICOTOM 7), Netherlands Society for Materials Science, Noordwijkerhout, 1984, pp. 7–23.
8. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
9. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2883–2904.10.1016/0001-6160(88)90173-3 ↗
10. J. Hirsch, K. Lücke, and M. Hatherly: Acta Metall., 1988, vol. 36, pp. 2905–27.10.1016/0001-6160(88)90174-5 ↗
11. A. Molinari, G.R. Canova, and S. Ahzi: Acta Metall., 1987, vol. 35, pp. 2983–94.10.1016/0001-6160(87)90297-5 ↗
12. D. Peirce, R.J. Asaro, and A. Needleman: Acta Metall., 1982, vol. 30, pp. 1087–1119.10.1016/0001-6160(82)90005-0 ↗
13. P. Van Houtte: Int. J. Plast., 1994, vol. 10, pp. 719–48.10.1016/0749-6419(94)90043-4 ↗
14. C.S. Lee and B.J. Duggan: Acta Metall., 1993, vol. 41, pp. 2691–99.10.1016/0956-7151(93)90138-I ↗
15. D. Kuhlmann-Wilsdorf: Trans. TMS-AIME, 1962, vol. 224, pp. 1047–61.
16. D. Kuhlmann-Wilsdorf: Phil. Mag., 1999, vol. A79, pp. 955–1008.10.1080/01418619908210342 ↗
17. D. Kuhlmann-Wilsdorf: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2391–2401.10.1007/s11661-999-0247-x ↗
18. C.S. Lee: Ph.D. Thesis, The University of Hong Kong, Hong Kong, 1991.
19. C.S. Lee, B.J. Duggan, and R.E. Smallman: Acta Metall., 1993, vol. 41, pp. 2265–70.10.1016/0956-7151(93)90308-F ↗
20. C.S. Lee, R.E. Smallman, and B.J. Duggan: Scripta Metall., 1995, vol. 33, pp. 727–33.10.1016/0956-716X(95)00227-M ↗
21. G.Y. Chin: Texture in Research and Practice, Springer-Verlag, Berlin, 1969, pp. 51–80.
22. H.J. Bunge: Mathmatische Methoden der Texturanalyse, Akademie-Verlag, Berlin, 1968.
23. G.L. Liu, B.J. Duggan, and L.X. Zhang: EPD Congress 1999, TMS, Warrendale, PA, 1999, pp. 1019–30.
24. P. Van Houtte, L. Delannay, and I. Samajdar: Texture Microstr., 1999, vol. 31, pp. 109–49.10.1155/TSM.31.109 ↗
25. T. Leffers: Mater. Sci. Forum, 1994, vols. 157–162, pp. 1815–20.10.4028/www.scientific.net/MSF.157-162.1815 ↗
26. G.R. Canova, C. Fressengeas, A. Molinari, and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 1961–70.10.1016/0001-6160(88)90298-2 ↗
27. E.C.H. Lim and B.J. Duggan: Texture Microstr., 1996, vols. 26–27, pp. 125–36.10.1155/TSM.26-27.125 ↗
28. E.C.H. Lim: Ph.D. Thesis, The University of Hong Kong, Hong Kong, 1998.
29. Y.J. Chen: Ph.D. Thesis, The University of Hong Kong, Hong Kong, 2000.
30. Y.Y. Tse, G.L. Liu, and B.J. Duggan: Scripta Mater., 2000, vol. 42, pp. 25–30.10.1016/S1359-6462(99)00303-6 ↗