journal article·2002-02

Application of a modified jogged-screw model for creep of TiAl and α-Ti alloys

G. B. Viswanathan, S. Karthikeyan, M. J. Mills, R. W. Hayes

Publisher page

Abstract

Stress exponents for creep, in the range of 5, are typically associated with dislocation creep processes, normally associated with a strong tendency for subgrain formation. In this article, we will demonstrate that there are several important alloy systems that have similar stress dependence and, yet, lack this tendency for subgrain formation. Specifically, dislocations in the intermetallic compound γ-TiAl and the hexagonal close-packed (hcp) α phase of the commercial Ti alloy, Ti-6242, tend to be homogeneously distributed with a tendency for alignment along screw orientation. In both alloy systems, the screw dislocations exhibit a large density of pinning points, which detailed transmission electron microscopy (TEM) investigation indicate are locations of tall jogs. These observations suggest that the jogged-screw model for creep should be appropriate after suitable modification for the presence of these tall jogs. This modified jogged-screw (MJS) model is presented, together with a discussion of the assumptions made, and the results of this model are shown to compare favorably with experiment for both alloy systems. The possible criteria for the formation of tall jogs are also described, and the potential application of this modified model to other alloy systems is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
2. F.R.N. Nabarro: Report Conf. Strength of Solids (University of Bristol), Conf. Proc., 1948, pp. 75–90.
3. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
4. J. Harper and J.E. Dorn: Acta Metall., 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
5. J.R. Weertman: J. Appl. Phys., 1957, vol. 28, pp. 1185–89.10.1063/1.1722604 ↗
6. F.R.N. Nabarro: Phil. Mag., 1967, vol. 16, pp. 231–37.10.1080/14786436708229736 ↗
7. J.R. Weertman: J. Appl. Phys., 1955, vol. 26, pp. 1213–17.10.1063/1.1721875 ↗
8. W.D. Nix and B. Ilschner: 5th Int. Conf. Strength of Metals and Alloys, Conf. Proc., P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, Oxford, United Kingdom 1979, pp. 1503–30.10.1016/B978-1-4832-8412-5.50243-5 ↗
9. H. Brehm and G. Daehn: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 363–71.10.1007/s11661-002-0097-2 ↗
10. G.B. Viswanathan, V.K. Vasudevan, and M.J. Mills: Acta Mater., 1999, vol. 47, pp. 1399–1411.10.1016/S1359-6454(99)00021-X ↗
11. C.R. Barrett and W.D. Nix: Acta Metall., 1965, vol. 13, pp. 1247–58.10.1016/0001-6160(65)90034-9 ↗
12. P.B. Hirsch and D.H. Warrington: Phil. Mag., 1961, vol. 6, pp. 735–68.10.1080/14786436108238367 ↗
13. N.F. Mott: Creep and Fracture of Metals at High Temperatures, Proc. NPL Symp., HMSO, London, 1956, pp. 21–24.
14. L. Raymond and J.E. Dorn: Trans. AIME, 1964, vol. 230, pp. 560–68.
15. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., John Wiley & Sons, Inc., New York, NY, 1982.
16. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. Am. Soc. Met., 1969, vol. 62, pp. 155–79.
17. K. Xu and R.J. Arsenault: Acta Mater., 1999, vol. 47, pp. 3023–40.10.1016/S1359-6454(99)00146-9 ↗
18. H. Siethoff, W. Schroter, and K. Ahlborn: Acta Metall., 1985, vol. 33, pp. 443–48.10.1016/0001-6160(85)90086-0 ↗
19. E. Furubayashi: J. Phys. Soc. Jpn., 1969, vol. 27, pp. 130–46.10.1143/JPSJ.27.130 ↗
20. G.B. Viswanathan: Ph.D. Thesis, University of Cincinnati, Cincinnati, OH, 1997.
21. J. Beddoes, W. Wallace, and L. Zhao: Int. Mater. Rev., 1995, vol. 40, pp. 197–217.10.1179/imr.1995.40.5.197 ↗
22. T.A. Parthasarathy, M.G. Mendiratta, and D.M. Dimiduk: Scripta Mater., 1997, vol. 37, pp. 315–21.10.1016/S1359-6462(97)00099-7 ↗
23. W. Sprengel, H. Nakajima, and H. Oikawa: Mater. Sci. Eng. A, 1996, vol. A213, pp. 45–50.10.1016/0921-5093(96)10246-X ↗
24. J.N. Wang and T.G. Nieh: Acta Mater., 1998, vol. 46, pp. 1887–1901.10.1016/S1359-6454(97)00434-5 ↗
25. B. Viguier, K.J. Hemker, J. Bonneville, F. Louchet, and J.L. Martin: Phil. Mag. A, 1995, vol. 71, pp. 1295–1313.10.1080/01418619508244375 ↗
26. M. Lu and K.J. Hemker: Acta Mater., 1997, vol. 45, pp. 3573–85.10.1016/S1359-6454(97)00075-X ↗
27. Y. Ishikawa and H. Oikawa: Mater. Trans., JIM (Jpn.), 1994, vol. 35, pp. 336–45.10.2320/matertrans1989.35.336 ↗
28. S. Sriram, D.M. Dimiduk, P.M. Hazzledine, and V.K. Vasudevan: Phil. Mag. A, 1997, vol. 76, pp. 956–93.10.1080/01418619708200010 ↗
29. F. Louchet and B. Viguier: Phil. Mag. A, 1995, vol. 71, pp. 1313–33.10.1080/01418619508244376 ↗
30. G.B. Viswanathan and V.K. Vasudevan: Gamma Titanium Aluminides, TMS-AIME, 1995, pp. 967–74.
31. S. Kroll, H. Mehrer, N. Stolwijk, C. Herzig, R. Rosenkranz, and G. Frommeyer: Z. Metallkd., 1992, vol. 83, pp. 591–95.
32. U. Messerschmidt, M. Bartsch, D. Haussler, M. Aindow, R. Hattenhauer, and I.P. Jones: High-Temperature Ordered Intermetallic Alloys VI. Part I, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 47–52.
33. J.P. Simmons, M.J. Mills, and S.I. Rao: High-Temperature Ordered Intermetallic Alloys VI. Part I, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 137–44.
34. S. Karthikeyan, G.B. Viswanathan, Y.-W. Kim, V.K. Vasudevan, and M.J. Mills: in ISSI-3. 3rd Int. Conf. on Structural Intermetallics, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 717–23.
35. S. Karthikeyan, G.B. Viswanathan, Y.-W. Kim, P.I. Gouma, V.K. Vasudevan, and M.J. Mills: Mater. Sci. Eng. A, 2001, in press.
36. P.J. Bania and J.A. Hall: Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde, Oberurse, Germany, 1985, pp. 2371–78.
37. S. Ranganath and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927–35.10.1016/1359-6454(95)00242-1 ↗
38. G.B. Viswanathan, R.W. Hayes, and M.J. Mills: unpublished research, 2001.
39. M. Koppers, C. Herzig, M. Friesel, and Y. Mishin: Acta Mater., 1997, vol. 45, pp. 4181–91.10.1016/S1359-6454(97)00078-5 ↗
40. A. Gershick, D.G. Pettifor, and V. Vitek: Phil. Mag. A, 1998, vol. 77, pp. 999–1012.10.1080/014186198254155 ↗
41. T. Neeraj, D.H. Hou, G.S. Daehn, and M.J. Mills: Acta Mater., 2000, vol. 48, pp. 1225–38.10.1016/S1359-6454(99)00426-7 ↗
42. S. Ikeno and E. Furubayashi: Phys. Status Solidi A, 1975, vol. 27, pp. 581–90.10.1002/pssa.2210270229 ↗
43. V. Vitek: Cryst. Lattice Defects, 1974, vol. 5, pp. 1–34.
44. S. Ikeno and E. Furubayashi: Phys. Status Solidi A, 1972, vol. 12, pp. 611–22.10.1002/pssa.2210120234 ↗
45. S. Ikeno: Phys. Status Solidi A, 1976, vol. 36, pp. 317–28.10.1002/pssa.2210360134 ↗
46. J.R. Low, Jr. and A.M. Turkalo: Acta Metall., 1962, vol. 10, pp. 215–27.10.1016/0001-6160(62)90119-0 ↗