journal article·2003-10

Work-hardening and recovery mechanisms in gamma-based titanium aluminides

J. D. H. Paul, F. Appel

Publisher page

Abstract

The work-hardening mechanisms in two-phase γ-titanium aluminide alloys were characterized in terms of the glide obstacles determining the velocity and slip path of dislocations, utilizing transmission electron microscopy (TEM) observations and thermodynamic-glide parameters. There was clear evidence that short-range obstacles in the form of dislocation debris and dipoles were produced during plastic deformation at room temperature. These dislocation obstacles contributed significantly to work hardening. The observed strong strain hardening arose from long-range elastic dislocation interactions and the production of dipole and debris defects. The thermal stability of these deformation-induced defects was assessed by isothermal and isochronal annealing. The results indicated that the dipole and debris defects were relatively unstable upon annealing at moderately high temperatures, which led to significant recovery of work hardening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. D.M. Dimiduk: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 3–20.
2. J. Beddoes, W. Wallace, and L. Zhao: Int. Met. Rev., 1995, vol. 40, pp. 197–217.10.1179/imr.1995.40.5.197 ↗
3. F. Appel and R. Wagner: Mater. Sci. Eng., 1998, vol. R22, pp. 187–268.10.1016/S0927-796X(97)00018-1 ↗
4. R. Wagner, F. Appel, B. Dogan, P.J. Ennis, U. Lorenz, J. Müllauer, H. Nicolai, W. Quadakkers, L. Singheiser, W. Smarsly, W. Vaidya, and K. Wurzwallner: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 387–404.
5. F. Appel, U. Lorenz, M. Oehring, U. Sparka, and R. Wagner: Mater. Sci. Eng. A, 1997, vol. A233, pp. 1–14.10.1016/S0921-5093(97)00043-9 ↗
6. F. Appel, P. Beaven, and R. Wagner: Acta Metall. Mater., 1993, vol. 41, pp. 1721–32.10.1016/0956-7151(93)90191-T ↗
7. G. Schöck: Phys. Status Solidi, 1965, vol. 8, pp. 499–507.10.1002/pssb.19650080209 ↗
8. F. Appel, U. Sparka, and R. Wagner: in High Temperature Ordered Intermetallic Alloys IV, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., MRS, Pittsburgh, PA, 1995, vol. 364, pp. 623–28.
9. U. Fröbel and F. Appel: Acta Mater., 2002, vol. 50, pp. 3693–3707.10.1016/S1359-6454(02)00182-9 ↗
10. U. Christoph, F. Appel, and R. Wagner: Mater. Sci. Engeer. A, 1997, vols. A239–A240, pp. 39–45.10.1016/S0921-5093(97)00558-3 ↗
11. A.C. Damask and G.J. Dienes: Point Defects in Metals, Gordon and Breach, New York, NY, 1963, pp. 145–53.
12. S. Kroll, H. Mehrer, N. Stolwijk, Ch. Herzig, R. Rosenkranz, and G. Frommeyer: Z. Metallkd., 1992, vol. 83, pp. 591–95.
13. Ch. Herzig, T. Przeorski, and Y. Mishin: Intermetallics, 1999, vol. 7, pp. 389–404.10.1016/S0966-9795(98)00117-4 ↗
14. B. Viguier and K.J. Hemker: Phil. Mag. A, 1996, vol. 73, pp. 575–99.10.1080/01418619608242985 ↗
15. M. Lu and K.J. Hemker: Phil. Mag. A, 1998, vol. 77, pp. 325–39.10.1080/014186198254443 ↗
16. M.A. Stucke, D.M. Demiduk, and P.M. Hazzledine: in High Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. Whittenberger, and M. Yoo, eds., MRS, Pittsburgh, PA, 1993, vol. 288, pp. 471–76.