journal article·2002-06

Effect of alternative aging process on the fracture and interfacial properties of particulate Al2O3-reinforced Al (6061) metal matrix composite

H. R. Shakeri, Zhirui Wang

Publisher page

Abstract

The effects of different aging processes on ductility, fracture, and interfacial properties in particulate Al2O3-reinforced Al (6061) metal-matrix composite (MMCs) were studied. Tensile tests based on relevant ASTM standards were performed to investigate the mechanical responses of specimens under different heat-treatment conditions. Scanning electron microscopy (SEM), field-emission SEM (FESEM), and transmission electron microscopy (TEM) studies were carried out to correlate fracture mechanism(s) with microstructural features. Based on the experimental results, the overall effect of heat treatment on tensile properties is similar to that in the monolithic alloy, however, the rate of recovery in fracture-related properties, such as elongation to fracture, is lower in the overaged condition for the MMC samples. To explain this “low” recovery behavior of overaged MMCs, the following observations have been taken into account: (1) a shift of the materials’ behavior from particle fracture to interface (or near-interface) debonding fracture, when moving from the underaged to overaged regime, and (2) more frequent observations of interfacial reaction products (spinel) on the fracture surface of overaged specimens. The presence/formation of spinel phase at the interface was recognized as the main cause of this behavior. Although spinel products mainly form during material processing, they may continue to form in the solid state as well. As a result, the surface morphology of the spinel phase in the underaged specimens is different from that in the overaged specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. B. Mingler and H.P. Kamthaler: Z. Metallkd., 1993, vol. 84 (5) pp. 313–19.
2. Zhirui Wang: Key Eng. Mater., 1995 vols. 104–107, pp. 765–90.10.4028/www.scientific.net/KEM.104-107.765 ↗
3. Z.H.A. Kassam, R.J. Zhang, and Z. Wang: Mater. Sci. Eng., 1995, vol. A203, pp. 286–99.10.1016/0921-5093(95)09828-3 ↗
4. Z. Wang and R.J. Zhang: Acta Metall., 1994, vol. 4, pp. 1433–45.10.1016/0956-7151(94)90162-7 ↗
5. T.G. Nieh and R.F. Karlak: Scripta Metall., 1984, vol. 18 (1), pp. 25–28.10.1016/0036-9748(84)90083-8 ↗
6. S. Dionne and M.R. Krishnadev: Proc. of Int. Conf. on Fabrication of Particulates Reinforced Metal Composites, Montreal, Canada, Sept. 17–19, 1990, J. Masounave and F.G. Hamel eds., ASM International, Materials Park, Ohio, Sept. 1990, pp. 261–270.
7. J.H. Shyong and C. Ruiz: Advanced Composites ’93, Int. Conf. on Advanced Composite Materials, Wollongong, Australia, Feb. 15–19, 1993, T. Chandra and A.K. Dhingra, eds., TMS, Warrendale, PA, 1993, pp. 1055–60.
8. W.H. Hunt Jr., O. Richmond and R.D. Young: Int. Conf. on Composite Materials ICCM-VI, F.L. Matthews, N.C.R. Buskell, J.M. Hodginson and J. Morton, eds., Elsevier Applied Science, London, 1987, pp. 209–223.
9. B. Roebuck and J.D. Lord: in IOP Short Meetings on Test Techniques for Metal Matrix Composites, Nov. 1990, N.D.R. Goddard, ed., IOP Publishing Ltd., Bristol, United Kingdom, 1991, pp. 110–28.
10. D.L. Davidson: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, NY, 1991, pp. 217–34.
11. P. Mummery and B. Derby: Mater. Sci. Eng., 1991, vol. A135, pp. 221–24.10.1016/0921-5093(91)90566-6 ↗
12. N. Wang, Z. Wang, and G.C. Weatherly: Proc. Int. Conf., Montreal, Sept. 17–19, 1990, ASM INTERNATIONAL, Materials Park, OH, 1990.
13. D.L. McDanels: Metall. Trans. A, 1985, vol. 16A, pp. 1105–15.10.1007/BF02811679 ↗
14. N. Tsangarakis, B.O. Andrews, and C. Cavarellaro: J. Comp. Mater., 1987, vol. 21 (5), pp. 481–92.10.1177/002199838702100505 ↗
15. S. Turenne and J. Masounave: Processing of Ceramic and Metal Matrix Composites, Proc. of the Inter. Symp. on Advances in Processing of Ceramics and Metal Matrix Composites, H. Mostaghaci, ed., Halifax, Nova Scotia, Canada, August 20–24, 1989, Pergamon Press, New York, 1989, pp. 206–216.10.1016/B978-0-08-037298-3.50026-8 ↗
16. M. Skibo, P.L. Morris, and D.J. Lloyd: Proc. of the Int. Symp. on Advances in Cast Reinforced Metal Composites, Chicago, Illinois, USA, Sept. 24–30, 1988, S.G. Fisherman and A.K. Dhingra, eds., American Society for Metals, Metals Park, Ohio, 1988, pp. 257–262.
17. S.F. Corbin and D.S. Wilkinson: Processing of Ceramic and Metal Matrix Composites, Proc. of the Inter. Symp. on Advances in Processing of Ceramics and Metal Matrix Composites, H. Mostaghaci, ed., Halifax, Nova Scotia, Canada, August 20–24, 1989, Pergamon Press, New York, 1989, pp. 401–11.10.1016/B978-0-08-037298-3.50042-6 ↗
18. C.M. Friend: Mater. Sci. Technol., 1989, vol. 5 (1), pp. 1–7.10.1179/mst.1989.5.1.1 ↗
19. K.H. Schwalbe: Eng. Fract. Mech., 1977, vol. 9, pp. 795–832.10.1016/0013-7944(77)90004-2 ↗
20. G.T. Hahn and A.R. Rosenfield: Metall. Trans. A, 1975, vol. 6A, pp. 653–68.10.1007/BF02672285 ↗
21. G.G. Garrett and J.F. Knott: Metall. Trans. A, 1978, vol. 9A, pp. 1187–1201.10.1007/BF02652242 ↗
22. Y. Flom and R.J. Arsenault: Acta Metall., 1989, vol. 9, pp. 2413–23.10.1016/0001-6160(89)90039-4 ↗
23. J. Gurland: Trans. TMS-AIME, 1963, vol. 227, pp. 1146–50.
24. I.L. Mogford: Metall. Rev., 1967, vol. 114 (12), pp. 49–68.10.1179/imr.1967.12.1.49 ↗
25. T.B. Cox and J.R. Low: Metall. Trans., 1974, vol. 5, pp. 1457–70.10.1007/BF02646633 ↗
26. G. LeRoy, J.D. Embury, G. Edward, and M.F. Ashby: Acta Metall., 1981, vol. 29, pp. 1509–22.10.1016/0001-6160(81)90185-1 ↗
27. R.C. Bates: in Proc. 113th AIME Conf., Los Angeles, CA, 1984, J.M. Wells and J.D. Landes, eds., The Metallurgical Society of AIME, Warrendale, PA, 1985, pp. 117–155.
28. W.W. Gerberich: in Proc. 113th AIME Conf., Los Angeles, CA, 1984, J.M. Wells and J.D. Landes, eds., The Metallurgical Society of AIME, Warrendale, PA, 1985, p. 49–74.
29. D. Firrao and R. Roberti: in Proc. 113th AIME Conf., Los Angeles, CA, 1984, J.M. Wells and J.D. Landes, eds., The Metallurgical Society of AIME, Warrendale, PA, 1985, pp. 165–77.
30. T. Christman, A. Needleman, S. Nutt, and S. Suresh: Mater. Sci. Eng., 1989, vol. A107, pp. 46–61.
31. C.P. You, A.W. Thompson, and I.M. Bernstein: Scripta Metall., 1987, vol. 21, pp. 181–85.10.1016/0036-9748(87)90431-5 ↗
32. D.F. Hanson, S.M. Hoover, and C.R. Crowe: J. Mater. Sci., 1985, vol. 20, pp. 4147–54.10.1007/BF00552410 ↗
33. R.J. Arsenault: J. Compos. Technol. Res., 1988, vol. 10, pp. 140–45.10.1520/CTR10276J ↗
34. S.R. Nutt and A. Needleman: Scripta Metall., 1987, vol. 21, pp. 705–10.10.1016/0036-9748(87)90389-9 ↗
35. S.H. Doong, T.C. Lee, I.M. Robertson, and H.K. Birnbaum: in Fundamental Relationships between Microstructure and Properties of Metal Matrix Composites, P.K. Liaw and M.N. Gungor, eds., TMS, Warrendale, PA, 1990, pp. 301–11.
36. J.J. Lewandowski, C. Liu, and W.H. Hunt Jr.: in Processing and Properties for Powder Metallurgy Composites, P. Kumar, K. Vedula, and A. Ritter, eds., TMS, Warrendale, PA, 1988, pp. 117–37.
37. Y. Flom and R.J. Arsenault: Int. Conf. on Composite Materials ICCM-VI, F.L. Matthews, N.C.R. Buskell, J.M. Hodginson and J. Morton, eds., Elsevier Applied Science, London, 1987, pp. 189–98.
38. C.R. Crowe, R.A. Gray, and D.F. Hasson: 5th Int. Conf. on Composite Materials ICCM-V (Conf. Proc.), San Diego, California July 29-Aug. 1, 1985, W.C. Harringan, J. Strife and A.K. Dhingra, eds., The Metallurgical Society Inc., (TMS), Warrendale, Pennsylvania, 1985, pp. 843–866.
39. A.P. Divecha, S.G. Fishman, and S.D. Karmarkar: J. Met., 1981, vol. 33 (9), pp. 12–17.
40. T.G. Nieh, R.A. Rainen, and D.J. Chellman: 5th Int. Conf. on Composite Materials ICCM-V (Conf. Proc.), San Diego, California July 29–Aug. 1, 1985, W.C. Harringan, J. Strife and A.K. Dhingra, eds., The Metallurgical Society, Inc. (TMS), Warrendale, Pennsylvania, 1985, pp. 825–42.
41. S.R. Nutt and J.M. Duva: Scripta Metall., 1986, vol. 20, pp. 1055–58.10.1016/0036-9748(86)90435-7 ↗
42. S.V. Nair, J.K. Tien, and R.C. Bates: Int. Met. Rev., 1985, vol. 30 (6), pp. 275–90.
43. H.G.F. Wilsdorf: Mater. Sci. Eng., 1983, vol. 59, pp. 1–39.10.1016/0025-5416(83)90085-X ↗
44. S.H. Goods and L.M. Brown: Acta Metall., 1979, vol. 27, pp. 1–15.10.1016/0001-6160(79)90051-8 ↗
45. L.M. Brown and J.D. Embury: Proc. 3rd Int. Conf. On the Strength of Metals and Alloys, Cambridge, England, 1973, Institute of Metals, London, England, 1973, pp. 164–169.
46. R.J. Zhang, Z. Wang, and C. Simpson: Mater. Sci. Eng., 1991, vol. A148, pp. 53–66.10.1016/0921-5093(91)90865-K ↗
47. J.J. Lewandowski, C. Liu, and W.H. Hunt: Mater. Sci. Eng., 1989, vol. A107, pp. 241–55.10.1016/0921-5093(89)90392-4 ↗
48. S. Lee, T.H. Kim, and D. Kwon: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2213–23.10.1007/BF02652322 ↗
49. M. Manoharan and J.J. Lewandowski: Scripta Metall., 1989, vol. 23 (3), pp. 301–04.10.1016/0036-9748(89)90371-2 ↗
50. H. Lagace and D.J. Lloyd: Can. Metall. Q., 1989, vol. 28, pp. 145–52.10.1179/cmq.1989.28.2.145 ↗
51. A. Mortensen: Proc. of Int. Conf. on Fabrication of Particulates Reinforced Metal Composites, Montreal, Canada, Sept. 17–19, 1990, J. Masounave and F.G. Hamel eds., ASM International, Materials Park, Ohio, 1990, pp. 217–233.
52. M. Manoharam and J. J. Lewandowski: Acta Metall., 1990, vol. 38, pp. 489–96.10.1016/0956-7151(90)90155-A ↗
53. T. F. Kilmowicz and K. S. Vecchio: in Fundamental Relationships between Microstructures and Mechanical Properties in Metal Matrix Composites, P. K. Liaw and M. N. Gungor, eds., TMS, Warrendale, PA, 1990, pp. 255–67.
54. P. L. Ratnaparkhi and H. J. Rack: Scripta Metall., 1989, vol. 23, pp. 2143–46.10.1016/0036-9748(89)90247-0 ↗
55. B. Roebuck, T. A. E. Gorley, and L. N. McCartney: Mater. Sci. Technol., 1989, vol. 5, pp. 105–17.10.1179/mst.1989.5.2.105 ↗
56. D. Broek: Elementary Engineering Fracture Mechanics, 4th revised ed., Kluwer Academic Publishers, Dordrecht, 1991.
57. W. C. Harrigan, Jr., M. T. Ristow, J. F. Dolowy, Jr., and B. A. Webb: 112th AIME Annual Meeting, Atlanta, GA, Mar. 6–10, 1983.
58. S. V. Kamat, J. P. Hirth, and R. Mehrabian: Acta Metall., 1989, vol. 37(9), pp. 2395–2402.10.1016/0001-6160(89)90037-0 ↗
59. A. Munitz, M. Metzger, and R. Mehrabian: Metall. Trans. A, 1979, vol. 10A, pp. 1491–97.10.1007/BF02812014 ↗
60. N. Wang, Z. Wang, and G. C. Weatherly: Metall. Trans. A, 1992, vol. 23A, pp. 1423–30.10.1007/BF02647325 ↗
61. C. G. Levi, G. J. Abbaschian, and R. Mehrabian: Metall Trans. A, 1978, vol. 9A, pp. 697–711.10.1007/BF02659927 ↗
62. A. D. McLeod: Proc. of Int. Conf. on Fabrication of Particulates Reinforced Metal Composites, Montreal, Canada, Sept. 17–19, 1990, J. Masounave and F.G. Hamel eds., ASM International, Materials Park, Ohio, 1990, pp. 17–21.
63. J. C. Lee, G. H. Kim, and H. I. Lee: Mater. Sci. Technol., 1997, vol. 13, pp. 182–86.10.1179/026708397790302449 ↗