journal article·1994-02

Elevated temperature fracture of RS/PM alloy 8009: part i. fracture mechanics behavior

William C. Porr, Richard P. Gangloff

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. W. E. Quist and R.E. Lewis: inRapidly Solidified Powder Aluminum Alloys, M.E. Fine and E.A. Starke, Jr., eds., ASTM STP 890, 1986, pp. 7-38.10.1520/STP33021S ↗
2. H. G. F. Wilsdorf, F.E. Wawner, Jr., and J.A. Wert:Very High Temperature Aluminum Materials Concepts, Wright Laboratory Report No. WL-TR-91-4022, Wright-Patterson Air Force Base, OH, 1991.
3. Rapidly Solidified Powder Aluminum Alloys, M.E. Fine and E.A. Starke, Jr., eds., ASTM STP 890, 1986.
4. Dispersion Strengthened Aluminum Alloys, Y-W. Kim and W. M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988.
5. High-Strength Powder Metallurgy Aluminum Alloys, M. J. Koczak and G.J. Hildeman, eds., TMS-AIME, Warrendale, PA, 1982.
6. High-Strength Powder Metallurgy Aluminum Alloys II, M. J. Koczak and G.J. Hildeman, eds., TMS-AIME, Warrendale, PA, 1986.
7. T. E. Tietz and I. G. Palmer: inAdvances in Powder Technology, G.Y. Chin, ed., ASM INTERNATIONAL, Metals Park, OH, 1982, pp. 189–224.
8. W. B. Lisagor: inThermal Structures and Materials for High Speed Flight, E.A. Thornton, ed., AIAA, Washington, DC, 1992, vol. 140, pp. 161–79.
9. E. J. Lavernia, J.D. Ayers, and T.S. Srivatsan:Int. Mater. Rev., 1992, vol. 37, pp. 1–44.10.1179/imr.1992.37.1.1 ↗
10. P.S. Gilman: inThermal Structures and Materials for High Speed Flight, E.A. Thornton, ed., AIAA, Washington, DC, 1992, vol. 140, pp. 141–60.
11. E. A. Starke, Jr.: inAlloying, J.L. Walter, M.R. Jackson, and C.T. Sims, eds., ASM International, Metals Park, OH, 1987, pp. 165–97.
12. W.C. Porr, Jr.: Ph.D. Thesis, University of Virginia, Charlottesville, VA, 1992.
13. W. C. Porr, Jr., Y. Leng, and R. P. Gangloff: inLow Density, High Temperature P/M Alloys, W.E. Frazier, M.J. Koczak, and P.W. Lee, eds., TMS-AIME, Warrendale, PA, 1991, pp. 129–55.
14. D.J. Skinner. M.S. Zedalis, and P. Gilman:Mater. Sci. Eng., 1989, A l19, pp. 81-86.10.1016/0921-5093(89)90526-1 ↗
15. K. S. Chan:Metall. Trans. A, 1989, vol. 20A, pp. 155–64.10.1007/BF02647502 ↗
16. K. S. Chan:Metall. Trans. A, 1989, vol. 20A, pp. 2337–44.10.1007/BF02666668 ↗
17. W. C. Porr, Jr., A.P. Reynolds, Y. Leng, and R. P. Gangloff:Scripta Metall. Mater., 1991, vol. 25, pp. 2627–32.10.1016/0956-716X(91)90129-O ↗
18. E. Bouchard, L. Kubin, and H. Octor:Metall. Trans. A, 1991, vol. 22A, pp. 1021–28.10.1007/BF02661095 ↗
19. J. C. Ehrström, E. Andrieu, and A. Pineau:Scripta Metall. Mater., 1989, vol. 23, pp. 1397–1400.10.1016/0036-9748(89)90066-5 ↗
20. D. J. Skinner, M.S. Zedalis, and J. Peltier: inLight-Weight Alloys for Aerospace Applications, E.W. Lee, E.H. Chia, and N. J. Kim, eds., TMS-AIME, Warrendale, PA, 1989, pp. 71–8.
21. S. Mitra:Scripta Metall. Mater., 1992, vol. 27, pp. 521–26.10.1016/0956-716X(92)90333-A ↗
22. H. Westengen: inStrength of Metals and Alloys, R.C. Gifskins, ed., Pergamon Press, New York, NY, 1983, ICSMA-6, pp. 461–66.
23. D. J. Lloyd and L.R. Morris:Acta Metall., 1977, vol. 25, pp. 857–61.10.1016/0001-6160(77)90170-5 ↗
24. J. A. Hawk, P.K. Mirchandani, R.C. Benn, and H. G. F. Wilsdorf: inDispersion Strengthened Aluminum Alloys, Y. -W. Kim and W.M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 517–37.
25. W.C. Porr, Jr. and R.P. Gangloff: unpublished research.
26. K.V. Jata:Fracture Toughness Behavior of Advanced Aluminum Alloys, Presented at Aeromal '90, Long Beach, CA, May 1990. 27. P. Krawczyk and K.V. Jata:Scripta Metall. Mater.v 1990, vol. 24, pp. 1009-13.
27. K. S. Chan: inDispersion Strengthened Aluminum Alloys, Y. -W. Kim and W.M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 283–308.
28. D. Y. Lee and D. E. Zupon: inDispersion Strengthened Aluminum Alloys, Y. -W. Kim and W.M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 265–81.
29. S. K. Das:Int. J. Powder Metall., 1988, vol. 24 (2), pp. 175–83.
30. P. S. Gilman, M.S. Zedalis, J.M. Peltier, and S.K. Das:Rapidly Solidified Aluminum-Transition Metal Alloys for Aerospace Applications, AIAA/AHS/ASEE Aircraft Design, Systems and Operations Conference, AIAA, Washington, DC, 1988.
31. K. S. Chan:Acta Metall., 1989, vol. 37 (4), pp. 1217–26.10.1016/0001-6160(89)90116-8 ↗
32. A. M. Brown, D.J. Skinner, D. Raybould, S.K. Das, R.L. Bye, and C.M. Actam: inAluminum Alloys: Their Physical and Mechanical Properties, E.A. Starke, Jr. and T.H. Sanders, Jr., eds., EMAS, West Midlands, United Kingdom, 1986, pp. 1029–36.
33. D. J. Skinner: inDispersion Strengthened Aluminum Alloys, Y. -W. Kim and W.M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 181–97.
34. M. Zedalis, D. Raybould, D.J. Skinner, and S.K. Das: inProcessing of Structural Metals by Rapid Solidification, F. H. Froes and S.J. Savage, eds., ASM, Metals Park, OH, 1987, pp. 347–54.
35. D. J. Skinner, R. L. Bye, D. Raybould, and A.M. Brown:Scripta Metall., 1986, vol. 20, pp. 867–72.10.1016/0036-9748(86)90456-4 ↗
36. M. Zedalis and D.J. Skinner: Allied Signal, Inc., Morristown, NJ, unpublished research, 1991.
37. J. W. Hutchinson:J. Appl. Mech. Trans. ASME, 1983, vol. 50, pp. 1042–51.10.1115/1.3167187 ↗
38. J. D. Landes:Int. J. Fract., 1980, vol. 16, pp. R183-R186.10.1007/BF00018249 ↗
39. Annual Book of ASTM Standards, Designation E 1152-87, ASTM, Philadelphia, PA, 1992, 3.01, pp. 847-57.
40. Annual Book of ASTM Standards, Designation E 813-89, ASTM, Philadelphia, PA, 1992, 3.01, pp. 732-46.
41. Annual Book of ASTM Standards, Designation E 399-83, ASTM, Philadelphia, PA, 1992, 3.01, pp. 506-36.
42. Y. Leng, W. C. Porr, Jr., and R.P. Gangloff:Scripta Metall. Mater., 1990, vol. 24, pp. 2163–68.10.1016/0956-716X(90)90504-A ↗
43. P. W. Bridgman:Studies in Large Flow and Fracture, McGraw- Hill Book Company, London, 1952, pp. 9–32.
44. A. C. MacKenzie, J.W. Hancock, and D.K. Brown:Eng. Fract. Mech., 1977, vol.9, pp. 167–88.10.1016/0013-7944(77)90062-5 ↗
45. Y.B. Xu: University of Virginia, Charlottesville, VA, unpublished research, 1992.
46. J. W. Hancock and D. F. Brown:J. Mech. Phys. Solids, 1983, vol. 31, pp. 1–24.10.1016/0022-5096(83)90017-0 ↗
47. Y. Leng, W.C. Porr, Jr., and R. P. Gangloff:Scripta Metall. Mater., 1991, vol. 25, pp. 895–900.10.1016/0956-716X(91)90244-U ↗
48. R. J. Bucci:Eng. Fract. Mech., 1979, vol. 12, pp.407–41.10.1016/0013-7944(79)90053-5 ↗
49. K. T. Venkateswara Rao and R. O. Ritchie:Acta Metall., 1990, vol. 38 (11), pp. 2309–26.
50. R. O. Ritchie and A.W. Thompson:Metall. Trans. A, 1985, vol. 16A, pp. 233–48.10.1007/BF02815305 ↗
51. R. M. McMeeking:J. Mech. Phys. Solids, 1977, vol. 25, pp. 357–81.10.1016/0022-5096(77)90003-5 ↗
52. Y. Huang and J.W. Hutchinson: inThe Modeling of Material Behavior and Its Relation to Design, J.D. Embury and A. W. Thompson, eds., TMS-AIME, Warrendale, PA, 1990, pp. 129–47.
53. P. F. Thomason:Ductile Fracture of Metals, Pergamon Press, Oxford, 1990, pp. 81–93.
54. H. G. F. Wilsdorf: inDispersion Strengthened Aluminum Alloys, Y.- W. Kim and W.M. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 3–29.
55. H.G. F. Wilsdorf and D. Kuhlmann-Wilsdorf: inModeling of Plastic Deformation and Its Engineering Applications, S. I. Anderson, J. B. Bilde-Sorensen, N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, O.B. Pedersen, and B. Ralph, eds., RisØ National Laboratory, Roskilde, Denmark, 1992, pp. 511–17.
56. D. Kuhlmann-Wilsdorf and H. G. F. Wilsdorf:Phys. Status Solidi, 1992, vol. 172, pp. 235–48.10.1002/pssb.2221720122 ↗
57. H. G. F. Wilsdorf and D. Kuhlmann-Wilsdorf:Mater. Sci. Eng., 1993, vol. 164 (1-2), pp. 1–14.10.1016/0921-5093(93)90638-U ↗
58. M.A. Rowley: Master's Thesis, University of Virginia, Charlottesville, VA, 1993.
59. AP. Reynolds: NASA-Langley Research Center, Hampton, VA, unpublished research, 1991.
60. D. Lee and R.B. Actamson: inZirconium in the Nuclear Industry, A.L. Lowe, Jr. and G.W. Parry, eds., ASTM STP 633, 1977, pp. 385-401.
61. A. T. Santhanam and R.E. Reed-Hill:Metall. Trans., 1971, vol. 2, pp.2619–22.10.1007/BF02814903 ↗
62. M. A. Meyers and K.K. Chawla:Mechanical Metallurgy: Principles and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, pp. 581–86.
63. F. A. McClintock:J. Appl. Mech., Trans ASME, Series E, 1968, vol. 35, pp. 363–71.10.1115/1.3601204 ↗
64. R. O. Ritchie, W. L. Server, and R. A. Wullaert:Metall. Trans. A, 1979, vol. 10A, pp. 1557–70.10.1007/BF02812022 ↗
65. R. H. Van Stone, T.B. Cox, J.R. Low, Jr., and J.A. Psioda:Int. Met. Rev., 1985, vol. 30, p. 1579.
66. J. R. Rice and M.A. Johnson: inInelastic Behavior of Solids, McGraw-Hill, New York, NY, 1970, pp. 641–72.
67. J. R. Rice and E.P. Sorenson:J. Mech. Phys. Solids, 1978, vol. 26, pp. 163–86.10.1016/0022-5096(78)90007-8 ↗
68. J. W. Hutchinson:J. Mech. Phys. Solids, 1968, vol. 16, pp. 13–31.10.1016/0022-5096(68)90014-8 ↗
69. J..R. Rice and G.F. Rosengren:J. Mech. Phys. Solids, 1968, vol. 16, pp. 1–12.10.1016/0022-5096(68)90013-6 ↗
70. N. R. Moody, S.L. Robinson, and M.W. Perra:Internal Hydrogen Effects on Thresholds for Crack Growth in the Iron- Based Superalloy IN903, Sandia Report SAND90-8466, Sandia National Laboratories, Livermore, CA.
71. J.R. Rice, W.J. Drugan, and T.L. Sham: inFracture Mechanics: 12th Conf. ASTM STP 700, 1980, pp. 189-221.10.1520/STP36972S ↗