Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings
Source abstract
Abstract
Microstructural and chemical evolution induced by thermal cycling of a platinum-modified diffusion aluminide bond coat was investigated with transmission electron microscopy (TEM), X-ray diffraction, (XRD) and electron microprobe analysis. As-fabricated, the bond coat was confirmed to be an ordered B2 structure, but the underlying microstructure was found to be modulated. Thermal cycling resulted in a primarily outward diffusion of Ni and the formation of a Ni-rich bond coat containing secondary L12 precipitates. Closer inspection of the bond coat revealed a transformation from its original B2 structure to a L10 martensite. In-situ TEM observations indicated that the martensite is stable at lower temperatures and that the parent B2 structure reappears at higher temperatures. These observations can be used to explain the variations in strength that have recently been measured in thermally cycled bond coats. The resulting transformation strain is also argued to play an important role in determining the accumulation of stress and strain in thermally cycled thermal barrier coatings (TBCs).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. R.A. Miller: J. Am. Ceram. Soc., 1984, vol. 67, p. 517.10.1111/j.1151-2916.1984.tb19162.x ↗
2. P.K. Wright and A.G. Evans: Current Opinion in Solid State and Materials Science, 1999, vol. 4, p. 255.10.1016/S1359-0286(99)00024-8 ↗
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit: Progr. Mater. Sci., 2001, vol. 46, p. 505.10.1016/S0079-6425(00)00020-7 ↗
4. D.R. Mumm and A.G. Evans: Key Eng. Mater., 2001, vol. 197, p. 199.10.4028/www.scientific.net/KEM.197.199 ↗
5. N.P. Padture, M. Gell, and E.H. Jordan: Sci., 2002, vol. 296, p. 280.10.1126/science.1068609 ↗
6. P. Deb, D.H. Boone, and T.F. Manley II: J. Vac. Sci. Technol. A, 1987, vol. 5A, p. 3366.10.1116/1.574197 ↗
7. V.K. Tolpygo and D.R. Clarke: Acta Mater., 2000, vol. 48, p. 3283.10.1016/S1359-6454(00)00156-7 ↗
8. D.R. Mumm, A.G. Evans, and I.T. Spitsberg: Acta Mater., 2001, vol. 49, p. 2329.10.1016/S1359-6454(01)00071-4 ↗
9. M.Y. He, A.G. Evans, and J.W. Hutchinson: Acta Mater., 1999, vol. 47, p. 2593.10.1016/S1359-6454(99)00145-7 ↗
10. M.Y. He, A.G. Evans, and J.W. Hutchinson: Acta Mater., 2000, vol. 48, p. 2593.10.1016/S1359-6454(00)00053-7 ↗
11. J.M. Ambrico, M.R. Begley, and E.H. Jordan: Acta Mater., 2001, vol. 49, p. 1577.10.1016/S1359-6454(01)00059-3 ↗
12. A.M. Karlsson and A.G. Evans: Acta Mater., 2001, vol. 49, p. 1793.10.1016/S1359-6454(01)00073-8 ↗
13. M.Y. He, J.W. Hutchinson, and A.G. Evans: Acta Mater., 2002, vol. 50, p. 1063.10.1016/S1359-6454(01)00406-2 ↗
14. A.M. Karlsson, T. Xu, and A.G. Evans: Acta Mater., 2002, vol. 50, p. 1211.10.1016/S1359-6454(01)00422-0 ↗
15. A.M. Karlsson, J.W. Hutchinson, and A.G. Evans: J. Mech. Physics Solids, 2002, vol. 50, p. 1565.10.1016/S0022-5096(02)00003-0 ↗
16. A.M. Karlsson, J.W. Hutchinson, and A.G. Evans: Mater. Sci. Eng., 2003, vol. A351, p. 244.10.1016/S0921-5093(02)00843-2 ↗
17. D. Pan, M.W. Chen, P.K. Wright, and K.J. Hemker: Acta Mater., 2003, vol. 51, p. 2205.10.1016/S1359-6454(03)00014-4 ↗
18. M.R. Jackson and J.R. Rairden: Metall. Trans. A, 1977, vol. 8A, pp. 1697–1707.10.1007/BF02646872 ↗
19. M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, and G.H. Meier: Z. Metallk., 1999, vol. 90, p. 1069.
20. Y. Zhang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2679–87.10.1007/s11661-999-0308-1 ↗
21. P.L. Potapov, P. Ochin, J. Pons, and D.S. Schryvers: Acta Mater., 2000, vol. 48, p. 3833.10.1016/S1359-6454(00)00188-9 ↗
22. M.W. Chen, B. Sun, D. Chen, Z. Liu, and D.L. Lin: Mater. Lett., 1996, vol. 28, p. 513.10.1016/0167-577X(96)00119-X ↗
23. I.M. Robertson and C.M. Wayman: Phil. Mag. A, 1983, vol. 48A, p. 421.10.1080/01418618308234902 ↗
24. M.W. Chen, R.T. Ott, T.C. Hufnagel, P.K. Wright, and K.J. Hemker: Surface Coating Technol., 2003, vols. 163–164, p. 25.10.1016/S0257-8972(02)00591-1 ↗
25. K. Enami, A. Nagasawa, and S. Nenno: Scripta Metall., 1978, vol. 12, p. 223.10.1016/0036-9748(78)90102-3 ↗
26. K. Otsuka, T. Ohba, M. Tokonami, and C.M. Wayman: Scripta Metall. Mater., 1993, vol. 29, p. 1359.10.1016/0956-716X(93)90139-J ↗
27. M. Chandrasekaran and L. Delaey: J. Phys. IV, 1982, vol. C4, p. 661.
28. B. Gleeson, W. Wang, and D.J. Sordelet: Iowa State University, Ames, IA, unpublished research, 2001.
29. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prussner, and K.B. Alexander: Mater. Sci. Eng. A, 1998, vol. 245A, p. 201.10.1016/S0921-5093(97)00851-4 ↗
30. N. Rusovic and H. Warlimont: Phys. Status Solidi, 1977, vol. A44, p. 609.10.1002/pssa.2210440225 ↗
31. M.W. Chen, M.L. Glynn, R.T. Ott, T.C. Hufnagel, P.K. Wright, and K.J. Hemker: Acta Mater., 2003, vol. 51/14, pp. 4279–94.10.1016/S1359-6454(03)00255-6 ↗
32. M. Glynn: Ph.D. Dissertation, 2002, Johns Hopkins Univ., Baltimore, MD.
33. V.K. Tolpygo and D.R. Clarke: University of California Santa Barbara, Santa Barbara, CA, unpublished research, 2002.