journal article·2005-05

Electrochemical methods to detect susceptibility of Ni-Cr-Mo-W alloy 22 to intergranular corrosion

D. D. Gorhe, K. S. Raja, S. A. Namjoshi, Velimir Radmilovic, Alfredo Tolly, D. A. Jones

Publisher page

Abstract

Alloy 22 (UNS N06022), a Ni-Cr-Mo-W based alloy, is a candidate material for the outer wall of nuclear waste package (NWP) containers. Even though the alloy is highly stable at low temperatures, it could undergo microstructural changes during processing such as welding and stress relieving. Formation of topologically close-packed (TCP) phases such as μ, P, σ, etc. and Cr-rich carbides could make the material susceptible to localized corrosion. Hence, it is important to correlate the microstructural changes with the corrosion resistance of the alloy by nondestructive and rapid electrochemical tests. In this investigation, different electrochemical test solutions were used to quantify the microstructural changes associated with aging and welding of the wrought alloy 22. The results of double-loop (DL) electrochemical potentiodynamic reactivation (EPR) tests in 1 M H2SO4+0.5 M NaCl+0.01 M KSCN solution indicated Cr depletion during initial stages of aging of wrought alloy 22. Results of EPR tests in 2 M HCl+0.01 M KSCN solution at 60 °C correlated well with the Mo depletion that occurred near TCP phases formed during aging of both weld and wrought alloy 22 materials. The EPR test results were compared with standard chemical weight loss measurements specified by ASTM standard G-28 methods A and B.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. T.S. Edgecumbe Summers, M.A. Wall, M. Kumar, S.J. Mathews, and R.B. Rebak: Scientific Basis for Nuclear Waste Management XXII, Materials Research Society Symposium Proceedings, D.J. Wronkiewicz and J.H. Lee, eds., Materials Research Society, Warrendale, PA, 1999, vol. 556, pp. 919–26.
2. R.B. Rebak, T.S. Edgecumbe Summers, and R.M. Carranza: Scientific Basis for Nuclear Waste Management XXIII, Materials Research Society Symposium Proceedings, R.W. Smith and D.W. Shoesmith, eds., Materials Research Society, Warrendale, PA, 2000, vol. 608, pp. 109–14.
3. T.S. Edgecumbe Summers, R.B. Rebak, T.A. Palmer, and P. Crook: Scientific Basis for Nuclear Waste Management XXV, Materials Research Society Symposium Proceedings, B.P. McGrail and G.A. Cragnolino, eds., Materials Research Society, Warrendale, PA, 2002, vol. 713, pp. 45–52.
4. Yucca Mountain Science and Engineering Report, Rev. 1, Feb. 2002 (DOE/RW-0539, Rev. 1 [www.ymp.gov/documents/ser_b/index.htm]).
5. M.J. Cieslak, T.J. Headley, and A.D. Romig Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 2035–46.10.1007/BF02645001 ↗
6. J.S. Ogborn, D.L. Olson, and M.J. Cieslak: Mater. Sci. Eng., 1995, vol. A203, pp. 134–39.10.1016/0921-5093(95)09832-1 ↗
7. M.J. Cieslak, G.A. Knorovsky, T.J. Headley, and A.D. Romig, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 2107–16.10.1007/BF02645909 ↗
8. U.L. Heubner, E. Altpeter, M.B. Rockel, and E. Wallis: Corrosion, 1989, vol. 45, pp. 249–58.10.5006/1.3577851 ↗
9. D. Peckner and I.M. Bernstein: Handbook of Stainless Steels, McGraw-Hill Book Co., New York, NY, 1977, pp. 4–53.
10. A. Turnbull, P.E. Francis, M.P. Ryan, L.P. Orkney, A.J. Griffiths, and B. Awkins: Corrosion, 2002, vol. 58, pp. 1039–48.10.5006/1.3280793 ↗
11. H. Samans, A.R. Meyer, and G.F. Tisinai: Corrosion, 1966, vol. 22, pp. 336–41.10.5006/0010-9312-22.12.336 ↗
12. R.B. Leonard: Corrosion, 1969, vol. 25, pp. 222–28.10.5006/0010-9312-25.5.222 ↗
13. M.A. Streicher: Corrosion, 1976, vol. 32, pp. 79–85.10.5006/0010-9312-32.3.79 ↗
14. F.G. Hodge and R.W. Kirchner: Corrosion, 1976, vol. 32, pp. 332–39.10.5006/0010-9312-32.8.332 ↗
15. M. Raghavan, B.J. Berkowitz, and J.C. Scanlon: Metall. Trans. A, 1982, vol. 13A, pp. 979–84.10.1007/BF02643394 ↗
16. U. Heubner and M. Kohler: Werkstoffe Korr., 1992, vol. 43, p. 181.10.1002/maco.19920430502 ↗
17. D.S. Dunn, Y.-M. Pan, and G.A. Cragnolino: Corrosion, NACE, Houston, TX, 2000, paper no. 00206.
18. G.S. Was and R.M. Kruger: Acta Metall., 1985, vol. 33, pp. 841–54.10.1016/0001-6160(85)90108-7 ↗
19. R.M. Kruger, S.F. Claeys, and G.S. Was: Corrosion, 1985, vol. 41, pp. 504–12.10.5006/1.3583020 ↗
20. H.M. Tawancy: J. Mater. Sci., 1996, vol. 31, pp. 3929–36.10.1007/BF00352653 ↗
21. Z. Fang, Y.S. Wu, L. Zhang, and J.Q. Li: Corrosion, 1998, vol. 54, pp. 339–45.10.5006/1.3284860 ↗
22. N. Lopez, M. Cid, M. Puiggali, I. Azkarate, and A. Pelayo: Mater. Sci. Eng. A, 1997, vol. 229, pp. 123–28.10.1016/S0921-5093(97)00008-7 ↗
23. F.G. Hodge: Corrosion, 1973, vol. 29, pp. 375–83.10.5006/0010-9312-29.10.375 ↗
24. R.M. Kruger and G.S. Was: Metall. Trans. A, 1988, vol. 19A, pp. 2555–62.10.1007/BF02645483 ↗
25. C. Gabrielli: Technical Report No. 004/83, Solartron Instruments. Farnborough, United Kingdom, 1980.
26. Y.M. Pan, D.S. Dunn, G.A. Cragnolino, and N. Sridhar: Metall. Trans. A, 2000, vol. 31A, pp. 1163–73.10.1007/s11661-000-0112-4 ↗
27. K. Miyata and M. Igarashi: Metall. Trans. A, 1992, vol. 23A, pp. 953–59.10.1007/BF02675570 ↗
28. K.S. Raja, D.D. Gorhe, S.A. Namjoshi, and D.A. Jones: 11th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Stevenson, Washington, Aug. 10–14, 2003, American Nuclear Society, IL, pp. 248–58.
29. K.S. Raja and D.A. Jones: Corrosion, 2003, NACE, Houston, TX, paper no. 03396.