journal article·2000-11

Thermal stability of electroless-nickel/solder interface: Part B. Interfacial fatigue resistance

Pi Lin Liu, Jian Ku Shang

Publisher page

Abstract

The relationship between fatigue resistance and interfacial microstructure was studied along the interface between the Sn-Pb eutectic alloy and an electroless Ni-P coating. The fatigue resistance of the solder interface was measured from the flexural peel fracture mechanics specimens in the asreflowed, mild-aged, and overaged conditions. While the mild aging had only a marginal effect on the fatigue resistance of the interface, overaging was found to significantly degrade the interfacial resistance to fatigue-crack growth, resulting in a lower fatigue threshold and a much earlier onset of the fast fracture. The effects of the overaging were shown to result from the transformation of the interfacial microstructure, which weakened the crack-sliding resistance in the near-threshold regime and embrittled the interface in the high crack-growth rate regime.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S.J. Holden and E.R. Wallach: Int. J. Microcircuits Electronic Packaging, 1999, vol. 22, pp. 80–85.
2. U.D. Perera: Microelectr. Reliability, 1999, vol. 39, pp. 391–99.10.1016/S0026-2714(98)00212-1 ↗
3. L. Leichti and A. Skipor: Int. J. Microcircuits Electronic Packaging, 1999, vol. 22, pp. 57–61.
4. C.H. Zhong and S. Yi: Soldering Surface Mount Technol., 1999, vol. 11, pp. 44–48.10.1108/09540919910254930 ↗
5. Q. Yu and M. Shiratori: IEEE Trans. Components, Packaging Manufacturing Technol. Part A, 1997, vol. 20, pp. 266–73.
6. J.H. Lau: Circuit World, 1997, vol. 23, pp. 22–25.10.1108/03056129710370277 ↗
7. J. Lau, K. Gratalo, E. Schneider, T. Marcotte, and T. Baker: Circuit World, 1995, vol. 22, pp. 27–32.10.1108/03056129610799912 ↗
8. K. Kulojarvi and J. Kivilahti: Microelectr. Int., 1998, vol. 15, pp. 16–19.10.1108/13565369810370328 ↗
9. R.H. Esser, A. Dimoulas, N. Strifas, A. Christou, and N. Papanicolau: Microelectr. Reliability, 1998, vol. 39, pp. 1307–12.
10. M.J. Loboda, R.C. Camilletti, I.A. Goodman, L.K. White, H.L. Pinch, J. Shaw, V.K. Patel, C.P. Wu, and G.M. Adema: Int. J. Microcircuits Electronic Packaging, 1996, vol. 19, pp. 427–34.
11. J.H. Lau: Eng. Fract. Mech., 1993, vol. 45, pp. 643–54.10.1016/0013-7944(93)90270-3 ↗
12. K.J. Lodge and D.J. Pedder: IEEE Trans. Components, Hybrids and Manufacturing Technol., 1990, vol. 13, pp. 847–55.10.1109/33.62529 ↗
13. M. Amagai: Microelectr. Reliability, 1999, vol. 39, pp. 463–77.10.1016/S0026-2714(99)00017-7 ↗
14. J.H. Lau, C. Chang, T. Chen, D. Cheng, and E. Lao: Circuit World, 1998, vol. 24, pp. 11–25.10.1108/03056129810208429 ↗
15. D.R. Halk: Surface Mount Technol., 1997, vol. 11, pp. 54–56.
16. J.S. Hwang: Surface Mount Technol., 1995, vol. 7, pp. 17–18.10.1108/eb037907 ↗
17. H.N. Keller: IEEE Trans. Components, Hybrids Manufacturing Technol., 1981, vol. 4, pp. 132–39.10.1109/TCHMT.1981.1135767 ↗
18. D. Frear, D. Grives, and J.W. Morris, Jr.: J. Electronic Mater., 1989, vol. 18, pp. 671–80.10.1007/BF02657518 ↗
19. T.S.E. Summers and J.W. Morris, Jr.: ASME J. Electronic Packaging, 1990, vol. 112, pp. 94–99.10.1115/1.2904364 ↗
20. S.K. Kang, N.D. Zommer, D.L. Feucht, and R.W. Heckel: IEEE Trans. Parts, Hybrids Packaging, 1977, vol. 13, pp. 318–21.10.1109/TPHP.1977.1135203 ↗
21. D.R. Frear, D. Grivas, and J.W. Morris, Jr.: J. Met., 1988, vol. 40 (6), pp. 18–22.
22. D.R. Frear, D. Grivas, and J.W. Morris, Jr.: J. Electronic Mater., 1988, vol. 17, pp. 171–80.10.1007/BF02652148 ↗
23. J. Seyyedi: ASME J. Electronic Packaging, 1993, vol. 115, pp. 305–11.10.1115/1.2909333 ↗
24. W. Engelmaier and A.I. Attarwala: IEEE Trans. Components, Hybrids Manufacturing Technol., 1989, vol. 12, pp. 284–96.10.1109/33.31435 ↗
25. R.K. Govila, Y.H. Pao, C. Lamer, J. Lau, S. Twerefour, S. Eramus, and S. Dolot: ASME J. Electronic Packaging, 1994, vol. 116, pp. 184–90.10.1115/1.2905684 ↗
26. D. Yao and J.K. Shang: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2677–98.10.1007/BF02669424 ↗
27. D. Yao, Z. Zhang, and J.K. Shang: Trans. ASME J. Electronic Packaging, 1996, vol. 118, pp. 45–48.10.1115/1.2792130 ↗
28. D. Yao and J.K. Shang: Trans. ASME J. Electronic Packaging, 1997, vol. 119, pp. 114–18.10.1115/1.2792212 ↗
29. D. Yao and J.K. Shang: IEEE Trans.: CPMT, 1996, vol. 19, pp. 154–65.
30. J.K. Shang and D. Yao: Trans. ASME J. Electronic Packaging, 1996, vol. 118, pp. 170–73.10.1115/1.2792148 ↗
31. J.K. Shang: Fatigue’96, Pergamon Press, Elmsford, NY, 1996, vol. 1, pp. 43–54.
32. D.R. Frear and P.T. Vianco: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1509–23.10.1007/BF02665483 ↗
33. A.J. Sunwoo, J.W. Morris, Jr., and G.K. Lucey, Jr.: Metall. Trans. A, 1992, vol. 23A, pp. 1323–32.10.1007/BF02665064 ↗
34. Z. Mei, A.J. Sunwoo, and J.W. Morris, Jr.: Metall. Trans. A, 1992, vol. 23A, pp. 857–64.10.1007/BF02675563 ↗
35. Pi Lin Liu, Zhengkui Xu, and Jian Ku Shang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2857–66.10.1007/BF02830353 ↗
36. Z. Mei, P. Callery, D. Fisher, F. Hua, and J. Glazer: Advances in Electronic Packaging, ASME, New York, NY, 1997, vol. 2, pp. 1543–50.
37. D.B. Bogy: J. Appl. Mech., 1968, vol. 35, pp. 460–66.10.1115/1.3601236 ↗
38. D.B. Bogy: Int. J. Solids Struct., 1970, vol. 6, pp. 1287–1313.10.1016/0020-7683(70)90104-6 ↗
39. D. Munz and Y.Y. Yang: J. Appl. Mech., 1992, vol. 59, pp. 857–61.10.1115/1.2894053 ↗
40. J.R. Rice: J. Appl. Mech., 1988, vol. 55, pp. 98–103.10.1115/1.3173668 ↗
41. J.W. Hutchinson and Z. Suo: in Advances in Applied Mechanics, J.W. Hutchinson and E.M. Wu, eds., Academic Press, San Diego, CA, 1992, vol. 29, pp. 64–187.
42. M.D. Thouless: Acta Mater., 1990, vol. 38, pp. 1135–40.10.1016/0956-7151(90)90186-K ↗
43. Z. Zhang and J.K. Shang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 205–11.10.1007/BF02647760 ↗
44. P.L. Liu and J.K. Shang: University of Illinois at Urbana-Champaign, Urbana, IL, unpublished research, 1999.
45. H.N. Keller: IEEE Trans. Comp. Hybrids, Manuf. Technol., 1986, vol. 9, pp. 433–39.10.1109/TCHMT.1986.1136673 ↗
46. D.R. Frear, F.M. Hosking, and P.T. Vianco: Materials Developments in Microelectronic Packaging Conf. Proc., Montreal, 1991, pp. 229–40.