journal article·2004-08

Characterization of surface deformation around vickers indents in monocrystalline materials

P. Peralta, R. Ledoux, M. Hakik, R. Dickerson, P. Dickerson

Publisher page

Abstract

The deformation surrounding Vickers indents on copper and MoSi2 monocrystals has been characterized for two orientations of the indenter diagonals using optical, electron, and scanning probe microscopy. The surface topography around the indents was characterized using atomic force microscopy (AFM), whereas orientation imaging microscopy (OIM) was used to map the local crystallographic orientation of the surface surrounding one indent on copper and measure lattice rotations due to plastic strain. The results indicate that sink-in and pile-up behavior depend on in-plane crystallographic orientations rather than the orientation of the indenter. Regions with multiple slip show larger lattice rotations and sink-in, whereas regions with lower slip density have smaller lattice rotations and show pile-ups. Strains outside one indent were obtained from OIM data using kinematical relations for single-crystal plasticity. A von Mises strain of 29 pct next to the middle of indent edge on the surface of the sample was deduced from the analysis. This agrees well with the characteristic strain reported for Vickers indents.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
2. S. Suresh and A.E. Giannakopoulos: Acta Mater., 1998, vol. 46, pp. 5755–67.10.1016/S1359-6454(98)00226-2 ↗
3. S. Venkataraman, D.L. Kohlstedt, and W.W. Gerberich: J. Mater. Res., 1993, vol. 8, pp. 685–88.10.1557/JMR.1993.0685 ↗
4. T.A. Laursen and J.C. Simo: J. Mater. Res., 1992, vol. 7, pp. 618–26.10.1557/JMR.1992.0618 ↗
5. K. Zeng, E. Söderlund, A.E. Giannakopoulos, and D.J. Rowcliffe: Acta Mater., 1996, vol. 44, pp. 1127–41.10.1016/1359-6454(95)00196-4 ↗
6. P.H. Boldt, J.D. Embury, and G.C. Weatherly: Mater. Sci. Eng., 1992, vol. A155, pp. 251–58.10.1016/0921-5093(92)90331-T ↗
7. A.E. Giannakopoulos and S. Suresh: Scripta Mater., 1999, vol. 40, pp. 1191–98.10.1016/S1359-6462(99)00011-1 ↗
8. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Cer. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
9. D.F. Bahr, D.E. Kramer, and W.W. Gerberich: Acta Mater., 1998, vol. 46, pp. 3605–3617.10.1016/S1359-6454(98)00024-X ↗
10. W.W. Gerberich, J.C. Nelson, E.T. Lilleodden, P. Anderson, and J.T. Wyrobek: Acta Mater., 1996, vol. 44, pp. 3585–98.10.1016/1359-6454(96)00010-9 ↗
11. G.M. Pharr and W.C. Oliver: J. Mater. Res., 1989, vol. 4, pp. 94–101.10.1557/JMR.1989.0094 ↗
12. S.A.S. Asif and J.B. Pethica: Phil. Mag. A, 1997, vol. 76, pp. 1105–18.10.1080/01418619708214217 ↗
13. C.A. Brookes, J.B. O’Neill, and B.A.W. Redfern: Proc. R. Soc. London A, 1971, vol. 322, pp. 73–88.10.1098/rspa.1971.0055 ↗
14. M. Garfinkle and R.G. Garlick: Trans. TMS-AIME, 1968, vol. 242, pp. 809–14.
15. S. Kobayashi, T. Okui, and S. Miura: J. Mater. Sci., 1993, vol. 28, pp. 3506–12.10.1007/BF01159830 ↗
16. D. Kramer, H. Huang, M. Kriese, J. Robach, J. Nelson, A. Wright, D. Bahr, and W. Gerberich: Acta Mater., 1999, vol. 47, pp. 333–43.10.1016/S1359-6454(98)00301-2 ↗
17. S. Harvey, H. Huang, S. Venkataraman, and W.W. Gerberich: J. Mater. Res., 1993, vol. 8, pp. 1291–99.10.1557/JMR.1993.1291 ↗
18. S.B. Luyckx, F.R.N. Nabarro, S.-W. Wai, and M.N. James: Acta Metall. Mater., 1992, vol. 40, pp. 1623–27.10.1016/0956-7151(92)90104-M ↗
19. Q. Ma and D.R. Clarke: J. Mater. Res., 1995, vol. 10, pp. 853–63.10.1557/JMR.1995.0853 ↗
20. T.F. Page, W.C. Oliver, and C.J. McHargue: J. Mater. Res., 1992, vol. 7, pp. 450–73.10.1557/JMR.1992.0450 ↗
21. S.G. Roberts, P.D. Warren, and P.B. Hirsch: J. Mater. Res., 1986, vol. 1, pp. 162–75.10.1557/JMR.1986.0162 ↗
22. S.G. Roberts, P.D. Warren, and P.B. Hirsch: Mater. Sci. Eng., 1988, vol. A105, pp. 19–28.10.1016/0025-5416(88)90476-4 ↗
23. N.A. Stelmashenko and L.M. Brown: Phil. Mag. A, 1996, vol. 74, pp. 1199–206.10.1080/01418619608239719 ↗
24. M.G. Walls, M.M. Chaudhri, and T.B. Tang: J. Phys. D, 1992, vol. 25, pp. 500–07.10.1088/0022-3727/25/3/025 ↗
25. W. Zielinski, H. Huang, S. Venkataraman, and W.W. Gerberich: Phil. Mag. A, 1995, vol. 72, pp. 1221–73.10.1080/01418619508236252 ↗
26. J. Alcalá, A.C. Barone, and M. Anglada: Acta Mater., 2000, vol. 48, pp. 3451–64.10.1016/S1359-6454(00)00140-3 ↗
27. S.A. Maloy, A.H. Heuer, J.J. Lewandowski, and T.E. Mitchell: Acta Metall. Mater., 1992, vol. 40, pp. 3159–65.10.1016/0956-7151(92)90479-X ↗
28. T.B. Reed and E.R. Pollard: J. Cryst. Growth, 1968, vol. 2, pp. 243–47.10.1016/0022-0248(68)90008-0 ↗
29. S.A. Maloy, T.E. Mitchell, and A.H. Heuer: Acta Metall. Mater., 1995, vol. 43, pp. 657–68.10.1016/0956-7151(94)00260-O ↗
30. P.H. Boldt, G.C. Weatherly, and J.D. Embury: J. Mater. Res., 2000, vol. 15, pp. 1025–32.10.1557/JMR.2000.0146 ↗
31. D.F. Bahr and W.W. Gerberich: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3793–800.10.1007/BF02595628 ↗
32. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998.
33. A.H. Shalaby and K.S. Havner: J. Mech. Phys. Solids, 1978, vol. 26, pp. 79–92.10.1016/0022-5096(78)90015-7 ↗
34. K.S. Havner: J. Mech. Phys. Solids, 1979, vol. 27, pp. 415–29.10.1016/0022-5096(79)90023-1 ↗
35. P. Peralta and R. Dickerson: unpublished research, Arizona State University, and Los Alamos National Laboratory, respectively, 2003.
36. A.E. Giannakopoulus, P.-L. Larsson, and R. Vestergaard: Int. J. Solid Struct., 1994, vol. 31, pp. 2679–2708.10.1016/0020-7683(94)90225-9 ↗
37. M.M. Chaudhri: Acta Mater., 1998, vol. 46, pp. 3047–56.10.1016/S1359-6454(98)00010-X ↗